NABEYA Vises

• 

  C Clamp

  NABEYA

  [Features]
  · It is for light work in steel-plate pressing.
  · Lower price with mass production.
  · The handle is unichrome plated.

  Standard Price:	SGD 5.97-
  Days to Ship:	4 Day(s) or more

• 

  Precision Parallel Block Set

  NABEYA

  [Features]
  · The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
  · S50C type hardened to HRC46-53 with improved wear resistance.
  · Comes inside a strong wooden storage case.
  · Also sold separately.
  · By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floating

  Standard Price:	SGD 718.78-
  Days to Ship:	4 Day(s) or more

• 

  Tool maker's vise

  NABEYA

  [Features]
  · Made of fully quenched materials, this is a precision tool that is finished by polishing.
  · The accuracy is within 5 microns in both squareness and parallelism.
  · Each machine comes with a beautiful wooden box case.

  Standard Price:	SGD 1,940.94-
  Days to Ship:	7 Day(s) or more

• 

  JIS Vise

  NABEYA

  For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.

  Standard Price:	SGD 528.18-
  Days to Ship:	4 Day(s) or more

• 

  Guide Block【2 Pieces Per Package】

  NABEYA

  S45C machine vise series guide block.

  Standard Price:	SGD 53.34-
  Days to Ship:	4 Day(s) or more

• 

  Yankee Vise Rear Panel

  NABEYA

  Precision small boring machine vise rear plate.

  Standard Price:	SGD 27.03-
  Days to Ship:	7 Day(s) or more

• 

  Woodwork Vise (Above Table Type) Spindle

  NABEYA

  [Features]
  Spindle parts for cargo net vise (bench type).
  Compatible models are HW4C (HW4C-SP) and HW6C (HW6C-SP).

  Standard Price:	SGD 18.71-
  Days to Ship:	12 Day(s) or more

• 

  Loctite Precision Machine Vise

  NABEYA

  The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.

  Standard Price:	SGD 1,265.57-
  Days to Ship:	6 Day(s) or more

• 

  Mounting Clamp Set【2 Pieces Per Package】

  NABEYA

  Mounting clamp for machining vise.

  Standard Price:	SGD 107.37-
  Days to Ship:	4 Day(s) or more

• 

  Loctite MC Precision Machine Vise

  NABEYA

  When using in parallel, multiple units can be installed as it has no flange. The parallel accuracy of the parallel specification is within 0.01. Can also be used while turned sideways.

  Standard Price:	SGD 2,267.30-
  Days to Ship:	7 Day(s) or more

• 

  Loctite 5-Axis Machine Vise

  NABEYA

  Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Loctite lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.

  Standard Price:	SGD 2,902.61-
  Days to Ship:	7 Day(s) or more

• 

  Loctite Double Clamp Vise

  NABEYA

  Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Loctite lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.

  Standard Price:	SGD 3,852.60-
  Days to Ship:	7 Day(s) or more

• 

  Loctite Precision Machine Vise L Type

  NABEYA

  The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.

  Standard Price:	SGD 1,417.11-
  Days to Ship:	6 Day(s) or more

• 

  FA Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A standard fitting for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Standard Price:	SGD 161.90-
  Days to Ship:	6 Day(s) or more

• 

  Pull Down Vise【2 Pieces Per Package】

  NABEYA

  Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.

  Standard Price:	SGD 676.00-
  Days to Ship:	4 Day(s) or more

• 

  Loctite MC Jig Vise

  NABEYA

  A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.

  Standard Price:	SGD 9,461.55
  Days to Ship:	7 Day(s) or more

• 

  Loctite CV Precision Machine Vise Jaws

  NABEYA

  Standard clamp for machining vise.

  Standard Price:	SGD 191.88-
  Days to Ship:	4 Day(s) or more

• 

  Clamp Master Vise Knob (Black)

  NABEYA

  [Features]
  Holding Ball part of clamp master vise (Black).
  Compatible models are EVS200-8.

  Standard Price:	SGD 37.93
  Days to Ship:	11 Day(s) or more

• 

  Vise Mounting Bolt Set【3 Pieces Per Package】

  NABEYA

  Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.

  Standard Price:	SGD 21.27-
  Days to Ship:	4 Day(s) or more

• 

  Yankee Vise Spindle

  NABEYA

  Precision Small Boring Machine Vise Spindle

  Standard Price:	SGD 39.17-
  Days to Ship:	4 Day(s) or more

• 

  Clamp Master Vise Locking Ring

  NABEYA

  [Features]
  Locking ring parts for clamp master vise.
  Compliant models are EVS, ETS, EPA, ETPA-75-3 (EVS75-LR), EVS, ETS, EPA, ETPA-100-4 (EVS100-LR), EVS, EPA-150-6 (EVS150-LR), EVS200-8 (EVS200-LR).

  Standard Price:	SGD 37.17-
  Days to Ship:	11 Day(s) or more

• 

  Woodworking Vise for School Materials (Tabletop Type)

  NABEYA

  A tool type that can be mounted on the top surface of a workbench. The main body and movable parts are made of tough cast iron FC250. The screw is trapezoidal type and strong tightening is possible. Stopper balls are integrated casting, so they will not come off. All parts are compatible and replaceable.

  Standard Price:	SGD 202.90
  Days to Ship:	4 Day(s) or more

• 

  Engineer's Vise Pin (for Spindle)

  NABEYA

  [Features]
  A lead type vise · A sturdy heavy-duty lead type vise.
  A pin (for spindle) part.
  ·Compatible vise: 75/100/125,150,127/200/250

  Standard Price:	SGD 2.71-
  Days to Ship:	6 Day(s) or more

• 

  Aluminum Double Clamp Vise Cap Set

  NABEYA

  [Features]
  · A cap set for the Loctite aluminum double clamp vise.
  · 2 Movable Bodies / 1 Fixed Jaw

  Standard Price:	SGD 327.45
  Days to Ship:	22 Day(s) or more

• 

  Loctite Quick ONE Vise

  NABEYA

  The mechanical pressure increase mechanism can easily increase the pressure in 1 rotation, with minimal effect of changing temperature on the tightening force and no tool replacement, etc., required. Easy to set the tightening force by simply turning the adjustment dial by hand. Once the tightening force is set, the structure allows operation only at that tightening force. LTFH type is a vertical/horizontal machining center type that's used with angle plate adhered.

  Standard Price:	SGD 2,781.10-
  Days to Ship:	6 Day(s) or more

• 

  Maker's Vise Wedge locking tool

  NABEYA

  [Features]
  · The accuracy is higher than the former JIS 0 class.
  · Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
  · Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
  · Back surface has a guide block so precision can be easily improved

  Standard Price:	SGD 1,826.38-
  Days to Ship:	7 Day(s) or more

• 

  Jig Vise Jaw Plates

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	SGD 351.27
  Days to Ship:	7 Day(s) or more

• 

  Handle Joint for Loctite CV Precision Machine Vise

  NABEYA

  [Features]
  A component for Lock-Tight CV Precision Machine Vises.
  A handle joint.
  · RoHS compliant
  ·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
  ·Compatible models: Common to all CV models

  Standard Price:	SGD 54.55-
  Days to Ship:	7 Day(s) or more

• 

  Beta Vise Spindle

  NABEYA

  The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.

  Standard Price:	SGD 42.83
  Days to Ship:	6 Day(s) or more

• 

  Foot Jaw

  NABEYA

  Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.

  Standard Price:	SGD 500.60-
  Days to Ship:	7 Day(s) or more

• 

  Flat Jaw Plates for 5-Axis Machine Vise

  NABEYA

  [Features]
  A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
  ·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)

  Standard Price:	SGD 99.28-
  Days to Ship:	7 Day(s) or more

• 

  Joint bar

  NABEYA

  [Features]
  A Joint bar for Lock-Tight MC Jig Vises.
  ·Effective length: 0 mm / 150 mm

  Standard Price:	SGD 51.16-
  Days to Ship:	7 Day(s) or more

• 

  2 piece vise

  NABEYA

  [Features]
  · Capable of easily clasping long objects that cannot be tightened with machine vises.
  · Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
  · Convenient for processing of mass produced products.
  · Large opening depth.

  Standard Price:	SGD 1,147.28-
  Days to Ship:	6 Day(s) or more

• 

  Beta Vise

  NABEYA

  The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.

  Standard Price:	SGD 138.36-
  Days to Ship:	4 Day(s) or more

• 

  Work Stop

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	SGD 76.07-
  Days to Ship:	6 Day(s) or more

• 

  Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】

  NABEYA

  Standard clamp (coarse) for pull-down vise (free jaw vise).

  Standard Price:	SGD 84.89-
  Days to Ship:	9 Day(s) or more

• 

  Machine Vise Handle

  NABEYA

  Machine vise handle.
  [Features]
  · Machine vise replacement part.
  · Optional part for the machine vise series.
  [Application]
  · Replacement handle for the machine vise.

  Standard Price:	SGD 61.36-
  Days to Ship:	4 Day(s) or more

• 

  Mold Vise

  NABEYA

  Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.

  Standard Price:	SGD 2,911.44-
  Days to Ship:	7 Day(s) or more

• 

  Loctite Precision Machine Vise Jaws

  NABEYA

  Optional parts for the machining vise series.

  Standard Price:	SGD 161.90-
  Days to Ship:	4 Day(s) or more

• 

  Thin Type Parallel Block

  NABEYA

  [Features]
  · The height is designed with the jaw depth of the vise in mind.
  · A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
  · A 2-piece set.

  Standard Price:	SGD 193.82-
  Days to Ship:	4 Day(s) or more

• 

  CV Vise Chip Cover

  NABEYA

  Loctite CV precise machine vise parts.

  Standard Price:	SGD 53.07
  Days to Ship:	4 Day(s) or more

• 

  FA Step Mouthpiece for Machine Vise

  NABEYA

  [Features]
  A step jaw plate for Machine Vise Series.
  ·Thread diameter: M8/M10/M12
  ·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175Q

  Standard Price:	SGD 191.88-
  Days to Ship:	6 Day(s) or more

• 

  JIS Vise Collar

  NABEYA

  [Features]
  A JIS vise collar for horizontal vise parts.
  ·Compatible vise: A75/A100/A125/A150

  Standard Price:	SGD 15.13-
  Days to Ship:	8 Day(s) or more

• 

  JIS Vise Mouthpiece (2 Pieces 1 Set)

  NABEYA

  [Features]
  · JIS vise base (2-piece set) for side-vise parts

  Standard Price:	SGD 72.89-
  Days to Ship:	4 Day(s) or more

• 

  Clamp Master Vise Guide Bar

  NABEYA

  [Features]
  Guide bar parts for clamp master vise.
  Compatible models are EVS, ETS, EPA, ETPA-75-3 (EVS75-GB), EVS, ETS, EPA, ETPA-100-4 (EVS100-GB), EVS, EPA-150-6 (EVS150-GB), EVS200-8 (EVS200-GB).

  Standard Price:	SGD 45.01-
  Days to Ship:	11 Day(s) or more

Loading...