NABEYA Jigs for Manual Tightening

• 

  Knob for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	SGD 21.22
  Days to Ship:	7 Day(s) or more

• 

  Guide Block (Straight Type)【2 Pieces Per Package】

  NABEYA

  Can be used where the groove width of the fixed object and table is the same. When the groove width is different, use the E-605 guide block (stepped) and E-275B guide block.

  Standard Price:	SGD 48.02-
  Days to Ship:	4 Day(s) or more

• 

  Toggle Down Clamp 6830

  NABEYA

  [Features]
  · 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Standard Price:	SGD 48.15-
  Days to Ship:	Same day or more

• 

  Clamp Support Screw Jack

  NABEYA

  Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

  Standard Price:	SGD 42.59-
  Days to Ship:	4 Day(s) or more

• 

  Aluminum Base Jack

  NABEYA

  Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.

  Standard Price:	SGD 112.86-
  Days to Ship:	6 Day(s) or more

• 

  Adjusting Clamp

  NABEYA

  Clamps for fixing workpieces on machining centers, milling machines, etc.
  [Features]
  ·Standard type with T-slot bolt.
  [Applications]
  ·Convenient for fixing the workpiece.

  Standard Price:	SGD 82.60-
  Days to Ship:	4 Day(s) or more

• 

  Rubber Cap 6893

  NABEYA

  Dedicated clamping screw for toggle clamps.

  Standard Price:	SGD 5.85-
  Days to Ship:	4 Day(s) or more

• 

  Low Edge Clamp (One Sided Type)

  NABEYA

  [Features]
  · It is a compact clamp that does not lift much.
  · Ideal for machining thin, low-profile objects.
  · There are three sizes of tightening bolts: M4, M6, and M12.
  · It has a compact size and large stroke of 0.3 to 1.1.
  · The guide groove of the main body shortens workpiece setup time (excluding LWC4).
  · It has a structure that prevents chips from entering inside.
  · Ideal for small workpieces.
  · Brass material is used to avoid scratching workpieces.
  · Lifting up of the workpiece is minimal.
  · Ideal for thin workpieces.

  Standard Price:	SGD 18.81-
  Days to Ship:	4 Day(s) or more

• 

  Heavy Type Screw Jack

  NABEYA

  A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.

  Standard Price:	SGD 772.34-
  Days to Ship:	6 Day(s) or more

• 

  Injeck Clamp

  NABEYA

  [Features]
  · The body is made of bainite cast iron and does not get damaged even in excessive tightening.
  · Can also be used for metal press clamps and the metal working clamps of injection molding machines.
  · If a T-slot nut is used, then of course it can also be used with T-groove tables

  Standard Price:	SGD 36.44-
  Days to Ship:	4 Day(s) or more

• 

  Height Cylinder

  NABEYA

  SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.

  Standard Price:	SGD 25.75-
  Days to Ship:	4 Day(s) or more

• 

  Q Lock (Screw Type) Locating Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Standard Price:	SGD 165.96-
  Days to Ship:	4 Day(s) or more

• 

  Locating Pin (Adjustable Diameter Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Standard Price:	SGD 161.32-
  Days to Ship:	4 Day(s) or more

• 

  Eccentric height cylinder

  NABEYA

  SCM420, Hardening HRC60 eccentricity height cylinder.
  Compatible bolts are M12/16.

  Standard Price:	SGD 51.74-
  Days to Ship:	11 Day(s) or more

• 

  Hydraulic single-action compact cylinder

  NABEYA

  [Features]
  · Low pressure/high pressure (0.8 to 25 MPa) push cylinder

  Standard Price:	SGD 251.20
  Days to Ship:	24 Day(s) or more

• 

  Mini Low Height Clamp

  NABEYA

  With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

  Standard Price:	SGD 225.54-
  Days to Ship:	6 Day(s) or more

• 

  Universal Clamp

  NABEYA

  It can steplessly fasten tall and short workpieces.

  Standard Price:	SGD 90.81-
  Days to Ship:	4 Day(s) or more

• 

  Quick lock

  NABEYA

  Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

  Standard Price:	SGD 373.55-
  Days to Ship:	4 Day(s) or more

• 

  Swing Clamp S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Standard Price:	SGD 51.18-
  Days to Ship:	4 Day(s) or more

• 

  Toe Adjusting Clamp

  NABEYA

  [Features]
  · Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
  · Lifting prevention (generates force in the downward direction).
  · Ideal for thin workpieces.
  · Dovetail groove can withstand lateral force.
  · Free Mounting Position

  Standard Price:	SGD 508.26-
  Days to Ship:	6 Day(s) or more

• 

  Toggle Hook Clamp 6848V

  NABEYA

  6848VNI is made of stainless steel. The hook length can be adjusted.

  Standard Price:	SGD 90.87-
  Days to Ship:	4 Day(s) or more

• 

  Heavy Duty Toggle Hook Clamp 6849PH

  NABEYA

  Heavy-duty type hook clamp. The hook length can be adjusted.

  Standard Price:	SGD 369.51-
  Days to Ship:	6 Day(s) or more

• 

  Helical clamp

  NABEYA

  Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.

  Standard Price:	SGD 114.79-
  Days to Ship:	6 Day(s) or more

• 

  Screw Jack Locknut

  NABEYA

  S45C/quenched HRC35±4 screw jack locknut.

  Standard Price:	SGD 28.88
  Days to Ship:	6 Day(s) or more

• 

  Black Oxide Coating Screw Jack (S45C)

  NABEYA

  · Attachment for No. E-9175A can be used for SJK type.
  · SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  Standard Price:	SGD 33.23-
  Days to Ship:	4 Day(s) or more

• 

  Locating Pin Type B with Grip

  NABEYA

  SUM22/quenched HRC locating pin B with grip.

  Standard Price:	SGD 32.51-
  Days to Ship:	4 Day(s) or more

• 

  Rough Guide Pin for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Standard Price:	SGD 42.12-
  Days to Ship:	7 Day(s) or more

• 

  Q Lock Coupling Plug

  NABEYA

  A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.

  Standard Price:	SGD 239.11-
  Days to Ship:	7 Day(s) or more

• 

  Rough Guide Pin for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  Standard Price:	SGD 37.87-
  Days to Ship:	7 Day(s) or more

• 

  Guide Block (Stepped Type)【2 Pieces Per Package】

  NABEYA

  It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.

  Standard Price:	SGD 147.26-
  Days to Ship:	4 Day(s) or more

• 

  Locating Pin Type A with Grip

  NABEYA

  SUM22/quenched HRC locating pin A with grip.

  Standard Price:	SGD 42.86-
  Days to Ship:	9 Day(s) or more

• 

  Locating Pin A Type (Self Cut Product)

  NABEYA

  Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)

  Standard Price:	SGD 23.86-
  Days to Ship:	9 Day(s) or more

• 

  Locating Pin (Adjustable Round Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Standard Price:	SGD 161.32-
  Days to Ship:	6 Day(s) or more

• 

  Locating Pin (Ball DLC)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  Standard Price:	SGD 60.52-
  Days to Ship:	6 Day(s) or more

• 

  Multi Auto-Clamp, Double Side Type [Branched], Standard Type

  NABEYA

  Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.

  Standard Price:	SGD 235.00
  Days to Ship:	6 Day(s) or more

• 

  U Clamp

  NABEYA

  A sturdy U-shaped clamp that is easy to work with.
  [Features]
  ・ Because it is a U type, it can be attached and removed without removing the nut
  ・ Material: S45C
  ・ Surface treatment: Baked coating
  [Applications]
  ・ Used for holding workpiece

  Standard Price:	SGD 286.88
  Days to Ship:	4 Day(s) or more

• 

  Arm Clamp

  NABEYA

  Forged S45C/hardened HRC45 arm clamp.

  Standard Price:	SGD 61.35-
  Days to Ship:	4 Day(s) or more

• 

  Quick Down Clamp (Compact/medium)

  NABEYA

  Flat jaw and angled handle for quick hold down clamp (medium).

  Standard Price:	SGD 392.05-
  Days to Ship:	4 Day(s) or more

• 

  Bar for Quick Lock

  NABEYA

  [Features]
  · Bar for Quick Lock.
  · Annoying thread feeding when clamping is not necessary.
  · A one-action clamp that adopts a cam lock mechanism

  Standard Price:	SGD 43.02-
  Days to Ship:	7 Day(s) or more

• 

  Check plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Standard Price:	SGD 5.96-
  Days to Ship:	7 Day(s) or more

• 

  Clamp Part of Wedge Clamp (For T-shaped grooves)

  NABEYA

  For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

  Standard Price:	SGD 232.63-
  Days to Ship:	6 Day(s) or more

• 

  Wedge Clamp Set (For T-shaped grooves)

  NABEYA

  Wedge clamp set for T-grooves, flat type.

  Standard Price:	SGD 378.89-
  Days to Ship:	4 Day(s) or more

• 

  Swing Clamp Holder S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Standard Price:	SGD 22.53-
  Days to Ship:	4 Day(s) or more

• 

  Swing Clamp Height Adjusting Support

  NABEYA

  Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.

  Standard Price:	SGD 84.86-
  Days to Ship:	4 Day(s) or more

• 

  Double swing clamp S type

  NABEYA

  This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

  Standard Price:	SGD 70.59-
  Days to Ship:	4 Day(s) or more

Loading...