MISUMI Screw Maintenance Components

• 

  Roller Pedestal for Screw

  MISUMI

  [Applications]
  The installation width of the roller can be adjusted in three steps according to the screw diameter. (Supports screw diameters of Φ25 to 200)
  [Features]
  Enables cleaning work while placing and turning screws. The same process applies when checking the external appearance of the screw.

  Standard Price:	SGD 335.43
  Days to Ship:	6 Day(s)

• 

  Wax for Screw Maintenance

  MISUMI

  [Applications]
  · Used to remove caked resin from screws.
  [Features]
  · Large equipment and device are not neccesary.
  · One piece of M-HGMX can be used to clean φ20 screw approximately.

  Standard Price:	SGD 146.13
  Days to Ship:	Same day

• 

  Cylinder Brush

  MISUMI

  [Applications]
  Used to clean cylinders. It is for cleaning hardened cylinders.
  [Features]
  Made for molding machine cylinders, it is unlikely to scratch the cylinder interior.
  Use in combination with the extension shaft (M-WES-S, M-WES-G).
  'For details on the extension shaft, click here
  

  Standard Price:	SGD 24.74-
  Days to Ship:	6 Day(s)

• 

  Copper Gauze

  MISUMI

  [Applications]
  Used to accommodate the removal of caked resin from the screw.
  [Features]
  · Copper Gauze can be wrapped around the screw in a large contact area, comparing to brush, resulting in more effectiveness.　 Furthermore, the Copper Gauze can be used during the polishing process, after applying Wax for Screw Maintenanc(M-HGMX), 　(M-HGMX)　to ensure that the Wax is applied thoroughly.

  Standard Price:	SGD 19.93-
  Days to Ship:	4 Day(s)

• 

  Molding Gloves

  MISUMI

  [Applications]
  M-HML: Use for maintenance of screws, nozzles, band heaters, etc.
  M-HMM: In addition to the M-HML, these gloves are Kevlar blended, resulting in high function gloves with the same resistant properties as cut-resistant gloves.（米国国家規格協会ANSI/ISEA105-2016 CUT LEVEL A3準拠）
  M-HMH: High-temperature gloves for diecasting. Use according to the temperature.

  • Volume Discount

  Standard Price:	SGD 43.17-
  Days to Ship:	6 Day(s)

• 

  Screw Head Disassembly Wrench【1-5 Pieces Per Package】

  MISUMI

  [Applications]
  · Used to remove screw heads from screws.
  [Features]
  · S type can be used for screw heads for 3, 4 and 5-groove. L type is for 4 and 5-groove.
  · Designed to fit to the screw head in balance just by pushing the claw into the holes with engraved numbers 3, 4 and 5 on one side and turning the slotted screw on the push-in side, which enables smooth removal work. The engraving of L type is the numbers 4 and 5.
  · It comes with five claws, each of which can be independently tightened. The tip of the claw is brass, which prevents it from damaging screw heads.

  Standard Price:	SGD 154.22-
  Days to Ship:	6 Day(s)

• 

  Screw Hand Puller

  MISUMI

  [Applications]
  It is used for removing screws from a Injection machine.
  [Features]
  With a screw type adjustment structure, it supports various screw outer diameters.
  The tip of the claw is brass, which prevents it from damaging screws.

  Standard Price:	SGD 373.10-
  Days to Ship:	6 Day(s)

• 

  Soft Vise Liner

  MISUMI

  [Applications]
  Used to fix screws with a vise.
  It has a horizontal V-groove on one side and a 45° V-groove in the vertical direction on the other side, allowing objects with uneven shapes to be fixed in close contact.
  [Features]
  As it has a magnet, it can be easily installed to a vise.
  As it is fixed, screw maintenance can be performed by one person.

  Standard Price:	SGD 56.46
  Days to Ship:	6 Day(s)

• 

  Stainless Steel Gauze

  MISUMI

  [Applications]
  Used to accommodate the removal of caked resin from the screw.
  [Features]
  · Copper Gauze can be wrapped around the screw in a large contact area, comparing to brush, resulting in more effectiveness. Furthermore, the Copper Gauze can be used during the polishing process, after applying Wax for Screw Maintenanc(M-HGMX), (M-HGMX) to ensure that the Wax is applied thoroughly.

  Standard Price:	SGD 169.00
  Days to Ship:	6 Day(s) or more

• 

  Heat-resistant arm cover

  MISUMI

  [Applications]
  ・成形現場用手袋と合わせてお使いください。
  【特長】
  ・ケブラー製ですので、耐熱260度だけでなく耐切創機能（米国国家規格協会ANSI/ISEA105-2016 CUT LEVEL A2準拠）も合わせ持つ高機能腕カバーです。
  ・親指を通す穴があり、袖上がりによる手首の露出を防止します。
  ・装着前の実測長さは約54cmで、上腕までカバーします。

  Standard Price:	SGD 32.90
  Days to Ship:	6 Day(s) or more

• 

  WHEEL BRUSH FOR MOLDING MACHINE

  MISUMI

  [Applications]
  ・射出成形機シリンダの掃除用としてお使いいただけます。
  【特長】
  ・密度の高い真鍮ホイールブラシで、樹脂をピンポイントで狙えます。
  ・シリンダ径にあわせて幅広いサイズをご用意しました。
  ・専用マンドレルM-CWB-M、エキステンションパイプM-EXT-P、電動工具用ジョイントM-EXT-Jとあわせてお使いいただくと効果的です。

  Standard Price:	SGD 21.60-
  Days to Ship:	4 Day(s) or more

• 

  Wheel Brush Mandrel for Molding Machine

  MISUMI

  [Applications]
  ・射出成形機シリンダの掃除用としてお使いいただけます。
  【特長】
  ・成形機用ホイールブラシM-CWB-B専用マンドレルです。
  ・1/4NPTネジ付ですので、エキステンションシャフトM-WES、パイプM-EXTと接続可能です。
  ・電動工具用ジョイントM-EXT-Jとあわせてお使いいただくと効果的です。
  【付属品】
  ・M10ナット　1個、M10用ワッシャ　2個

  Standard Price:	SGD 24.90
  Days to Ship:	4 Day(s) or more

• 

  Extension Pipe

  MISUMI

  [Applications]
  ・射出成形機シリンダの掃除用としてお使いいただけます。
  【特長】
  ・パイプ加工品ですので曲がりにくく、腕の力をブラシまで確実に伝えます。
  電動工具用ジョイントM-EXT-Jとあわせてお使いいただくと効果的です。
  【付属品】1/4NPT両端メスソケット　2個

  Standard Price:	SGD 64.40
  Days to Ship:	6 Day(s) or more

• 

  Extension Joint(Shaft Diameter φ8, Joint 1/4 NPT)

  MISUMI

  [Applications]
  ・射出成形機シリンダの掃除用としてお使いいただけます。
  【特長】
  ・電動工具で把持でき、作業の効率があがります。
  ・エキステンションシャフトM-WES、エキステンションパイプM-EXT-Pに接続できます。

  Standard Price:	SGD 46.50
  Days to Ship:	6 Day(s) or more

• 

  NOZZLE CLEANING BRUSH

  MISUMI

  [Applications]
  ・射出成形機ノズルの掃除用としてお使いいただけます。
  【特長】
  ・今までの針金を使った掃除とくらべ、効率を上げられます。
  ・ブラシ両端を交互に引っ張りながら掃除しますので、ブラシが曲がっても使えます。

  Standard Price:	SGD 49.30-
  Days to Ship:	4 Day(s) or more

• 

  Nozzle Cleaning Tool

  MISUMI

  [Applications]
  ・射出成形機ノズル内側の掃除用としてお使いいただけます。
  【特長】
  ・先端角度付ですので、こびりついた樹脂を削り取りやすいです。
  ・硬度HRC40～45です。

  Standard Price:	SGD 31.40-
  Days to Ship:	4 Day(s) or more

• 

  TORQUE WRENCH ADAPTER

  MISUMI

  [Applications]
  ・射出成形機スクリューヘッド（二面幅あり）の締付トルク管理用としてお使いいただけます。
  【特長】
  ・真鍮保護プレート付ですので、スクリューヘッドの傷つきを防止します。
  トルク管理することで、締めすぎによる破損の防止や、不具合の低減につながります。

  Standard Price:	SGD 307.20-
  Days to Ship:	8 Day(s) or more

Loading...