IMAC Lamp Fixtures for Inspection

• 

  Direct Ring Light (Direct Light) IDR Series

  IMAC

  This general-purpose ring light supports a diverse range of visual inspections.
  [Features]
  · A high concentration of shell type LEDs is mounted, and light can be effectively focused on the center by the angle of the circuit board.
  · The tilt is ideal for inspecting for scratches, edges, and alignment markings.
  · The lineup contains various sizes, from standard outer diameters of 32 mm / internal diameter 10 mm to external diameter 140 mm/ internal diameter 95 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Optimized for character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 297.24-
  Days to Ship:	8 Day(s) or more

• 

  Square Edgelight Illuminator (Surface Emitting, Thin Type) IFLA/IFL Series

  IMAC

  Thin surface light-emitting fitting.
  Backlight illumination achieves vivid silhouette images. The IFLA series has a 6 mm thickness that allows it to be installed even in places without much space. Energy saving/low heat-generation type with uniform surface emission.

  CAD ：

  2D / 3D

  Standard Price:	SGD 355.91-
  Days to Ship:	8 Day(s) or more

• 

  Horizontal Opposed Ring Light (Direct Light) IDRA-T Series

  IMAC

  General-purpose ring lighting that can emphasize irregularities by irradiation in the horizontal direction.
  [Features]
  · Shell type LEDs are mounted horizontally.
  · Ideal for edge detection and minute scratch inspection using horizontal irradiation.
  · The lineup contains various sizes, from standard outer diameters of 78 mm / internal diameter 46 mm to external diameter 206 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and fine scratches or dirt.
  · Useful for reading engraved text on metal surfaces.
  · Optimal for circuit board and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 737.60-
  Days to Ship:	13 Day(s) or more

• 

  Bar Lighting (Direct Light / Diffused Light) IDBA Series

  IMAC

  General purpose bar lighting.
  It can be used widely, including oblique irradiation and transmission applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 223.86-
  Days to Ship:	13 Day(s) or more

• 

  Collimate Light (Pseudo Collimated Light) IBF Series

  IMAC

  Pseudo collimated light source capable of long distance irradiation several tens of meters away.
  [Features]
  · Usable as a backlight in combination with a telecentric lens.
  · Parallel light prevents light wraparound, thus optimizing for shape inspections of transparent items and shape/dimension inspection of screws, etc.
  · Parallel light emission enables illumination tens of meters forward as well.
  · Can be used for factory indicator lights or situations where the equipment environment prevents lighting from being placed nearby.
  · Ideal for local irradiation as light does not spread. Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.
  [Applications]
  · Convenient for size and shape inspections of electronic parts and lead frame dimensions.
  · Ideal for measuring the pitch of connector pins and for edge extraction of substrates and sheets.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,001.69-
  Days to Ship:	18 Day(s) or more

• 

  Narrow-Angle Light Distribution Coaxial Light IFVA Series

  IMAC

  Narrow-angle light distribution coaxial light that provides high illumination, high uniformity, and a compact housing.
  
  [Features]
  · Because it allows testing using specular reflection, it is effective for inspecting for fine scratches on surfaces or inspections of printing and lettering.
  · Brightness is at least 3 times that of the IFV series.
  · The uniformity of the light emitting surface has been improved, enabling uniform lighting even of glossy workpieces that reflect light.
  · Despite its compact housing, the aperture on the camera side has been widened as much as possible to ensure a wide field of view.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,075.80-
  Days to Ship:	8 Day(s) or more

• 

  Low Angle Ring Light (Direct Light) IDR-LA Series

  IMAC

  General purpose ring lighting ideal for scratch inspection/edge detection by illuminating from a low angle.
  [Features]
  · Mounted on direct ring lighting at an angle.
  · Ideal for edge detection and scratch inspection with oblique irradiation.
  · The lineup contains various sizes, from standard outer diameters of 40 mm / internal diameter 15 mm to external diameter 200 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and scratches or dirt.
  · Useful for reading engraved text on metal surfaces or substrate and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 326.61-
  Days to Ship:	8 Day(s) or more

• 

  Coaxial Spot Lighting for Telecentric IV/IHV Series

  IMAC

  Coaxial spotlight.
  Insert into a telecentric lens to be used for coaxial epi-illumination. Ideal for positioning (alignment) in the LCD, semiconductor, and electronic component fields, etc. Various products are available from compact shapes (IV) to high brightness (IHVE).

  CAD ：

  2D / 3D

  Standard Price:	SGD 370.55-
  Days to Ship:	8 Day(s) or more

• 

  Flat Direct Ring Lighting (Direct Light) IDR-F Series

  IMAC

  Lightweight flat-ring lighting that has shell type LEDs mounted horizontally to provide illumination over a wide range.
  [Features]
  · The flat illuminating surface enables illumination over a wide area.
  · Uses a POM case, with a ring with an O.D. of 90 mm and a weight of 85 g. Features a lightweight design that makes it ideal for being moved around as well.
  · Ultra-slim light is also available for dedicated use with the 16 mm diameter telecentric lens (LWD 40, 65).
  · Usable with auxiliary light of a coaxial spotlight source.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for positioning, visual inspection, and character recognition when mounted on the end of robot arms.
  · Convenient for two-dimensional code reading, mounting substrate parts inspection, and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 370.66-
  Days to Ship:	8 Day(s) or more

• 

  Chip LED Surface Illumination (Surface Emitting) IDHM Series

  IMAC

  Surface lighting with densely arranged chip LEDs.
  Backlight illumination achieves vivid silhouette images. Lineup in multiples of □30 mm. Can be selected to fit the image range.

  CAD ：

  2D / 3D

  Standard Price:	SGD 194.60-
  Days to Ship:	8 Day(s) or more

• 

  Coaxial Vertical Pseudo Lighting IFV Series

  IMAC

  Pseudo coaxial epi-illumination from the same optical axis as the camera axis, using a half mirror.
  [Features]
  · It enables inspection with specular reflection, making it effective for inspection of fine surface scratches and print/character inspection.
  · Available in 6 opening sizes from 13 mm to 100 mm.
  · BS (Beam Splitter) types help suppress ghost images.
  · Since the C01 type allows camera mounting in the horizontal direction, it can be selected according to the equipment space.
  · Light color can be selected from white / red / blue / green.
  [Applications]
  · Optimal for inspections of substrate patterns, sheet letters, gloss surface scratches, and characters.
  · Convenient for the pitch measurement of connector pins.

  CAD ：

  2D / 3D

  Standard Price:	SGD 678.92-
  Days to Ship:	13 Day(s) or more

• 

  Square Lens Lighting IFHA Series

  IMAC

  Lightweight lens lighting with low profile of 8 mm.
  [Features]
  ・ Since there is no camera window, there is no light leakage and it is possible to evenly illuminate the entire glossy workpiece
  ・ Sharpness is greatly improved by the special optical design. Printed characters such as barcodes can be captured clearly
  ・ It can be installed in a space smaller than the housing size of only 8 mm
  ・ With a rich lineup of light emitting surfaces of 50 × 50 to 200 × 200 mm, the ideal shape can be selected.
  ・ The brightness is 6 times higher than before, so it can be used with high-speed shutters

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,678.44-
  Days to Ship:	16 Day(s) or more

• 

  Mini Spot Lighting IHVA-SP Series

  IMAC

  Spot lighting that combines high-output power LED with special lens.
  It is small and lightweight, allowing installation in various environments such as inside equipment, at the tip of a robot arm, or for epi-illumination of a stereomicroscope.
  Lineup includes short-distance wide-range, wide-angle light distribution type (S) and long-distance high-output irradiation narrow light distribution type (L).
  

  Standard Price:	SGD 370.79
  Days to Ship:	13 Day(s) or more

• 

  High Luminance B'C Line Lighting (2 Row Specification, Direct Light, Wide Angle/Narrow Angle) IDBA-LEH2 Series

  IMAC

  Direct-type bar lighting optimal for large workpieces and long distances.
  [Features]
  · 3 to 4 times brighter than IDBA-LE series. Light color can be selected from white / red / blue.
  · Narrow angle lighting type (L) that is optimal for long-distance lighting (WD 200 to 5,000 mm).
  · Wide angle lighting type (S) that is optimal for short-distance lighting (WD 80 to 200 mm).
  · Optimal for environments where lighting cannot be installed nearby and for applications for uniform irradiation within large trays.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,800 mm are supported.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces (cardboard).
  · Convenient for use as an auxiliary light source in inspection equipment for applications that require a high speed shutter, such as transporting workpieces.

  CAD ：

  2D

  Standard Price:	SGD 797.72-
  Days to Ship:	18 Day(s) or more

• 

  B'C Linear Light (Direct Light / Wide-Angle / Narrow-Angle) IDBA-LE Series

  IMAC

  Bar lighting optimal for large workpieces and long distances.
  [Features]
  · One-row specification equipped with high-output power LED.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,200 mm are supported.
  · Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces, etc.
  · Ideal as an auxiliary light source for inspection devices, or as a visual inspection light for tabletop use.
  · Convenient for the external inspection of metal plates and acrylics, etc.

  CAD ：

  2D

  Standard Price:	SGD 444.69-
  Days to Ship:	8 Day(s) or more

• 

  B'C Linear Light (Direct Light / Wide-Angle) IDBA-SE Series

  IMAC

  25 mm width / 25 mm height compact near-distance wide range lighting bar.
  [Features]
  · Equipped with high-output power LEDs to illuminate brightly at short range.
  · Equivalent optical design to S type IDBA-LE units for a compact design with a width of 25 mm / height of 25 mm.
  · 50 mm (12 V specification)/100 mm (24 V specification) increments up to 800 mm are supported.
  · Light color can be selected from white / red / blue.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces, etc.
  · Ideal as an auxiliary light source for inspection devices, or as a visual inspection light for tabletop use.

  CAD ：

  2D

  Standard Price:	SGD 385.57-
  Days to Ship:	18 Day(s) or more

• 

  Large Area Lighting RiaLux (Area Lighting: 400 Size or Less) IFPA Series

  IMAC

  Large and uniform surface illumination.
  Lineup in multiples of □100 mm. Ideal for inspecting appearance or foreign objects on large workpieces such as plastic bottles. The special structure naturally cools the air without air conditioning or a fan.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,753.41
  Days to Ship:	13 Day(s) or more

• 

  Square Surface Lighting (Indirect Light) IPQC Series

  IMAC

  Indirect lighting fixture with a low angle that illuminates from 4 directions.
  Uses high-power LEDs for at least 10 times as much light as conventional products. Ideal for engraving/edge extraction of square workpieces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,163.02-
  Days to Ship:	8 Day(s) or more

• 

  UV Illumination UV-CAN Series

  IMAC

  405 nm, 375 nm, 365 nm ultraviolet lighting.
  Enables inspections clearer than those using visible light. Output 2 times that of the conventional model.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,295.02-
  Days to Ship:	18 Day(s) or more

• 

  Infrared Lighting Infrared Series

  IMAC

  Infrared light ideal for transmission type inspection of packages, liquids, printing, etc.
  [Features]
  · Adopts a wavelength peak of 850 nm, 950 nm, 1,200 nm or 1,450 nm.
  · Can be used for inspections that cannot be performed using visible light.
  · High transmittance infrared light is optimal for inspections where liquid is permeated or printed patterns are erased.
  [Applications]
  · Ideal for detecting foreign objects in liquid.
  · Convenient for visual inspection and character recognition after erasing patterns from the work surface.
  · Ideal for non-contact spectroscopic analysis and sugar concentration measurement, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 561.44-
  Days to Ship:	18 Day(s) or more

• 

  Shadowless Ring Illumination (Indirect Light) IFR Series

  IMAC

  Diffusion-type ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate for indirect lighting where direct LED light is not visible.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Character recognition, 2D code reading.
  · For mounting substrate parts inspection.
  · Character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,001.98-
  Days to Ship:	18 Day(s) or more

• 

  Shadowless Low-Angle Ring Illumination (Indirect Light) IPR Series

  IMAC

  Diffusion-type low angle ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate to keep direct LED light from being visible.
  · Uniformly irradiates glossy and uneven workpieces.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Ideal for edge chipping / crack inspection of spouts, etc., character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,777.43
  Days to Ship:	18 Day(s) or more

• 

  600,000 lx Brimax Line Lighting II IDBB-LSRA Series

  IMAC

  Easy to install according to the operating environment.
  [Features]
  ・ Special optical design.
  ・ Natural air-cooled type.
  ・ Uses power LED.

  Standard Price:	SGD 1,921.45-
  Days to Ship:	21 Day(s) or more

Loading...