Micro Grinders (Electric)

• 

  EMAX Evolution Torque Set

  NAKANISHI

  [Features]
  · Power type with higher torque than the standard type.
  · Rotational speed can be adjusted with "Digital Display".
  · Auto cruise control function equipped (sets a constant speed when the operator uses the pedal controller).
  · Equipped with brush-less motor, with no need to replace a carbon brush (maintenance-free).

  Standard Price:	SGD 1,795.50
  Days to Ship:	4 Day(s) or more

• 

  Ring type attachment collet for micro grinder

  NAKANISHI

  [Features]
  · The feel of the grip is designed for easy holding.
  · Ring type chucking allows easy and secure one-touch replacement.
  · Supports a wide range of machining situations from roughing to precision and fine finishing.

  Standard Price:	SGD 74.95-
  Days to Ship:	4 Day(s) or more

• 

  Emax Evolution Control Unit

  NAKANISHI

  [Features]
  · A large diameter knob for easy rotational speed adjustment and a LOAD meter to display load conditions and rotational speed digitally are integrated to improve work efficiency.
  · Frequently used rotational speeds can be saved to memory in advance.

  Standard Price:	SGD 640.25
  Days to Ship:	8 Day(s)

• 

  Ultra Precision Brushless Microgrinder Espart 500

  NAKANISHI

  [Features]
  · Microcomputer control provides optimal control of the motor.
  · Equipped with an error code display function. 2-digit digital display of rotational speed.
  · With on-hand switch.

  Standard Price:	SGD 2,241.77
  Days to Ship:	4 Day(s) or more

• 

  Mini Belt Sander

  MINITOR

  [Features]
  · A handy-type belt sander that exhibits full power for deburring, grinding, and polishing.

  Standard Price:	SGD 1,310.40
  Days to Ship:	8 Day(s)

• 

  High Speed Rotary Tool 4000

  DREMEL

  [Features]
  · Carbon brush cap: Allows carbon brushes to be replaced easily just by removing the cap.
  · Maintenance for long-term use can be done easily.
  · Independent ON/OFF switch: Can be operated separately from speed adjustment dial.
  · Shaft lock button: Accessories can be replaced quickly and easily.
  · Soft rubber grip: Can be held like a pen for use and fits perfectly in the hand.
  · Soft rubber grip: Hold the rear of the body when cutting, grinding, or polishing, for a perfect fit with the ring finger and pinky.

  Standard Price:	SGD 315.10
  Days to Ship:	7 Day(s)

• 

  Erector E-max Standard Motor

  NAKANISHI

  Nakanishi, micro grinder (electric) Electer E-max, standard motor.

  Standard Price:	SGD 655.78
  Days to Ship:	7 Day(s) or more

• 

  Espert 500 Controller

  NAKANISHI

  [Features]
  · The built-in microcomputer provides optimal control, allowing for smoother, more precise cutting and polishing.
  · While working with the foot pedal, the auto cruise function can be set to a constant rotation speed.
  · Whichever is pressed first among the switch on the front of the controller, the hand switch and the foot pedal has priority, so the trouble of switching has been eliminated.
  · Equipped with FiXpeed, which can preset rotation speeds in advance.
  · Carrying handle makes it convenient to carry, giving it superior mobility and making it ideal for machining on-site.
  · The electronic circuit is an eco-design that minimizes power consumption, reducing power loss and eliminating the fan for heat dissipation.
  · Equipped with a function to display error codes.
  

  Standard Price:	SGD 989.98
  Days to Ship:	14 Day(s) or more

• 

  Mini-Pen

  NIHONNSEIMITU

  [Features]
  · The cheapest model in this class with these functions and performance.
  · Simply rotate the set ring to remove and attach tip tool, one-touch operation.
  · It has a small, lightweight, compact body with a high torque of 0.0264 N∙m (270 g∙cm).
  · The rotation speed can be changed over a range of 4,000 to 35,000 min-¹.
  · Forward/reverse rotation is possible.
  · Features a built-in circuit breaker preventing motor burn.
  · Foot switch (option) can be used

  Standard Price:	SGD 740.30
  Days to Ship:	4 Day(s) or more

• 

  Collet Holder

  NAKANISHI

  [Features]
  High-quality luster can be achieved.
  The attachment and detachment method is a hook-and-loop tape type.
  1 pc. included.
  [Applications]
  For polishing, etc.

  Standard Price:	SGD 264.76
  Days to Ship:	8 Day(s)

• 

  Deceleration Device For Emax EVOlution

  NAKANISHI

  [Features]
  · Connects between an attachment and motor.
  [Applications]
  · For low-speed high-torque polishing and drilling.
  

  Standard Price:	SGD 471.25
  Days to Ship:	7 Day(s) or more

• 

  Ultraprecision Brushless Micro Grinder Expert 500 Compact Motor

  NAKANISHI

  Microcomputer control provides optimal control of the motor. Equipped with an ON/OFF switch function.

  Standard Price:	SGD 805.81
  Days to Ship:	8 Day(s)

• 

  Mini Router, Special Misumi Set B

  HOZAN

  A micro grinder (electric) capable of various types of processing by changing bits to match the work performed.
  [Features]
  · A MISUMI original set of main body and all types of bits (1 each of 6 types).
  · Can be used quicker and with less power. Recommended even for those who do not prefer high-speed rotation.
  · Revolution can be continuously adjusted between 7,000 and 16,500 rpm to suit the bit type or work type.
  · A collet chuck type with high fastening force and less runout.
  · No need to use a tool for attachment and detachment, providing good working efficiency.
  · The chuck can be opened with a 10 mm wrench. Supports bit shafts of φ2.35 (diameter 2.35 mm).
  [Applications]
  · In addition to pattern cutting of circuit boards and resist film removal, it is also convenient for grinding glass, stone materials and ceramics.

  Standard Price:	SGD 219.22
  Days to Ship:	4 Day(s) or more

• 

  Micro Grinder Standard Rotary, Middle Speed Type

  MINITOR

  [Features]
  ·A standard type that can be used in a wide range of applications, from deburring to mirror polishing.
  ·You can choose from nine models with different rotation speeds and torques.

  Standard Price:	SGD 855.96-
  Days to Ship:	8 Day(s) or more

• 

  Collet Chuck CHH Group

  NAKANISHI

  Nakanishi Micro Grinder (Electric) Collet Chuck CHH Group.

  Standard Price:	SGD 72.98-
  Days to Ship:	11 Day(s) or more

• 

  Ultrasonic Polishing Equipment LS-45

  NIHONNSEIMITU

  [Features]
  ・ Polishing finish of various molds such as plastic, die-cast press, rust, glass, etc.
  ・ Polishing of non-steel metals, ceramics, carbide, precious metals and deburring of metals
  ・ Peeling and cutting of films (resist, etc.) such as PCB and copper foil

  Standard Price:	SGD 2,864.30
  Days to Ship:	9 Day(s) or more

• 

  Collet Chuck

  ARGOFILE

  Collet Chuck for 2.35 mm / 3 mm / 3.15 mm Tip Tools

  Standard Price:	SGD 77.49
  Days to Ship:	8 Day(s) or more

• 

  Emax Evolution Standard Motor

  NAKANISHI

  [Features]
  · Superior total balance of rotational speed, weight, motor diameter, torque, etc.
  · A lightweight and compact general-purpose type ideal for precision detailed machining.
  · The high-performance brushless motor makes it unnecessary to replace the carbon brush.
  · Stable and persistent cutting and grinding is possible with little change in the rotation speed even when the load changes.
  · It is extremely quiet from low-speed to high-speed rotation, and allows smooth and flexible variable speed as desired.

  Standard Price:	SGD 723.77
  Days to Ship:	4 Day(s) or more

• 

  Mini Router

  HOZAN

  A micro grinder (electric motor) that adopts a collet chuck method with high fastening force and less runout.
  [Features]
  · Can be used quicker and with less power. Recommended even for those who do not prefer high-speed rotation.
  · Revolution can be continuously adjusted between 7,000 and 16,500 rpm to suit the bit type or work type.
  · No need to use a tool for attachment and detachment, providing good working efficiency. Brush for sweeping chips is also included.
  · The chuck can be opened with a 10 mm wrench. Supports bit shafts of φ2.35 (diameter 2.35 mm).
  · The included diamond bit is ideal for pattern cutting of substrates and grinding glass, stone and ceramics.
  · Comes with a special case that can store all mini routers and various bits, and can be stored in a compact manner.
  [Applications]
  · Can be used for a wide range of application such as cutting circuit board patterns and resist film removal.

  Standard Price:	SGD 164.34
  Days to Ship:	Same day

• 

  Micro Grinder Standard Rotary, Ultra High Speed Type

  MINITOR

  [Features]
  · Standard type which can be used for a wide range of applications from deburring to mirror polishing.
  · Can be selected from 9 models with different rotational speed and torque.

  Standard Price:	SGD 1,057.90
  Days to Ship:	8 Day(s)

• 

  Swing Action File Liberon

  MINITOR

  [Features]
  ·The horizontal movement is effective for polishing grooves and narrow areas.
  Overall length (mm): 187
  Outer diameter (mm): 32

  Standard Price:	SGD 1,390.61
  Days to Ship:	8 Day(s)

• 

  D.C. Power Pack (2 Station Type)

  MINITOR

  [Features]
  ・ High-performance power pack equipped with new functions that maximize the capabilities of the handpiece
  ・ Just by inserting the Ver.2 handpiece, it identifies the type, displays speed, and controls optimal torque
  ・ It is compatible with the previous MINIMO motor series without identification function, and in addition to a more powerful usability than the conventional power pack, the output level is digitally displayed with %

  Standard Price:	SGD 966.10
  Days to Ship:	8 Day(s)

• 

  Various Types Of Brush Nylon Brush With Diamond Abrasive Grains Wire Diameter (0.2 to 0.5 mm)

  NAKANISHI

  [Features]
  · Chemical fiber brush with superior flexibility, elasticity and abrasion resistance. More uniform than animal fiber, it has no wettability and does not extract impurities.
  · Durable against alkalis and common solvents (alcohol, benzene, toluene, machine oil, etc.)
  · Melting point is 120°C (420°C), but the continuous service temperature limit is 100°C (210°C). Temperature in brackets is for heat-resistant brushes.

  Standard Price:	SGD 29.90-
  Days to Ship:	8 Day(s) or more

• 

  Lever Type Attachment IH-300

  NAKANISHI

  [Features]
  · Provides high precision and high reliability by combining micron technologies.
  · Slim and lightweight, making it ideal for fine finish processing.
  · Lever-type chucking allows for secure single-action tool exchange.
  

  Standard Price:	SGD 337.17
  Days to Ship:	7 Day(s) or more

• 

  Foot Pedal For Sheenus Neo

  NAKANISHI

  [Applications]
  Dedicated ON-OFF foot pedal that can be used for ultrasonic polishing equipment.

  Standard Price:	SGD 118.80
  Days to Ship:	66 Day(s) or more

• 

  Gold II

  NIHONNSEIMITU

  [Features]
  · Generates high torque of 0.0333 N·m (270 g·cm) with a compact body.
  · One touch attachment/detachment function: Tip tool can be attached/detached just by turning the set ring.

  Standard Price:	SGD 831.06
  Days to Ship:	4 Day(s) or more

• 

  Mini-Pen Power Unit

  NIHONNSEIMITU

  [Features]
  · The rotation speed can be changed over a range of 4,000 to 35,000 min-¹.
  · Forward/reverse rotation is possible.
  · Features a built-in circuit breaker preventing motor burn.
  · Foot switch (option) can be used

  Standard Price:	SGD 284.52
  Days to Ship:	4 Day(s) or more

• 

  Mini-Pen Motor Unit

  NIHONNSEIMITU

  [Features]
  · Collet chuck type.
  · 4,000 – 35,000 min-¹.
  · Stepless speed change

  Standard Price:	SGD 547.50
  Days to Ship:	8 Day(s)

• 

  Battery Type Micro Grinder (shaft diameter 2.34 mm)

  URAWA

  [Features]
  · Easy to use cordless battery type.
  · With diamond bar enabling immediate use.
  · Since it is powerful despite its small size, it is ideal for removing burrs or marks.
  · Can be used without taking up much space.
  · For light work for hobbies (cutting and drilling work of plastic, resin, etc).

  • Volume Discount

  Standard Price:	SGD 33.40
  Days to Ship:	4 Day(s) or more

• 

  electric grinder rotary (Integrated type)

  URAWA

  [Features]
  · Tapered tip for realizing both ease of handling and ease of use.
  · Realized machining that requires precision and accuracy.
  · Tip tool replacement is a patented one-touch mechanism.
  · Ergonomically designed and equipped with self cooling fan on motor rotor.

  • Volume Discount

  Standard Price:	SGD 602.45
  Days to Ship:	4 Day(s) or more

• 

  Electric Grinder Set / Single Unit Controller / Single Unit Hand Piece

  URAWA

  [Features]
  · It has a simple design that prioritizes how easy it is to use.
  · Continuous use possible from low-speed to high-speed rotation.

  • Volume Discount

  Standard Price:	SGD 665.15
  Days to Ship:	4 Day(s) or more

• 

  Maxima 80 Torque Handpieces

  ARGOFILE

  High Torque Type Brush Hand Piece at Max 35,000 min⁻¹ Using Powerful Nd Magnet

  Standard Price:	SGD 430.30
  Days to Ship:	8 Day(s) or more

• 

  POLYTOR Ultrasonic Polishing Handpiece

  MINITOR

  [Features]
  · For a wide range of uses, from removing hardened surfaces after discharge processing to mirror finishing.
  · At 25,000 vibrations per second, it is effective for precision finishing.

  Standard Price:	SGD 3,173.88
  Days to Ship:	8 Day(s)

• 

  90° Equal Angle Steel Attachment IC-300

  NAKANISHI

  [Features]
  · A polishing disc pad ideal for flat surface speed polishing.
  · Capable of extensive machining from roughing to mirror finishing.

  Standard Price:	SGD 529.95
  Days to Ship:	4 Day(s) or more

• 

  50° Equal Angle Steel Attachment KC-300

  NAKANISHI

  [Features]
  · Convenient for machining bottom corners using a shafted tool.
  · Achieves 3/4 deceleration with built-in gear. Rotates in the opposite direction of the motor rotation.

  Standard Price:	SGD 525.80
  Days to Ship:	4 Day(s) or more

• 

  Fine Belt Sander, Attachment, KBS-101

  NAKANISHI

  [Features]
  · Belt angle can be freely adjusted and belts can be replaced with one touch.
  · The belt travel speed is steplessly variable.

  Standard Price:	SGD 675.42
  Days to Ship:	4 Day(s) or more

• 

  Raster Attachment

  NAKANISHI

  [Features]
  · Its high power and large stroke make highly efficient machining possible.
  · Rubber grip is easy to hold and reduces vibration.
  · Can be used for work from various filing to lapping mirror finishing.

  Standard Price:	SGD 1,147.51
  Days to Ship:	4 Day(s) or more

• 

  Carbide Point

  DREMEL

  Letter engraving accessory exclusively for engravers. Can be used to engrave pictures and letters on metal, glass, wood, plastic, leather, etc.

  Standard Price:	SGD 8.78
  Days to Ship:	3 Day(s) or more

• 

  Precision Handpiece Grinder HP-200S

  MRMEISTER

  Hand piece grinder for precision machining with little core runout, in pursuit of rotation precision. Collets can be switched out in a single touch, making it easy to exchange tip tools with 2.35 mm shafts and 3.0 mm shafts. The controller maximum rotation speed is up to 35,000 rpm, and it is also equipped with a forward and reverse function.

  Standard Price:	SGD 620.11
  Days to Ship:	4 Day(s) or more

• 

  Micro Finisher UL-40W

  SOWA KASEI

  Ultrasonic polishing and micro motor system double controller. Max 45 W, 24,000 vibrations per minute, with a powerful output of 45 μm amplitude over 10 steps, making it possible to adjust to the ideal output.

  Standard Price:	SGD 1,578.31
  Days to Ship:	42 Day(s) or more

• 

  Power Unit

  NIHONNSEIMITU

  A compact, lightweight, high-performance, high-end power unit developed ahead of the future. Compact size that emphasizes beautiful design and functionality.
  [Features]
  ・ Equipped with high-performance microcontroller
  ・ 2 station method
  ・ Equipped with feedback function
  ・ With soft start and quick stop functions
  ・ Forward/reverse rotation selection and digital rotational speed display
  ・ LOAD meter installed
  ・ Self-diagnosis function
  ・ Error code display
  ・ Foot controller connectable

  Standard Price:	SGD 599.04
  Days to Ship:	4 Day(s) or more

• 

  Tip Tool for K-109

  HOZAN

  Parts for the high-speed model micro grinder (electric motor) with a maximum speed of 16,500 rpm.
  [Features]
  · For K-109.
  [Applications]
  · Ideal for cutting circuit board patterns and resist film removal.
  · For bit replacement, and also convenient for drilling, deburring, cutting, and rust removal.

  Standard Price:	SGD 7.97-
  Days to Ship:	Same day or more

• 

  Mini Router, Special Misumi Set A

  HOZAN

  A micro grinder (electric) capable of various types of processing by changing bits to match the work performed.
  [Features]
  · A MISUMI original set of main body and all types of bits (1 each of 19 types).
  · Can be used quicker and with less power. Recommended even for those who do not prefer high-speed rotation.
  · Revolution can be continuously adjusted between 7,000 and 16,500 rpm to suit the bit type or work type.
  · A collet chuck type with high fastening force and less runout.
  · No need to use a tool for attachment and detachment, providing good working efficiency.
  · The chuck can be opened with a 10 mm wrench. Supports bit shafts of φ2.35 (diameter 2.35 mm).
  [Applications]
  · In addition to pattern cutting of circuit boards and resist film removal, it is also convenient for grinding glass, stone materials and ceramics.

  Standard Price:	SGD 340.87
  Days to Ship:	4 Day(s) or more

• 

  Foot Switch for Electronic Grinder (With Quick Stop Circuit)

  URAWA

  [Features]
  · ON/OFF operation is simple.
  · Features a built-in "quick stop" circuit for stopping the motor immediately when it is turned OFF.

  • Volume Discount

  Standard Price:	SGD 57.42
  Days to Ship:	4 Day(s) or more

• 

  Foot Switch for Electronic Grinder (Speed Adjustable)

  URAWA

  [Features]
  · Motor speed can be adjusted from the start to the maximum speed as with a car's accelerator pedal.

  • Volume Discount

  Standard Price:	SGD 102.26
  Days to Ship:	4 Day(s) or more

Loading...