(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Dial Gauges(Application:Lever Type (Indicator))

Dial gauges are measuring instruments that can accurately measure minute lengths and displacements. Unlike other measuring instruments that directly measure numerical values, they are used for measuring the difference compared to a reference or correcting parallelism. Dial gauges are available in various types, including a standard type and lever type. The standard type uses gears and a lever to convert the linear motion of a spindle into rotational motion, mechanically expand this motion and indicate the displacement with a scale. They are suited to observing significant changes. The lever-type uses sector gears and crown gears to expand the motion. While the lever-type has a higher resolution than the standard type, the variation is converted into the rotational motion of the lever, so a big change may be indicated with a smaller figure than the actual number. A single reading of a standard-type dial gauge is 0.01 mm, but there are also special dial gauges with a single reading of 0.001 mm. In addition to an analog type where measurements are read on a scale, a digital type is available as well.
Days to Ship
  • All
  • Same day
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Scale interval minimal display(mm)
Display Method
Maximum Measurement Length (Range Selection)(mm)
Waterproof Function
Output terminal for measuring data: with or without
Scale type
Calibration Certificate

    Dial Gauge, New Pic-test (No Clutch Type, PCN Type)

      Dial Gauge, Pictest (Switch Lever Type, PC Series)

        Lever Type Dial Gauge

          New Pic-Test (without Stem, V-Series)

            New Pic Test for Low Pressure (E Series)

              Dial test indicator

                Lever Test (Lever Swap Type)

                  Dial Indicator, Measurement Range 0 to 0.2 mm

                    Dial Indicator, Measurement Range 0 to 0.8 mm

                      Lever Test (Auto Clutch)

                        Dial Indicator Measurement Range 0 to 0.2 mm Probe Ruby

                          Surface Dial, New Peak Test (D Series)

                            Pic Test for Low Pressure (E Series)

                              Non-Magnetic/Non-Energization New Pic-Test (U Series)

                                Pictest (Double Sided Type, W Series)

                                  Pictest (without Stem, V Series)

                                    0-0 PIC-Test (PCC Series)

                                      Pointer Less than One Rotation New Pick Test (Z Series)

                                        Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe

                                          Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe

                                            Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe

                                              Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)

                                                Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe

                                                Brand

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                MAHR

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                SHINWASOKUTEI

                                                TECLOCK

                                                NIIGATA SEIKI (SK)

                                                NIIGATA SEIKI (SK)

                                                TECLOCK

                                                NIIGATA SEIKI (SK)

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                OZAKI MFG (PEACOCK)

                                                NIIGATA SEIKI (SK)

                                                NIIGATA SEIKI (SK)

                                                NIIGATA SEIKI (SK)

                                                NIIGATA SEIKI (SK)

                                                NIIGATA SEIKI (SK)

                                                Product Series

                                                Dial Gauge, New Pic-test (No Clutch Type, PCN Type)

                                                Dial Gauge, Pictest (Switch Lever Type, PC Series)

                                                Lever Type Dial Gauge

                                                New Pic-Test (without Stem, V-Series)

                                                New Pic Test for Low Pressure (E Series)

                                                Dial test indicator

                                                Lever Test (Lever Swap Type)

                                                Dial Indicator, Measurement Range 0 to 0.2 mm

                                                Dial Indicator, Measurement Range 0 to 0.8 mm

                                                Lever Test (Auto Clutch)

                                                Dial Indicator Measurement Range 0 to 0.2 mm Probe Ruby

                                                Surface Dial, New Peak Test (D Series)

                                                Pic Test for Low Pressure (E Series)

                                                Non-Magnetic/Non-Energization New Pic-Test (U Series)

                                                Pictest (Double Sided Type, W Series)

                                                Pictest (without Stem, V Series)

                                                0-0 PIC-Test (PCC Series)

                                                Pointer Less than One Rotation New Pick Test (Z Series)

                                                Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe

                                                Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe

                                                Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe

                                                Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)

                                                Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe

                                                Days to Ship 4 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 4 Day(s) or more 7 Day(s) 8 Day(s) 11 Day(s) 11 Day(s) 8 Day(s) 11 Day(s) 6 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) or more 6 Day(s) or more 10 Day(s) or more 4 Day(s) or more 7 Day(s) or more 10 Day(s) 10 Day(s) 7 Day(s) or more 10 Day(s)
                                                ApplicationLever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)Lever Type (Indicator)
                                                Scale interval minimal display(mm)0.001 ~ 0.010.002 ~ 0.010.002 ~ 0.010.001 ~ 0.010.002 ~ 0.010.010.002 ~ 0.010.0020.010.001 ~ 0.010.0020.001 ~ 0.010.010.001 ~ 0.010.010.002 ~ 0.01-0.002 ~ 0.010.010.0020.0020.010.01
                                                Display MethodDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDialDial
                                                Maximum Measurement Length (Range Selection)(mm)0–1 ~ 1.1 to 50–10–10–10–10–10–10–10–10–10–10–10–10–10–10–1-0–10–10–10–10–10–1
                                                Waterproof FunctionAvailableAvailable-Available-NA---------Available--NANANANANA
                                                Output terminal for measuring data: with or without-----NA-NANA-NA-------NANANANANA
                                                Scale typeBalance ScaleBalance ScaleBalance ScaleBalance ScaleBalance ScaleBalance ScaleBalance Scale--Balance Scale-Balance ScaleBalance ScaleBalance ScaleBalance ScaleBalance ScaleContinuous ScaleBalance ScaleBalance ScaleBalance ScaleBalance ScaleBalance ScaleBalance Scale
                                                Calibration Certificate------------------NoNoNoNoNo

                                                Loading...

                                                1. 1

                                                Related Categories to Dial Gauges