Vernier Calipers

• 

  Digital Calipers DT Type

  NIIGATA SEIKI (SK)

  Digital calipers for measuring outer diameter, inner diameter, and level difference that can also be used for measuring depth thanks to use of a depth bar.
  [Features]
  · Standard type digital vernier calipers.
  · The digital display is easy to see.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Can be used for measuring outer diameter, inner diameter, level difference and depth.

  Days to Ship:	3 Day(s) or more

• 

  Wire Rope Diameter Measurement Calipers

  NIIGATA SEIKI (SK)

  Calipers ideal for wire rope diameter measurement.
  [Features]
  · Stable diameter measurements of wire ropes can be performed with φ20 (diameter 20 mm) disc type probe.
  · Features a hold function.
  · Equipped with auto off function (after about 20 minutes).
  · Stainless steel.
  [Applications]
  · Used for actual diameter measurement of wire ropes.

  Days to Ship:	3 Day(s) or more

• 

  Digital Long Jaw Calipers

  NIIGATA SEIKI (SK)

  Calipers that are perfect for measuring the diameter of large workpieces.
  [Features]
  · The digital display is easy to see.
  · Suitable for measuring locations with depth and large diameters.
  · With preset function.
  · With fine feed function.
  [Applications]
  · Used for measuring outside, inside, and level difference.
  · Ideal for diameter measurement of large workpieces, such as cans.

  Days to Ship:	3 Day(s) or more

• 

  Digital calipers

  SK 11

  Digital type allows easy measurement of outer diameter, inner diameter, level difference and depth, etc.
  [Features]
  · Measurement values are instantly displayed on the digital display.
  · With zero setting function to enable relative measurements and indirect measurements.
  · With a hold function that can set and hold a read value.
  [Applications]
  · Measuring outer diameter, inner diameter, level difference and depth, etc.

  Days to Ship:	3 Day(s) or more

• 

  [Kanon] Vernier Caliper for Inside Measurement E-ICM

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  Days to Ship:	3 Day(s) or more

• 

  Caliper Attachment

  NIIGATA SEIKI (SK)

  Caliper attachment for enabling point measurements in tight spaces just by mounting to calipers
  [Features]
  · Attach to the outer jaws of calipers to enable use as point type calipers.
  · Ball probe on one side and pin type probe on the other. Ideal for measuring the thickness of pipes with a shape in which grooves have been cut into the exterior.
  [Applications]
  · Attaches to the outer jaws of calipers to enable measurement of concave surfaces.

  Days to Ship:	3 Day(s) or more

• 

  Digital Calipers

  TRUSCO NAKAYAMA

  Days to Ship:	3 Day(s) or more

• 

  Digital Long Calipers

  NIIGATA SEIKI (SK)

  Calipers with fine feed function, perfect for measuring large workpieces.
  [Features]
  · High cost performance model.
  · The digital display is easy to see.
  · With preset function.
  · Vernier is capable of fine movement feeding.
  [Applications]
  · Can be used for measuring outside, inside, and level difference.

  Days to Ship:	4 Day(s) or more

• 

  C Surface Calipers

  TOEIKOGYO

  [Features]
  · With scale lines calculated based on the Pythagorean theorem, C surface dimensions and welding dimensions can be measured accurately and quickly.
  · Vernier scale enables C-surface dimension measurements from 0.1 mm to 15 mm.
  [Applications]
  · Milling, Weld Beveling, Lathe Machining, Scribing
  [Material]
  · Main unit: SPHC-P, phosphate galvanizing treatment
  · Main Scale: SUS420J2, Silver Plating

  Days to Ship:	3 Day(s) or more

• 

  [Kanon] Flat Head Caliper E-PITA

  NAKAMURASEISAKU

  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Days to Ship:	7 Day(s) or more

• 

  Plastic digital calipers

  A&D

  Lightweight, easy-to-use plastic vernier calipers which can be read directly after measurement.
  [Features]
  · Vernier calipers with a large digital liquid crystal display.
  · 0.01 mm display resolution.
  · Equipped with data hold function and auto power off function.
  · A plastic type to prevent scratching the measured object.
  · Lightweight, safe, and easy to carry.
  [Applications]
  · For inspection work, design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.

  Days to Ship:	3 Day(s) or more

• 

  LR Vernier Caliper

  NIIGATA SEIKI (SK)

  Forward/backward Vernier scales improve performance with the 2 prong approach, as they enable measurements to be made with both left and right hands.
  [Features]
  · Upper/lower 2-tier type Vernier scale.
  · Supports both right and left hands, and measurement can be performed with either hand.
  · Forward/backward Vernier scales improve performance with the 2 prong approach.
  · Silver finish.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Days to Ship:	3 Day(s) or more

• 

  Digital Inside Calipers

  NIIGATA SEIKI (SK)

  Calipers convenient for internal point measurements of special shapes.
  [Features]
  · Digital type convenient for internal point measurements of special shapes.
  · Dedicated calipers for internal measurements.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Internal measurement. (To achieve actual dimensions, add 22 mm for D-150I or 35 mm for D-150I2 to displayed values.)

  Days to Ship:	3 Day(s) or more

• 

  Digital Calipers with Carbide Tips

  NIIGATA SEIKI (SK)

  Calipers optimal for measurement of high-hardness, cast, and rough-machined products where abrasion is a concern.
  [Features]
  · Top selling standard digital calipers.
  · Includes a carbide tip on the exterior measurement surface.
  · The digital display is easy to see.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Measurement of outside, inside, level difference and depth.
  · Measurement of rough machined parts, cast items, grindstones, etc.

  Days to Ship:	3 Day(s) or more

• 

  Left Handed Digital Vernier Caliper

  NIIGATA SEIKI (SK)

  Digital calipers dedicated for left-handed people.
  [Features]
  · Clearly visible digital display.
  · Material: Stainless steel
  · Power supply: SR44 (silver oxide battery) x 1 included for testing.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Days to Ship:	3 Day(s) or more

• 

  Digital Calipers for Hole Pitch

  NIIGATA SEIKI (SK)

  Digital calipers capable of quick and accurate measurement of small hole diameter dimensions between cores.
  [Features]
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · It can be used for hole pitch measurement from φ1 to 5 (diameter 1 to 5 mm) (D-150A), φ1 to 10 (diameter 1 to 10 mm) (D-150A2).

  Days to Ship:	3 Day(s) or more

• 

  Long Jaw Caliper

  NIIGATA SEIKI (SK)

  Calipers capable of measuring the diameter of large workpieces, recommended for canners.
  [Features]
  · It can be used for measuring deep parts.
  · Can measure large diameters.
  · With fine feed.
  [Applications]
  · Perfect for outside, inside and step measurement of large diameter workpieces.

  Days to Ship:	3 Day(s) or more

• 

  Digital Vernier Caliper for Pipes

  NIIGATA SEIKI (SK)

  Calipers with a pin-shaped round bar jaw on one side that is ideal for measuring the thickness of pipes, bearings and ring-shaped products.
  [Features]
  · The jaw of one side is shaped like a round bar to make it possible to accurately measure pipe wall thickness.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Measuring thick products such as rings, bearings, pipe shapes, etc.

  Days to Ship:	3 Day(s) or more

• 

  Digital calipers with large text and hold function (150 mm / 200 mm / 300 mm / 450 mm / 600 mm / 1,000 mm)

  SHINWASOKUTEI

  Digital indicator calipers where there is no need to read the main scale. Equipped with a hold convenient for measuring places where the LCD unit is not visible. The minimum read value is 0.01 mm, ideal for extremely precise work.
  [Features]
  · With zero setting function to enable relative measurements and indirect measurements.
  · A hold function is useful when the display is not visible.
  · Drip-proof unit parts.
  (Can be used when wet if immediately wiped dry.)
  [Applications]
  · External measurements, internal measurements, step measurements, depth measurements

  Days to Ship:	3 Day(s) or more

• 

  Universal Design Standard Caliper

  TRUSCO NAKAYAMA

  Days to Ship:	3 Day(s) or more

• 

  Digital CR Calipers

  TOEIKOGYO

  Switching between C (chamfer) and R (rounding) measurement can be performed with button operation. 2 measurement methods, absolute measurement (ABS) and relative measurement, can be performed. 3 With master gauge for absolute value calibration (Φ20 ±3 μm) included.

  Days to Ship:	3 Day(s) or more

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Days to Ship:	3 Day(s) or more

• 

  [Kanon] Large Caliper EMA

  NAKAMURASEISAKU

  [Features]
  · A standard long digital vernier caliper.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring turned workpieces.

  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for pitch measurement of holes with different diameters.
  · Round hole pitch calipers of “offset type," with main scale probe moving vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Standard Calipers SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers
  
  [Features]
  · Standard vernier calipers for regular measurements.
  · Standard scale type calipers with "green lines" that don't tire the eyes

  Days to Ship:	3 Day(s) or more

• 

  [Kanon] Caliper for Narrow Spaces E-ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · Internal/external measurements in narrow/deep places.

  Days to Ship:	4 Day(s) or more

• 

  [Kanon] Vernier Caliper SCM

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · The jaw tip is thin, enabling measurement of narrow sections that can be read with high precision

  Days to Ship:	4 Day(s) or more

• 

  Drip-proof stainless steel digital caliper

  A&D

  Easily usable drip-proof stainless steel vernier calipers with a drip-proof structure and a large liquid crystal display.
  [Features]
  · High speed response (maximum response speed: 3 m/s).
  · Smooth and sliding, with no surface irregularities.
  · Drip-proof structure IP54 (normal operation even when wet if wiped dry).
  · Equipped with data hold function and auto power off function.
  · Comes with a thumb roller that allows fine adjustment.
  [Applications]
  · For inspection work, design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.

  Days to Ship:	3 Day(s) or more

• 

  一般ノギス（CR-NA530）

  BLUEBIRD

  [Description]
  · The most common type of calipers, a gauge that reads the scale directly and measures outer and inner diameters.

  Days to Ship:	3 Day(s) or more

• 

  Digital Blade Calipers

  NIIGATA SEIKI (SK)

  Calipers with slender 0.75 mm jaw tips that are very convenient for measuring microgrooves, etc.
  [Features]
  · A digital type featuring thinly-designed outside jaws that can be used to measure microgrooves, etc.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Ideal for measuring narrow grooves, etc.

  Days to Ship:	3 Day(s) or more

• 

  Digital Pointed Calipers

  NIIGATA SEIKI (SK)

  These calipers are useful when measuring the wire diameters of meshes or microgrooves, since the jaw tip has been formed into an acute angle.
  [Features]
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Ideal for measuring the dimensions of narrow areas.
  · Can be used for measuring outside, inside, level difference and depth, as well as measuring narrow dimensions of irregularly shaped objects.

  Days to Ship:	3 Day(s) or more

• 

  Left Handed Vernier Caliper

  NIIGATA SEIKI (SK)

  Calipers dedicated for left-handed people.
  [Features]
  · Material: Stainless steel
  · Silver finish.
  [Applications]
  · Can be used for measuring outside, inside, level difference and depth.

  Days to Ship:	3 Day(s) or more

• 

  Dial Scale Caliper DVC

  NIIGATA SEIKI (SK)

  Calipers with a Vernier scale that can be read with a dial, preventing parallax errors and misreadings.
  [Features]
  · A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.
  · Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.
  · Uses a clearly visible yellow scale plate.
  · Material: Stainless steel.
  · Silver finish.
  [Applications]
  · Outer diameter, inner diameter, level difference and depth measurements are possible.

  Days to Ship:	3 Day(s) or more

• 

  Silver Standard Calipers TVC

  NIIGATA SEIKI (SK)

  Vernier integrated type standard M calipers with an easy-to-read scale that enable measuring O.D., I.D., steps, and depth.
  [Features]
  · High cost performance model.
  · M type standard calipers.
  · Vernier integrated type with a scale that is easy to read.
  · Silver finish.
  [Applications]
  · Can be used for measuring outer diameter, inner diameter, level difference and depth (4-way).

  Days to Ship:	3 Day(s) or more

• 

  Dial Scale Calipers with Carbide Tip

  NIIGATA SEIKI (SK)

  Calipers with carbide tips (inner and outer measurement surface), ideal for measuring rough machined parts, castings, grindstones, etc.
  [Features]
  · A dial is incorporated into the calipers to enable the measured value to be read directly, without using the Vernier scale.
  · Four measurements possible with depth bar: outer diameter, inner diameter, depth, and step measurement.
  · Silver finish.
  [Applications]
  · Ideal for measuring castings, grindstones, etc.
  · Can be used for measuring outer diameter, inner diameter, level difference and depth.

  Days to Ship:	3 Day(s) or more

• 

  Digital Inside Calipers - Knife Edge Type

  NIIGATA SEIKI (SK)

  Calipers convenient for measuring inside recesses.
  [Features]
  · The jaws are long.
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Dedicated calipers for internal measurements.

  Days to Ship:	3 Day(s) or more

• 

  Digital Neck Calipers - Pointed Type

  NIIGATA SEIKI (SK)

  Digital calipers convenient for point thickness measurement of recesses, grooves, etc.
  [Features]
  · Pin-shaped gauge head. (Spherical tip)
  · With hold function.
  · With auto off function. (Approximately 20 minutes)
  [Applications]
  · Can be used to measure the outer diameter of the thickness of the concave portion, etc.

  Days to Ship:	3 Day(s) or more

• 

  Vernier caliper

  SHINWASOKUTEI

  Standard calipers.
  [Features]
  · Standard type and easy to use.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Days to Ship:	3 Day(s) or more

• 

  High Grade Mini Vernier Calipers

  SHINWASOKUTEI

  High-class, high-precision mini calipers that can be used for measuring various dimensions, small as they are.
  [Features]
  · Small, conveniently portable calipers.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Days to Ship:	3 Day(s) or more

• 

  Portable Vernier Calipers

  SHINWASOKUTEI

  Pocket calipers used for various dimensional measurements.
  [Features]
  · Small, conveniently portable calipers.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  Days to Ship:	3 Day(s) or more

• 

  Digital calipers solar panel

  SHINWASOKUTEI

  Vernier calipers which reduce battery consumption with 2-way power source type (solar panels/lithium batteries) for various dimensional measurements.
  [Features]
  · Uses stainless steel jaw.
  · Achieves high accuracy of ±0.03 mm.
  · Solar panel is activated to reduce battery consumption when ambient illumination is 200 lx or more.
  · With zero setting function to enable relative measurements and indirect measurements.
  [Applications]
  · Convenient for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.
  · The minimum read value is 0.01 mm, ideal for extremely precise work.

  Days to Ship:	4 Day(s) or more

• 

  Digital calipers with mini hold function

  SHINWASOKUTEI

  Calipers that can perform outer diameter and inner diameter measurement, depth measurement, step measurement, comparison measurement, and indirect measurement.
  [Features]
  · Digital display can be understood at a glance.
  · The minimum read value is 0.01 mm, ideal for extremely precise work.
  · With zero setting function to enable relative measurements and indirect measurements.
  · Equipped with a hold function that's useful when the display is not visible.
  · The unit features a drip-proof structure.
  [Applications]
  · Used for various dimensional measurements.

  Days to Ship:	3 Day(s) or more

Loading...