(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Thread-Cutting-Related Tools(Screw size (Nominal):M2.5)

Threading-related tools are a variety of useful tools used when setting up screws, excluding typical taps and dies. Drill tap with integrated drill and tap, and female thread is set at a time even when there is no pilot hole, enabling high-efficiency work. A tap / drill bit set with a drill bit set for pilot holes attached to the tap set. A check pin dedicated to pilot holes that can easily and accurately inspect the pilot hole diameter of the screw and reduce defects in female thread processing. The lineup includes a magnet tapper that can be fixed with a magnet and tapped vertically, and that can prevent twisting bending and breakage. There are a wide variety of specifications for screws, so select a screw standard, thread diameter, and ridge pitch according to the processing purpose.
Days to Ship
  • All
  • Same day
  • 4 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

      Union Tool Screw Cutting Tool

        Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

          Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

            Check-Pins for Bored Holes in Thread Form Tapping for R-Y Taps._CPR-Y

            Brand

            YAMAWA MFG

            UNION TOOL

            YAMAWA MFG

            YAMAWA MFG

            YAMAWA MFG

            Product Series

            Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

            Union Tool Screw Cutting Tool

            Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

            Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

            Check-Pins for Bored Holes in Thread Form Tapping for R-Y Taps._CPR-Y

            Days to Ship 7 Day(s) or more 8 Day(s) 9 Day(s) 9 Day(s) 9 Day(s)
            Screw size (Nominal)M2.5M2.5M2.5M2.5M2.5
            Screw TypesMeter-MeterMeterMeter
            work material-----
            Pitch (P), Number of Threading(mm)0.35 ~ 0.450.450.450.45-
            Tool Material TypeHigh-speed steel-High-speed steelHigh-speed steel-
            Tap TypeThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related tool
            Hole typeFor through hole / For blind hole-For blind holeFor through hole / For blind hole-
            Chamfer threads (Lcf)-----
            Coating Type-OtherNon-CoatedNon-Coated-
            Coating Y/NNAAvailableNANA-
            Overall Length (L)(mm)455041.5-44

            Loading...

            1. 1

            Related Categories to Thread-Cutting-Related Tools