(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Thread Cutters(Hole type:For blind hole)

A thread mill is a cutter that uses an NC milling machine or machining center to machine internal threads. It processes internal threads by performing helical interpolation upon a pilot hole. Milling makes high-accuracy machining possible. In addition, since there is little cutting resistance, there are few problems with breaking, and even if breakage occurs, extraction can be performed easily. Many thread mills are made of carbide, and some coated thread mills are compatible with high-hardness steel, which is difficult to tap. With the same thread pitch, various thread diameters can be machined by changing the program. There are also mills that can perform pilot hole drilling and thread cutting with a single thread mill.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Coating Type
Coating Y/N
Overall Length (L)(mm)

    TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

      TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

        DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

          TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

            TS Coated Carbide Threading Cutter, for Internal Metric Threads

              Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                Planet Cutter Series MC - Planet Cutter PNGT

                  Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                    Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                      Thread Cutting Tool (for Unified Threads) MMTU

                        Planet Cutter Series NC Planet Cutter WX-PNC

                          Planet Cutter Series Super Planet DR-PNAC

                            Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                              Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                Brand

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                OSG

                                OSG

                                GUHRING

                                YAMAWA MFG

                                NS TOOL

                                OSG

                                OSG

                                OSG

                                OSG

                                GUHRING

                                Product Series

                                TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                                DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

                                TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                Planet Cutter Series MC - Planet Cutter PNGT

                                Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                Thread Cutting Tool (for Unified Threads) MMTU

                                Planet Cutter Series NC Planet Cutter WX-PNC

                                Planet Cutter Series Super Planet DR-PNAC

                                Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                                Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                Days to Ship 6 Day(s) or more 4 Day(s) or more 4 Day(s) or more 6 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 8 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 8 Day(s)
                                Screw size (Nominal)M2 ~ M12M3 ~ M20M3 ~ M16M1.4 ~ M20M3 ~ M12--M6 ~ M2006510X28R ~ 200505N300MNO.0-80UNF ~ 1/4-20UNC-M6 ~ M12M6 ~ M12-M6 ~ M20
                                Screw TypesMeterMeterMeterMeterMeterMeter / unifiedMeter / Taper for Pipe / Parallel for PipesMeterMeter / Taper for Pipe / Parallel for PipesunifiedMeter / unified / Taper for PipeMeterMeterMeterMeter
                                work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]-
                                Pitch (P), Number of Threading(mm)0.4 ~ 1.750.5 ~ 2.50.5 ~ 20.3 ~ 2.50.5 ~ 1.750.25 ~ 321 ~ 191 ~ 2.50.5 ~ 3-1 ~ 281 ~ 1.751 ~ 1.750.5 ~ 31 ~ 2.5
                                Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                                Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutter
                                Hole typeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind holeFor blind hole
                                Coating TypeTiAlNTiAlNDLCTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group) / OtherTiNTiCNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiCN
                                Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                                Overall Length (L)(mm)58 ~ 7357 ~ 11557 ~ 9239 ~ 10548 ~ 744080 ~ 21054 ~ 10250 ~ 1404560 ~ 12062 ~ 8962 ~ 8960 ~ 12054 ~ 102

                                Loading...

                                1. 1

                                Related Categories to Thread Cutters