• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 21:00 (SGT) 21/4/2019. We apologize for the inconvenience.
  • Please be informed that our office will be closed for upcoming Good Friday holiday on 19th April 2019. There may be potential delay of response/shipment from supplier due to Japan Golden Week holiday which falls on 27th April to 6th May 2019.
    We seek your kind understand, should there be any delay. Click here for details

Thread Cutters

Days to Ship
  • All
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

    TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

      TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

        Planet Cutter Series NC Planet Cutter WX-PNC

          DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

            TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

              TS Coated Carbide Threading Cutter, for Internal Metric Threads

                Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                  Planet Cutter Series MC - Planet Cutter PNGT

                    Planet Cutter Series Super Planet DR-PNAC

                      Planet Cutter Series NC Planet Cutter For Steel WX-ST-PNC

                        Planet Cutter Series Spiral Carbide Planet Cutter OT-SFT-PNGT

                          Planet Cutter Series Carbide Planet Cutter OT-PNGT

                            Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                              Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                MMTS Micro Threading Tool

                                  Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                    Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                      MC - Helical Cutter MC-HLC

                                        Carbide MC - Helical Cutter MC-CSLC

                                          Thread Cutting Tool (for Unified Threads) MMTU

                                            Thread End Mill

                                              Premium Thread Mill PRML

                                              Brand

                                              MISUMI

                                              MiSUMi C-VALUE

                                              MISUMI

                                              OSG

                                              MISUMI

                                              MiSUMi C-VALUE

                                              MISUMI

                                              MISUMI

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              OSG

                                              NS TOOL

                                              GUHRING

                                              GUHRING

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              NS TOOL

                                              NAKANISHI

                                              YAMAWA MFG

                                              Product Series

                                              TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                              TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

                                              Planet Cutter Series NC Planet Cutter WX-PNC

                                              DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                              TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                              TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                              Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                              Planet Cutter Series MC - Planet Cutter PNGT

                                              Planet Cutter Series Super Planet DR-PNAC

                                              Planet Cutter Series NC Planet Cutter For Steel WX-ST-PNC

                                              Planet Cutter Series Spiral Carbide Planet Cutter OT-SFT-PNGT

                                              Planet Cutter Series Carbide Planet Cutter OT-PNGT

                                              Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                                              Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                              MMTS Micro Threading Tool

                                              Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                              Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 4133

                                              MC - Helical Cutter MC-HLC

                                              Carbide MC - Helical Cutter MC-CSLC

                                              Thread Cutting Tool (for Unified Threads) MMTU

                                              Thread End Mill

                                              Premium Thread Mill PRML

                                              Days to Ship 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more Quote Quote Quote 3 Day(s) or more 3 Day(s) or more Quote Quote
                                              Screw TypesMeterMeterMeter / unified / Taper for PipeMeterMeterMeterMeter / unifiedMeter / Taper for Pipe / Parallel for PipesMeterMeterMeterMeter / Taper for Pipe / Parallel for PipesMeterMeterOtherMeterMeterMeter / Taper for Pipe / Parallel for PipesMeter / Taper for Pipe / Parallel for PipesunifiedMeterMeter
                                              Screw size (Nominal)M3 ~ M20M1.4 ~ M20-M3 ~ M16M2 ~ M12M3 ~ M12--M6 ~ M12---M6 ~ M12-S0.1 ~ S1.4M6 ~ M20M6 ~ M201015 ~ 32506N300M06510X28R ~ 200505N300MNO.0-80UNF ~ 1/4-20UNCM1.0 ~ M2.2-2.53.5 ~ 9
                                              Pitch (P), Number of Threading(mm)0.5 ~ 2.50.3 ~ 2.51 ~ 280.5 ~ 20.4 ~ 1.750.5 ~ 1.750.25 ~ 321 ~ 191 ~ 1.751 ~ 1.751 ~ 31 ~ 191 ~ 1.750.5 ~ 30.025 ~ 0.31 ~ 2.51 ~ 2.5-0.5 ~ 3--1
                                              Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCobalt HSSCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCobalt HSSCarbideCarbide-Carbide
                                              work materialLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]--Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]
                                              Tap TypeThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread cutterThread-cutting-related toolThread cutter
                                              Hole typeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor blind hole--
                                              Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable-Available
                                              Coating TypeTiAlNTiAlNTiAlNDLCTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group) / OtherTiNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiCNTiCNTiNTiAlNTiAlN-Other
                                              Overall Length (L)(mm)57 ~ 11539 ~ 10560 ~ 12057 ~ 9258 ~ 7348 ~ 744080 ~ 21062 ~ 8960 ~ 9560 ~ 14580 ~ 14562 ~ 8960 ~ 1204554 ~ 10254 ~ 10270 ~ 20050 ~ 1404550-

                                              Loading...

                                              1. 1

                                              Related Categories to Thread Cutters