(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Roll Taps(Screw size (Nominal):M14)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  • 13 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

      Seamless TAFLET

        High Performance Roll Taps, Coated_HP+RZ

          Fluteless Tap (X Performer)_S-XPF

            Roll Taps for Non-Ferrous Materials_N+RS

              Rolling Tap 1017

                Roll Taps for Medium Hardness Carbon Steels_MHRZ-J

                  Roll Taps for Steels_N+RZ

                  Brand

                  OSG

                  TANOI MFG

                  YAMAWA MFG

                  OSG

                  YAMAWA MFG

                  GUHRING

                  YAMAWA MFG

                  YAMAWA MFG

                  Product Series

                  Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

                  Seamless TAFLET

                  High Performance Roll Taps, Coated_HP+RZ

                  Fluteless Tap (X Performer)_S-XPF

                  Roll Taps for Non-Ferrous Materials_N+RS

                  Rolling Tap 1017

                  Roll Taps for Medium Hardness Carbon Steels_MHRZ-J

                  Roll Taps for Steels_N+RZ

                  Days to Ship 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) or more 7 Day(s) 4 Day(s) or more 7 Day(s) or more
                  Screw size (Nominal)M14M14M14M14M14M14M14M14
                  Screw TypesMeterMeterunifiedMeterMeterMeterMeterMeter
                  work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]
                  Pitch (P), Number of Threading(mm)1.5 ~ 21.5 ~ 21.51.5 ~ 21 ~ 221.51 ~ 2
                  Tool Material TypeVanadium High-Speed SteelHigh-speed steelPowder high-speed steelPowder high-speed steelHigh-speed steelHigh-speed steel-High-speed steel
                  Tap TypeRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tap
                  Hole typeFor blind hole-For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole-For through holeFor through hole / For blind hole
                  Chamfer threads (Lcf)2P ~ 4P1P ~ 2P2P ~ 4P2P2P ~ 4P-2P ~ 4P2P ~ 4P
                  Coating TypeTiNTiCNTiCNTiCN-TiN--
                  Coating Y/NAvailableAvailableAvailableAvailableNAAvailableAvailableNA
                  Overall Length (L)(mm)8888888888888888

                  Loading...

                  1. 1

                  Related Categories to Roll Taps