(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Roll Taps(Screw size (Nominal):M2.5)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  • 13 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

      Seamless TAFLET

        CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

          High Performance Roll Taps, Coated_HP+RZ

            Fluteless Tap (X Performer)_S-XPF

              CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                Roll Taps for Non-Ferrous Materials_N+RS

                  Taflet -L TFL

                    CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                      Taflet for Steel TFST

                        IT-Toughlet C Coated

                          Roll Taps, Coated_R+V

                            Taflet -S TFS

                              CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                                Rolling Tap 1017

                                  Roll Taps for Dry Tapping, Coated_OL+RZ

                                    IT-Toughlet TiCN Coated

                                      Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                        Roll Taps for Steels_N+RZ

                                          Roll Taps for Thin Soft Structural Steel Sheets_R-Y

                                            SU Roll Tap for SURZ Metric Screw Thread

                                              SU Roll Taps_SURZ

                                              Brand

                                              OSG

                                              TANOI MFG

                                              OSG

                                              YAMAWA MFG

                                              OSG

                                              OSG

                                              YAMAWA MFG

                                              NACHI(FUJIKOSHI)

                                              OSG

                                              NACHI(FUJIKOSHI)

                                              TANOI MFG

                                              YAMAWA MFG

                                              NACHI(FUJIKOSHI)

                                              OSG

                                              GUHRING

                                              YAMAWA MFG

                                              TANOI MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              YAMAWA MFG

                                              Product Series

                                              Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

                                              Seamless TAFLET

                                              CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                              High Performance Roll Taps, Coated_HP+RZ

                                              Fluteless Tap (X Performer)_S-XPF

                                              CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                                              Roll Taps for Non-Ferrous Materials_N+RS

                                              Taflet -L TFL

                                              CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                                              Taflet for Steel TFST

                                              IT-Toughlet C Coated

                                              Roll Taps, Coated_R+V

                                              Taflet -S TFS

                                              CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                                              Rolling Tap 1017

                                              Roll Taps for Dry Tapping, Coated_OL+RZ

                                              IT-Toughlet TiCN Coated

                                              Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                              Roll Taps for Steels_N+RZ

                                              Roll Taps for Thin Soft Structural Steel Sheets_R-Y

                                              SU Roll Tap for SURZ Metric Screw Thread

                                              SU Roll Taps_SURZ

                                              Days to Ship 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 4 Day(s) or more 7 Day(s) 7 Day(s) or more 9 Day(s) 9 Day(s) 8 Day(s)
                                              Screw size (Nominal)M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5M2.5
                                              Screw TypesMeterMeterMeterunifiedMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                              work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
                                              Pitch (P), Number of Threading(mm)0.450.450.450.450.450.450.35 ~ 0.450.450.450.450.35 ~ 0.450.450.450.450.450.450.35 ~ 0.450.450.35 ~ 0.450.450.450.45
                                              Tool Material TypeVanadium High-Speed SteelHigh-speed steelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelPowder high-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelPowder high-speed steel
                                              Tap TypeRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tap
                                              Hole typeFor blind hole-For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind holeFor blind hole-For through hole-For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind hole
                                              Chamfer threads (Lcf)2P ~ 4P2P2P ~ 4P2P2P ~ 4P1P2P ~ 4P2P ~ 4P2P ~ 4P2P ~ 4P1P ~ 4P2P ~ 4P2P ~ 4P2P-4P1P ~ 4P1P2P ~ 4P3P2P2P
                                              Coating TypeTiNTiCNTiCNTiCNTiCNTiCN--TiCN-OtherTiN-TiCNTiNTiCNTiCNTiCN--TiCNOther
                                              Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableNANAAvailableNAAvailableAvailableNAAvailableAvailableAvailableAvailableAvailableNANAAvailableAvailable
                                              Overall Length (L)(mm)44444446444446448044444644444444 ~ 46444644 ~ 46444646

                                              Loading...

                                              1. 1

                                              Related Categories to Roll Taps