(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Roll Taps(Screw size (Nominal):M1.2)

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  • 13 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

      CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

        High Performance Roll Taps, Coated_HP+RZ

          Fluteless Tap (X Performer)_S-XPF

            CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

              CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                Roll Taps for Non-Ferrous Materials_N+RS

                  IT-Toughlet C Coated

                    Roll Taps, Coated_R+V

                      CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                        Roll Taps for Dry Tapping, Coated_OL+RZ

                          Fluteless (Nu-Roll) Tap for Steels_NRT

                            IT-Toughlet TiCN Coated

                              Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                Roll Taps for Steels_N+RZ

                                  SU Roll Tap for SURZ Metric Screw Thread

                                    SU Roll Taps_SURZ

                                    Brand

                                    OSG

                                    OSG

                                    YAMAWA MFG

                                    OSG

                                    OSG

                                    OSG

                                    YAMAWA MFG

                                    TANOI MFG

                                    YAMAWA MFG

                                    OSG

                                    YAMAWA MFG

                                    OSG

                                    TANOI MFG

                                    YAMAWA MFG

                                    YAMAWA MFG

                                    YAMAWA MFG

                                    YAMAWA MFG

                                    Product Series

                                    Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

                                    CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                    High Performance Roll Taps, Coated_HP+RZ

                                    Fluteless Tap (X Performer)_S-XPF

                                    CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                                    CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                                    Roll Taps for Non-Ferrous Materials_N+RS

                                    IT-Toughlet C Coated

                                    Roll Taps, Coated_R+V

                                    CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                                    Roll Taps for Dry Tapping, Coated_OL+RZ

                                    Fluteless (Nu-Roll) Tap for Steels_NRT

                                    IT-Toughlet TiCN Coated

                                    Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                    Roll Taps for Steels_N+RZ

                                    SU Roll Tap for SURZ Metric Screw Thread

                                    SU Roll Taps_SURZ

                                    Days to Ship 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 9 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 9 Day(s) 9 Day(s)
                                    Screw size (Nominal)M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2
                                    Screw TypesMeterMeterunifiedMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                    work materialLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
                                    Pitch (P), Number of Threading(mm)0.250.250.250.250.250.250.250.2 ~ 0.250.250.250.250.250.2 ~ 0.250.250.250.250.25
                                    Tool Material TypeVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelPowder high-speed steelPowder high-speed steel
                                    Tap TypeRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tap
                                    Hole typeFor blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor blind holeFor through hole / For blind hole-For through hole / For blind holeFor blind holeFor through holeFor through hole / For blind hole-For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind hole
                                    Chamfer threads (Lcf)2P ~ 4P2P ~ 4P2P2P ~ 4P1P2P ~ 4P2P ~ 4P1P ~ 4P2P ~ 4P2P4P4P1P ~ 4P1P2P ~ 4P2P2P
                                    Coating TypeTiNTiCNTiCNTiCNTiCNTiCN-OtherTiNTiCNTiCNNon-CoatedTiCNTiCN-TiCNOther
                                    Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableNAAvailableAvailableNAAvailableAvailable
                                    Overall Length (L)(mm)323236323260363236323632323632 ~ 363636

                                    Loading...

                                    1. 1

                                    Related Categories to Roll Taps