(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Screw-Hole-Related Tools(work material:Quenched and tempered steel (35 to 45 HRC))

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

      SG Spiral Tap SGSP

        CPM Spiral Tap_CPM-SFT

          Fluteless Tap (X Performer)_S-XPF

            MMTS Micro Threading Tool

            • On Sale Till 31/03/2024

            Pointed Tap for Difficult-To-Cut Materials CPM-POT

              CPM Straight Flutes Tap_CPM-HT

                LH Spiral SYNCHRO Tap_HS-RFT

                  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

                    Z-PROPremium Thread Mills_PRML

                      TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                        LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

                          Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

                            Spiral Fluted Taps for Titanium Alloys_ZET-B

                              Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

                                TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                                  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                    CPM Spiral Tap V Coated_VP-SFT

                                      Planet Cutter Series MC - Planet Cutter PNGT

                                        CPM Pointed Tap with Long Shank_CPM-LT-POT

                                          Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

                                            Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

                                              CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

                                                Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                                  Hand Taps for Hard-to-Machine Materials_EH-HT

                                                    SG Point Tap SGPO

                                                      Thread Cutting Tool (for Unified Threads) MMTU

                                                        Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                                          Taper Pipe Thread Tap TiN coated_TIN-TPT

                                                            Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

                                                            Brand

                                                            OSG

                                                            NACHI(FUJIKOSHI)

                                                            OSG

                                                            OSG

                                                            NS TOOL

                                                            OSG

                                                            OSG

                                                            OSG

                                                            OSG

                                                            YAMAWA MFG

                                                            MISUMI

                                                            OSG

                                                            YAMAWA MFG

                                                            YAMAWA MFG

                                                            YAMAWA MFG

                                                            MISUMI

                                                            OSG

                                                            OSG

                                                            OSG

                                                            OSG

                                                            OSG

                                                            OSG

                                                            OSG

                                                            YAMAWA MFG

                                                            YAMAWA MFG

                                                            NACHI(FUJIKOSHI)

                                                            NS TOOL

                                                            OSG

                                                            OSG

                                                            OSG

                                                            Product Series

                                                            CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                                            SG Spiral Tap SGSP

                                                            CPM Spiral Tap_CPM-SFT

                                                            Fluteless Tap (X Performer)_S-XPF

                                                            MMTS Micro Threading Tool

                                                            Pointed Tap for Difficult-To-Cut Materials CPM-POT

                                                            CPM Straight Flutes Tap_CPM-HT

                                                            LH Spiral SYNCHRO Tap_HS-RFT

                                                            LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

                                                            Z-PROPremium Thread Mills_PRML

                                                            TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                                            LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

                                                            Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

                                                            Spiral Fluted Taps for Titanium Alloys_ZET-B

                                                            Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

                                                            TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                                                            Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                                            CPM Spiral Tap V Coated_VP-SFT

                                                            Planet Cutter Series MC - Planet Cutter PNGT

                                                            CPM Pointed Tap with Long Shank_CPM-LT-POT

                                                            Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

                                                            Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

                                                            CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

                                                            Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                                            Hand Taps for Hard-to-Machine Materials_EH-HT

                                                            SG Point Tap SGPO

                                                            Thread Cutting Tool (for Unified Threads) MMTU

                                                            Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                                            Taper Pipe Thread Tap TiN coated_TIN-TPT

                                                            Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

                                                            Days to Ship 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 11 Day(s) Same day or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 6 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more
                                                            Screw size (Nominal)No.2UN ~ M12M2 ~ M24M1.4 ~ M48M1 ~ M45S0.1 ~ S1.4M1.4 ~ M48M12M3 ~ M14M3 ~ M303.5 ~ 9M2 ~ M12M3 ~ M14M3 ~ M20M3 ~ M20M3 ~ M24M3 ~ M20-M3 ~ M12-M8 ~ M12R1 ~ R3/8R1 ~ R3/8R1 ~ R3/806510X28R ~ 200505N300MM3 ~ M30M1.4 ~ M24NO.0-80UNF ~ 1/4-20UNC-R1 ~ R3/8R1 ~ R3/8
                                                            Screw TypesMeter / unifiedMeterMeterMeterOtherMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter / unifiedMeterMeter / Taper for Pipe / Parallel for PipesMeterTaper for PipeTaper for PipeTaper for PipeMeter / Taper for Pipe / Parallel for PipesMeterMeterunifiedMeterTaper for PipeTaper for Pipe
                                                            work materialQuenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]
                                                            Pitch (P), Number of Threading(mm)0.25 ~ 560.25 ~ 30.3 ~ 50.2 ~ 4.50.025 ~ 0.30.3 ~ 51.750.5 ~ 20.5 ~ 3.50.75 ~ 1.750.4 ~ 1.750.5 ~ 20.5 ~ 2.50.5 ~ 2.50.5 ~ 30.5 ~ 2.50.4 ~ 320.5 ~ 1.751 ~ 191.25 ~ 1.7511 ~ 2811 ~ 1911 ~ 280.5 ~ 30.5 ~ 3.50.25 ~ 3-0.5 ~ 311 ~ 2811 ~ 28
                                                            Tool Material TypePowder high-speed steelAlloy HSSPowder high-speed steelPowder high-speed steel / Vanadium High-Speed SteelCarbidePowder high-speed steelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelCarbideCarbideVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelCobalt HSSCarbideCarbidePowder high-speed steelCobalt HSSPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelCarbideCobalt HSSHigh-speed steelCarbideCarbideVanadium High-Speed SteelVanadium High-Speed Steel
                                                            Tap TypeRoll tapSpiral TapSpiral TapRoll tapThread cutterPoint tapHand TapPoint tapPoint tapThread cutterThread cutterPoint tapSpiral TapSpiral TapPoint tapThread cutterThread cutterSpiral TapThread cutterPoint tapTap for pipesTap for pipesTap for pipesThread cutterHand TapPoint tapThread cutterThread cutterTap for pipesTap for pipes
                                                            Hole typeFor blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind hole-For through holeFor through hole / For blind holeFor through holeFor through hole-For through hole / For blind holeFor through holeFor through holeFor blind holeFor through holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole
                                                            Chamfer threads (Lcf)2P ~ 4P2.53P2P ~ 4P-5P2P ~ 5P6P6P--5P5P3P4.5P--2.5P-5P2.5P2.5P2.5P-2.5P ~ 5P5--2.5P2.5P
                                                            Coating TypeTiCNTiCNNon-CoatedTiCNTiAlNNon-CoatedNon-CoatedTiNTiNOtherTiAlNTiN---TiAlNFor High Hardness (Silicon Group) / OtherTiCNTiNNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiAlN-TiCNTiAlNTiAlNTiNTiN
                                                            Coating Y/NAvailableAvailableNAAvailableAvailableNANAAvailableAvailableAvailableAvailableAvailableNANANAAvailableAvailableAvailableAvailableNANANANAAvailableNAAvailableAvailableAvailableAvailableAvailable
                                                            Overall Length (L)(mm)30 ~ 8240 ~ 12034 ~ 18530 ~ 2204534 ~ 1858246 ~ 88100 ~ 200-58 ~ 7346 ~ 8846 ~ 10546 ~ 10546 ~ 12057 ~ 1154046 ~ 8280 ~ 21015055 ~ 9562 ~ 95120 ~ 15050 ~ 14046 ~ 13534 ~ 1204560 ~ 12055 ~ 9555 ~ 95

                                                            Loading...

                                                            1. 1

                                                            Related Categories to Screw-Hole-Related Tools