(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Screw-Hole-Related Tools（Screw size (Nominal)：5/16）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.Standard Price: SGD 18.63- Days to Ship: 7 Day(s) or more -
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.Standard Price: SGD 17.12- Days to Ship: 7 Day(s) or more -
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.Standard Price: SGD 19.50- Days to Ship: 8 Day(s) or more -
Long Shank Spiral Pointed Taps_LS-PO
YAMAWA MFG
* LS-N-PO will switch to LS-PO as soon as the stock runs out.
Standard Price: SGD 36.40- Days to Ship: 7 Day(s) or more -
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.Standard Price: SGD 25.55- Days to Ship: 4 Day(s) or more -
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.Standard Price: SGD 27.21- Days to Ship: 4 Day(s) or more -
Spiral Fluted Taps, Oxidized_SP-OX
YAMAWA MFG
Spiral taps with oxide treatment (OX).
[Features]
· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil.
· The oil pocket acts to reduce the frictional resistance, preventing parts welding together, and improves the finished surface roughness of the female thread.
· Oxide treatment also removes residual stress from the tap, extending the life span.
[Applications]
· Ideal for machining easily welded materials such as stainless steel or low carbon steel.Standard Price: SGD 33.78 Days to Ship: 7 Day(s) -
Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S
YAMAWA MFG
5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.
Standard Price: SGD 47.91- Days to Ship: 9 Day(s) -
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.Standard Price: SGD 85.08- Days to Ship: 7 Day(s) or more -
Long Shank Spiral Fluted Taps_LS-SP
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.
Standard Price: SGD 44.14- Days to Ship: 7 Day(s) or more -
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: SGD 67.29- Days to Ship: 7 Day(s) or more -
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.Standard Price: SGD 87.62 Days to Ship: 9 Day(s) -
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.
[Features]
· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.
· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.
· Screw precision in accordance with class 1b.
· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.
[Applications]
Ideal for machining female threads for inserting insert coils after threading.Standard Price: SGD 51.17 Days to Ship: 7 Day(s) or more -
Hand Taps for Bicycle Threads_HT-BC
YAMAWA MFG
[Features]
· Tap for bicycle screw threading (general purpose).Standard Price: SGD 35.63 Days to Ship: 7 Day(s) -
Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S
YAMAWA MFG
[Features]
· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.
· High-speed tool steel is used out of consideration for abrasion resistance.
· Can be used for blind holes.Standard Price: SGD 47.91 Days to Ship: 9 Day(s) -
Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T
YAMAWA MFG
[Features]
· (Taper type) Roll tap pilot hole check pin that can be used to easily check pilot hole diameters with the 1 tool.
· High-speed tool steel is used out of consideration for abrasion resistance.
· Can be used for both through-holes and blind-holes if the latter has ample room.Standard Price: SGD 35.63 Days to Ship: 9 Day(s) -
Solid Round Dies for Left Hand Threads_D-LH
YAMAWA MFG
■ Solid round dies for left hand thread processingwith improved runout accuracy.
Standard Price: SGD 183.92 Days to Ship: 9 Day(s) -
Solid Round Dies for Left Hand Threads_D-LH
YAMAWA MFG
A solid die for machining left-hand threads with improved run-out accuracy.
Standard Price: SGD 183.92 Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S | Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T | ||||||||||||||
| Days to Ship | 7 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) | 9 Day(s) | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 7 Day(s) or more | 7 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 7 Day(s) or more |
| Screw size (Nominal) | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 | 5/16 |
| Screw Types | unified / Whitworth | unified | unified / Whitworth | unified / Whitworth | unified / Whitworth | unified / Whitworth | unified / Whitworth | unified | unified | unified / Whitworth | unified | Whitworth | unified | Other | unified | unified | unified | unified |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | - | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | - | - | - | - | - |
| Pitch (P), Number of Threading(mm) | 18 ～ 32 | 18 ～ 32 | 18 ～ 32 | 18 ～ 24 | 18 ～ 24 | 18 ～ 24 | 18 ～ 24 | 18 ～ 24 | 18 ～ 32 | 18 ～ 24 | 18 ～ 24 | 18 | 18 ～ 24 | 26 | 18 ～ 24 | 18 ～ 24 | 18 | 18 ～ 24 |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Point tap | Hand Tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Spiral Tap | Thread-cutting-related tool | Die | Spiral Tap | Hand Tap | Die | Hand Tap | Hand Tap | Thread-cutting-related tool | Thread-cutting-related tool | Die | Die |
| Hole type | For through hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | - | - |
| Chamfer threads (Lcf) | 5P | 1.5P ～ 5P | 2.5P | 5P | 5P | 2.5P | 2.5P | - | - | 2.5P | 1.5P ～ 5P | - | 1.5P ～ 5P | 1.5P ～ 5P | - | - | - | - |
| Coating Type | - | - | - | - | - | - | - | - | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 70 | 70 | 70 | 100 ～ 150 | 70 | 70 | 70 | 99 | - | 100 ～ 150 | 150 ～ 200 | - | 75 | 70 | 99 | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- No.10
- No.1
- No.1UN
- No.10UN
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- M2～8
- M2～10
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- M3～8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- M5
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 13
- 5/16
- 5/16UN
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- 5.5M
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- TV8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.8
- 0.9
- 1
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- YAMAWA MFG (18)
- ISHIHASHI (0)
- NS TOOL (0)
- KANETEC (0)
- KO-KEN TOOL (0)
- NEW STRONG (0)
- SK 11 (0)
- SKC (0)
- H & H (0)
- NIIGATA SEIKI (SK) (0)
- ONISHI MANUFACTURING (0)
- RENNSTEIG (0)
- TSUBOSAN (0)
- MITSUTOMO (0)
- TOP (0)
- HOZAN (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- UNION TOOL (0)
- RUKO (0)
- TANOI MFG (0)
- EIKOSHA (0)
- TRUSCO NAKAYAMA (0)
- NACHI(FUJIKOSHI) (0)
- ESCO (0)
- OSG (0)
- GUHRING (0)
- NOGA JAPAN (0)
- SANDVIK (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?