(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Screw-Hole-Related Tools(Screw size (Nominal):M13)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Pointed Tap Series, General Purpose EX-POT

    • On Sale Till 31/03/2024

    Spiral Pointed Taps_PO

    • On Sale Till 31/03/2024

    Spiral Tap for General Application_EX-SFT

      Hand Taps_HT

        Solid Round Dies_D

          Hand Tap, for Metric Fine Threads (Angle: 60°)

            Spiral Fluted Taps_SP

              Threading Round Die Series Pipe General Threading Round Die RD-S

              Brand

              OSG

              YAMAWA MFG

              OSG

              YAMAWA MFG

              YAMAWA MFG

              SKC

              YAMAWA MFG

              OSG

              Product Series

              Pointed Tap Series, General Purpose EX-POT

              Spiral Pointed Taps_PO

              Spiral Tap for General Application_EX-SFT

              Hand Taps_HT

              Solid Round Dies_D

              Hand Tap, for Metric Fine Threads (Angle: 60°)

              Spiral Fluted Taps_SP

              Threading Round Die Series Pipe General Threading Round Die RD-S

              Days to Ship 4 Day(s) or more 7 Day(s) 4 Day(s) or more 7 Day(s) or more 7 Day(s) or more 4 Day(s) or more 7 Day(s) 3 Day(s)
              Screw size (Nominal)M13M13M13M13M13M13M13M13
              Screw TypesMeterMeterMeterMeterMeterMeterMeterMeter
              work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]-
              Pitch (P), Number of Threading(mm)1 ~ 1.751 ~ 1.51 ~ 1.750.5 ~ 1.750.5 ~ 1.50.510.5 ~ 1.75
              Tool Material TypeVanadium High-Speed SteelHigh-speed steelVanadium High-Speed SteelHigh-speed steelHigh-speed steel-High-speed steelAlloy HSS
              Tap TypePoint tapPoint tapSpiral TapHand TapDieHand TapSpiral TapDie
              Hole typeFor through holeFor through holeFor blind holeFor through hole / For blind hole--For blind hole-
              Chamfer threads (Lcf)5P5P2.5P1.5P ~ 5P-5P2.5P-
              Coating TypeNon-Coated-Non-Coated----Non-Coated
              Coating Y/NNANANANANA-NANA
              Overall Length (L)(mm)88888885 ~ 88--88-

              Loading...

              1. 1

              Related Categories to Screw-Hole-Related Tools