(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Screw-Hole-Related Tools(Screw size (Nominal):M1.2)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Pointed Tap Series, General Purpose EX-POT

      Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

      • On Sale Till 31/03/2024

      Spiral Pointed Taps_PO

      • On Sale Till 31/03/2024

      Spiral Tap for General Application_EX-SFT

        Hand Taps_HT

          CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

            Solid Round Dies_D

              Spiral Fluted Taps_SP

                High Performance Roll Taps, Coated_HP+RZ

                  Fluteless Tap (X Performer)_S-XPF

                    CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                      Roll Taps for Non-Ferrous Materials_N+RS

                        CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                          IT-Toughlet C Coated

                            Roll Taps, Coated_R+V

                              Hand Taps for Left Hand Threads_HT-LH

                                CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                                  Roll Taps for Dry Tapping, Coated_OL+RZ

                                    Rolling Dies_MS-RS-D

                                      HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D

                                        Fluteless (Nu-Roll) Tap for Steels_NRT

                                          IT-Toughlet TiCN Coated

                                            Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                              Roll Taps for Steels_N+RZ

                                                SU Roll Tap for SURZ Metric Screw Thread

                                                  Spiral Fluted Taps 1.5P_SP-1.5P

                                                    SU Roll Taps_SURZ

                                                    Brand

                                                    OSG

                                                    OSG

                                                    YAMAWA MFG

                                                    OSG

                                                    YAMAWA MFG

                                                    OSG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    OSG

                                                    OSG

                                                    YAMAWA MFG

                                                    OSG

                                                    TANOI MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    OSG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    OSG

                                                    TANOI MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    YAMAWA MFG

                                                    Product Series

                                                    Pointed Tap Series, General Purpose EX-POT

                                                    Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

                                                    Spiral Pointed Taps_PO

                                                    Spiral Tap for General Application_EX-SFT

                                                    Hand Taps_HT

                                                    CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                                    Solid Round Dies_D

                                                    Spiral Fluted Taps_SP

                                                    High Performance Roll Taps, Coated_HP+RZ

                                                    Fluteless Tap (X Performer)_S-XPF

                                                    CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

                                                    Roll Taps for Non-Ferrous Materials_N+RS

                                                    CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT

                                                    IT-Toughlet C Coated

                                                    Roll Taps, Coated_R+V

                                                    Hand Taps for Left Hand Threads_HT-LH

                                                    CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT

                                                    Roll Taps for Dry Tapping, Coated_OL+RZ

                                                    Rolling Dies_MS-RS-D

                                                    HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D

                                                    Fluteless (Nu-Roll) Tap for Steels_NRT

                                                    IT-Toughlet TiCN Coated

                                                    Torqueless Roll Taps with Short Chamfer_SC-TL-RZ

                                                    Roll Taps for Steels_N+RZ

                                                    SU Roll Tap for SURZ Metric Screw Thread

                                                    Spiral Fluted Taps 1.5P_SP-1.5P

                                                    SU Roll Taps_SURZ

                                                    Days to Ship 4 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 7 Day(s) 4 Day(s) or more 7 Day(s) or more 10 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 4 Day(s) or more 9 Day(s) 7 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) 9 Day(s) 7 Day(s) 9 Day(s)
                                                    Screw size (Nominal)M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2M1.2
                                                    Screw TypesMeterMeterMeterMeterMeterMeterMeterMeterunifiedMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                                    work materialMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]--Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Medium carbon steel (carbon content 0.25 to 0.45%)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
                                                    Pitch (P), Number of Threading(mm)0.250.250.250.250.2 ~ 0.250.250.2 ~ 0.250.250.250.250.250.250.250.2 ~ 0.250.250.250.250.250.250.250.250.2 ~ 0.250.250.250.250.250.25
                                                    Tool Material TypeVanadium High-Speed SteelVanadium High-Speed SteelHigh-speed steelVanadium High-Speed SteelHigh-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelVanadium High-Speed SteelPowder high-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelPowder high-speed steelHigh-speed steelHigh-speed steelHigh-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelPowder high-speed steelHigh-speed steelPowder high-speed steel
                                                    Tap TypePoint tapRoll tapPoint tapSpiral TapHand TapRoll tapDieSpiral TapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapRoll tapHand TapRoll tapRoll tapDieDieRoll tapRoll tapRoll tapRoll tapRoll tapSpiral TapRoll tap
                                                    Hole typeFor through holeFor blind holeFor through holeFor blind holeFor through hole / For blind holeFor blind hole-For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor blind hole-For through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole--For through hole / For blind hole-For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor blind hole
                                                    Chamfer threads (Lcf)5P2P ~ 4P5P2.5P1.5P ~ 5P2P ~ 4P-2.5P2P2P ~ 4P1P2P ~ 4P2P ~ 4P1P ~ 4P2P ~ 4P1.5P ~ 5P2P4P--4P1P ~ 4P1P2P ~ 4P2P1.5P2P
                                                    Coating TypeNon-CoatedTiN-Non-Coated-TiCN--TiCNTiCNTiCN-TiCNOtherTiN-TiCNTiCN--Non-CoatedTiCNTiCN-TiCN-Other
                                                    Coating Y/NNAAvailableNANANAAvailableNANAAvailableAvailableAvailableNAAvailableAvailableAvailableNAAvailableAvailableNANANAAvailableAvailableNAAvailable-Available
                                                    Overall Length (L)(mm)323236323632-3636323236603236363236--32323632 ~ 36363636

                                                    Loading...

                                                    1. 1

                                                    Related Categories to Screw-Hole-Related Tools