(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Thread Cutting Holders(Shank size:Ø16)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Screw Type
Pitch(mm)
Minimum Machining Diameter(mm)
Selfishly
Shank size
With/Without Cutting Oil Hole
With/without flat cutting blade

    SEC-Threading Bit, THI Type

      T-Max, U-Lock, Cutting Head, Inner Diameter Threading, R/L566.0KFC-11

      Brand

      SUMITOMO ELECTRIC HARDMETAL

      SANDVIK

      Product Series

      SEC-Threading Bit, THI Type

      T-Max, U-Lock, Cutting Head, Inner Diameter Threading, R/L566.0KFC-11

      Days to Ship 4 Day(s) or more 10 Day(s)
      ApplicationInternal threadInternal thread
      Screw Type60° Meter (M)60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT)
      Pitch(mm)0.40~1.000.5-2.0
      Minimum Machining Diameter(mm)1820
      SelfishlyRight-handRight-hand / Left-hand
      Shank sizeØ16Ø16
      With/Without Cutting Oil Hole-Available
      With/without flat cutting bladeBoth yes and noNA

      Loading...

      1. 1

      Related Categories to Thread Cutting Holders