(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Thread Cutting Holders(Shank size:12 Sq.)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Screw Type
Pitch(mm)
Minimum Machining Diameter(mm)
Selfishly
Shank size
With/Without Cutting Oil Hole
With/without flat cutting blade

    CoroThread 266, Shank Tool Bit, Screw Clamp, Millimeter Version, 266R/LFA

      CoroThread 266, Shank Tool Bit, QS Series Short, QS-266RFA-16

        SEC-Threading Bit, STH Type

          SEC-Threading Bit, Nejikiri-Kun, STE Type

            SEC-Threading Bit (mini bit), THE Type

            Brand

            SANDVIK

            SANDVIK

            SUMITOMO ELECTRIC HARDMETAL

            SUMITOMO ELECTRIC HARDMETAL

            SUMITOMO ELECTRIC HARDMETAL

            Product Series

            CoroThread 266, Shank Tool Bit, Screw Clamp, Millimeter Version, 266R/LFA

            CoroThread 266, Shank Tool Bit, QS Series Short, QS-266RFA-16

            SEC-Threading Bit, STH Type

            SEC-Threading Bit, Nejikiri-Kun, STE Type

            SEC-Threading Bit (mini bit), THE Type

            Days to Ship 10 Day(s) 10 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more
            ApplicationOuter Diameter ScrewOuter Diameter ScrewOuter Diameter ScrewOuter Diameter ScrewOuter Diameter Screw
            Screw Type60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / American Pipe Taper (NPT)60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes / American Pipe Taper (NPT)60° Meter (M) / 55°C Whitworth (W)60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes
            Pitch(mm)--0.20~1.501.00~3.000.80~3.00
            Minimum Machining Diameter(mm)-----
            SelfishlyRight-hand / Left-handRight-hand / No-handRight-hand / Left-handRight-handRight-hand
            Shank size12 Sq.12 Sq.12 Sq.12 Sq.12 Sq.
            With/Without Cutting Oil HoleNANA---
            With/without flat cutting bladeNANANABoth yes and noBoth yes and no

            Loading...

            1. 1

            Related Categories to Thread Cutting Holders