(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Thread Cutting Holders(Pitch:0.20~1.50)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 4 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Screw Type
Pitch(mm)
Minimum Machining Diameter(mm)
Selfishly
Shank size
With/Without Cutting Oil Hole
With/without flat cutting blade

    SEC-Threading Bit, STH Type

    Brand

    SUMITOMO ELECTRIC HARDMETAL

    Product Series

    SEC-Threading Bit, STH Type

    Days to Ship 4 Day(s) or more
    ApplicationOuter Diameter Screw
    Screw Type60° Meter (M) / 55°C Whitworth (W)
    Pitch(mm)0.20~1.50
    Minimum Machining Diameter(mm)-
    SelfishlyRight-hand / Left-hand
    Shank size10 Sq. / 12 Sq. / 16 Sq. / 20 Sq.
    With/Without Cutting Oil Hole-
    With/without flat cutting bladeNA

    Loading...

    1. 1

    Related Categories to Thread Cutting Holders