(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Holding Tools for O.D. Tuning

419 items

: 30; 45; 60

Days to Ship	All 4 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 15 Day(s) or Less 18 Day(s) or Less

1
2
3
4
5
Next >>

AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)

KYOCERA

Back surface clamping type / screw clamping type small tool holder (outer diameter).

Standard Price:	SGD 106.24-
Days to Ship:	10 Day(s)

SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder

KYOCERA

[Features]
·This is SDJC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and profiling

Standard Price:	SGD 88.80-
Days to Ship:	4 Day(s) or more

Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN

SANDVIK

[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.

Standard Price:	SGD 164.30-
Days to Ship:	8 Day(s) or more

SVJB Type (outer diameter, profile machining)

KYOCERA

Back surface clamping type / screw clamping type small tool holder (outer diameter).

Standard Price:	SGD 105.15-
Days to Ship:	8 Day(s) or more

Holder For Front-Turning, DS-SDU-ACH

NGK SPARK PLUG

[Features]
· DS holder with a center-height adjustment feature: The height of the blade tip can be easily adjusted with a single wrench by employing an original center-height adjustment feature (center-height adjustment range: 0 to 0.2 mm)
· Reduces the time spent on achieving precision.
· Improved damping performance with an optimal design

Standard Price:	SGD 561.78-
Days to Ship:	15 Day(s) or more

SVVB Type (outer diameter, profile machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

Standard Price:	SGD 88.80-
Days to Ship:	4 Day(s) or more

Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L

SANDVIK

Standard Price:	SGD 167.78-
Days to Ship:	7 Day(s) or more

Holder For Back-Turning, DS-GTT

NGK SPARK PLUG

[Features]
DS holder for back turning.
A right-handed tip is used for the left-handed holder.
[Cutting Direction]Left hand
[Applications]
Suitable for grooving.

Standard Price:	SGD 314.46-
Days to Ship:	15 Day(s) or more

PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

KYOCERA

[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: Positive 7 (C), negative 0° (N); clamp method: pin lock (P), non-ISO standard

Standard Price:	SGD 99.70-
Days to Ship:	4 Day(s) or more

SEC-D Type Bit DVJN Type

SUMITOMO ELECTRIC HARDMETAL

[Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

Standard Price:	SGD 138.22-
Days to Ship:	6 Day(s) or more

PVPN Type (External Diameter, Copying/Undercutting)

KYOCERA

[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

Standard Price:	SGD 122.44-
Days to Ship:	4 Day(s) or more

CRSN-A Type (Outer Diameter Machining / End Machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: R (round); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

Standard Price:	SGD 199.96-
Days to Ship:	4 Day(s) or more

SCLC Type (External Diameter/End-Face Machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

Standard Price:	SGD 90.84-
Days to Ship:	4 Day(s) or more

SVPB Type (outer diameter, end surface, profile, relief machining)

KYOCERA

[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

Standard Price:	SGD 99.56-
Days to Ship:	4 Day(s) or more

Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4

SANDVIK

Stable clamping for both non-hole inserts and inserts with dimple holes

Standard Price:	SGD 279.38-
Days to Ship:	10 Day(s)

Sandvik T-Max S Top Clamp Shank Bit

SANDVIK

[Features]
· Turning bit for outer diameter machining
[Applications]
· For edge surface treatment

Standard Price:	SGD 274.80-
Days to Ship:	8 Day(s)

DDJN Type (Outer Diameter Machining / Profiling)

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

Standard Price:	SGD 105.15-
Days to Ship:	4 Day(s) or more

WTKN-N Type (outer diameter, end surface, profile machining)

KYOCERA

[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

Standard Price:	SGD 120.40-
Days to Ship:	8 Day(s) or more

WTEN-N Type (outer diameter, chamfer machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and chamfering; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

Standard Price:	SGD 120.40-
Days to Ship:	8 Day(s) or more

SDJC Type (External Diameter, Profiling) Holder

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

Standard Price:	SGD 88.80-
Days to Ship:	4 Day(s) or more

S...SDUC Type (External Diameter, Profiling)

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

Standard Price:	SGD 270.67-
Days to Ship:	4 Day(s) or more

S...SVUB (C) Type (Outer Diameter and Undercutting Machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 5° (B); clamp method: screw-on (S)

Standard Price:	SGD 351.46-
Days to Ship:	4 Day(s) or more

Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L

SANDVIK

Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.

Standard Price:	SGD 421.40-
Days to Ship:	8 Day(s) or more

SEC-Outer Diameter Bit, ETXN Type

SUMITOMO ELECTRIC HARDMETAL

Pin Lock Type, For General/End Face Cutting

Standard Price:	SGD 67.71-
Days to Ship:	4 Day(s) or more

SEC-Wide Bit, SGW Type

SUMITOMO ELECTRIC HARDMETAL

High-efficiency roughing of long components is possible. Spring shaped cutting chips are unlikely to become entangled in workpieces or machinery.

Standard Price:	SGD 169.91
Days to Ship:	4 Day(s) or more

SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)

SUMITOMO ELECTRIC HARDMETAL

Screw-on type. General / Profiling Milling

Standard Price:	SGD 92.84-
Days to Ship:	4 Day(s) or more

SEC-70 Type Tool Bit, PRGC Type

SUMITOMO ELECTRIC HARDMETAL

Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PRGC type.

Standard Price:	SGD 89.32-
Days to Ship:	4 Day(s) or more

PCLN Type (External Diameter/End-Face Machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

Standard Price:	SGD 96.29-
Days to Ship:	4 Day(s) or more

WTJN-N Type (outer diameter, profile machining)

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

Standard Price:	SGD 120.40-
Days to Ship:	8 Day(s) or more

DVLN Type (External Diameter, Profiling)

KYOCERA

[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

Standard Price:	SGD 105.15-
Days to Ship:	8 Day(s) or more

DVPN Type (External Diameter, Profiling/Undercutting)

KYOCERA

Standard Price:	SGD 126.95-
Days to Ship:	8 Day(s) or more

CSKN-A Type (End Machining)

KYOCERA

Holder for clamp-on type solid CBN tools.

Standard Price:	SGD 199.96
Days to Ship:	4 Day(s) or more

KTKF Type/KTKF Type Space Holder

KYOCERA

Screw clamping type back turning (outer diameter) holder.

Standard Price:	SGD 155.28-
Days to Ship:	4 Day(s) or more

SCLC-FF Type (without Offset) (External Diameter / End Face Machining)

KYOCERA

[Features]
·This is SCLC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and flange

Standard Price:	SGD 90.84-
Days to Ship:	8 Day(s) or more

SDXC Type (External Diameter, End Face, Profiling)

KYOCERA

[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

Standard Price:	SGD 88.80-
Days to Ship:	10 Day(s)

SVJB-FF Type (not offset) (outer diameter, profile machining)

KYOCERA

Back surface clamping type / screw clamping type small tool holder (outer diameter).

Standard Price:	SGD 88.80-
Days to Ship:	8 Day(s) or more

QS Holding System Stepping CoroTurn 107 Bit

SANDVIK

Unique shape exhibits high performance

Standard Price:	SGD 469.50
Days to Ship:	10 Day(s)

Shank Tool Bit T-Max P Lever Clamp PCLNR/L

SANDVIK

[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.

Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

T-Max P, Turning Cutting Unit, C8-PRSCL

SANDVIK

T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

Standard Price:	SGD 583.50
Days to Ship:	10 Day(s)

T-Max S Shank Tool Bit For Turning, CTTPR/L

SANDVIK

T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

Standard Price:	SGD 207.07-
Days to Ship:	10 Day(s)

CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

SANDVIK

Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

Standard Price:	SGD 622.40-
Days to Ship:	8 Day(s) or more

Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L

SANDVIK

For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high quality

Standard Price:	SGD 421.40-
Days to Ship:	10 Day(s)

Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4

SANDVIK

Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.

Standard Price:	SGD 474.31-
Days to Ship:	10 Day(s)

Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP

SANDVIK

Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.

Standard Price:	SGD 1,369.30
Days to Ship:	10 Day(s)

CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP

SANDVIK

Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machining

Standard Price:	SGD 806.90-
Days to Ship:	10 Day(s)


Brand
Product Series
Days to Ship
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)


Brand	KYOCERA	KYOCERA	SANDVIK	KYOCERA	NGK SPARK PLUG	KYOCERA	SANDVIK	NGK SPARK PLUG	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)	SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN	SVJB Type (outer diameter, profile machining)	Holder For Front-Turning, DS-SDU-ACH	SVVB Type (outer diameter, profile machining)	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L	Holder For Back-Turning, DS-GTT	PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)	SEC-D Type Bit DVJN Type	PVPN Type (External Diameter, Copying/Undercutting)	CRSN-A Type (Outer Diameter Machining / End Machining)	SCLC Type (External Diameter/End-Face Machining)	SVPB Type (outer diameter, end surface, profile, relief machining)	Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4	Sandvik T-Max S Top Clamp Shank Bit	DDJN Type (Outer Diameter Machining / Profiling)	WTKN-N Type (outer diameter, end surface, profile machining)	WTEN-N Type (outer diameter, chamfer machining)	SDJC Type (External Diameter, Profiling) Holder	S...SDUC Type (External Diameter, Profiling)	S...SVUB (C) Type (Outer Diameter and Undercutting Machining)	Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L	SEC-Outer Diameter Bit, ETXN Type	SEC-Wide Bit, SGW Type	SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)	SEC-70 Type Tool Bit, PRGC Type	PCLN Type (External Diameter/End-Face Machining)	WTJN-N Type (outer diameter, profile machining)	DVLN Type (External Diameter, Profiling)	DVPN Type (External Diameter, Profiling/Undercutting)	CSKN-A Type (End Machining)	KTKF Type/KTKF Type Space Holder	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	SDXC Type (External Diameter, End Face, Profiling)	SVJB-FF Type (not offset) (outer diameter, profile machining)	QS Holding System Stepping CoroTurn 107 Bit	Shank Tool Bit T-Max P Lever Clamp PCLNR/L	T-Max P, Turning Cutting Unit, C8-PRSCL	T-Max S Shank Tool Bit For Turning, CTTPR/L	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L	Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4	Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP	CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP
Days to Ship	10 Day(s)	4 Day(s) or more	8 Day(s) or more	8 Day(s) or more	15 Day(s) or more	4 Day(s) or more	7 Day(s) or more	15 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	10 Day(s)	8 Day(s)	4 Day(s) or more	8 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	10 Day(s)	8 Day(s) or more	10 Day(s)	4 Day(s) or more	10 Day(s)	10 Day(s)	8 Day(s) or more	10 Day(s)	10 Day(s)	10 Day(s)	10 Day(s)
Applicable Tip Shape	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	S (Rectangular)	V (35° Diamond-Shaped)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	S (Rectangular)	-	R (Circular)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	R (Circular)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	C (80° Diamond-Shape)	-	D (55° Diamond-Shape)	T (Triangle)	T (Triangle)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	T (Triangle)	Other	D (55° Diamond-Shape)	R (Circular)	C (80° Diamond-Shape)	T (Triangle)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	S (Rectangular)	Other	C (80° Diamond-Shape)	D (55° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	R (Circular)	T (Triangle)	C (80° Diamond-Shape)	R (Circular)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	S (Rectangular)
Applicable Chip Clearance Angle	Pozidriv	Pozidriv	Negative	Pozidriv	-	Pozidriv	Negative	-	Negative / Pozidriv	Negative	Negative	Negative	Pozidriv	Pozidriv	-	-	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	-	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Negative	-	Pozidriv	Pozidriv	Pozidriv	-	Negative	-	-	-	Pozidriv	-	-	Negative
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Left-hand	No-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Post-Grinding	Outer Diameter / Profiling	-	Outer Diameter / Profiling	Outer Diameter	Post-Grinding	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / End Face	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / End Face	Outer Diameter / End Face / Profiling	Outer Diameter / Chamfer	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face	Outer Diameter	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	End Face	Post-Grinding	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / End Face / Profiling	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / End Face / Profiling	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer / Post-Grinding	Outer Diameter / End Face / Post-Grinding
Clamp Shape	Back Surface Clamp	Screw-on	Cable clamp	Screw-on	-	Screw-on	Cable clamp	-	Lever lock	Cable clamp	Pin Lock	Clamp-on	Screw-on	Screw-on	Clamp-on	-	Cable clamp	Wedge Lock	Wedge Lock	Screw-on	Screw-on	Screw-on	Double Clamp	Pin Lock	-	Screw-on	Lever lock	Lever lock	Wedge Lock	Cable clamp	Cable clamp	Clamp-on	Other	Screw-on	Screw-on	Screw-on	Clamp-on	Lever lock	-	Clamp-on	Lever lock	Clamp-on	Clamp-on	Clamp-on	Pin Lock
Shank height(mm)	-	-	16 ～ 40	-	-	-	20 ～ 50	-	-	20 ～ 25	20 ～ 25	-	10 ～ 25	10 ～ 25	25 ～ 32	-	-	-	-	-	13 ～ 23	17 ～ 23	-	12 ～ 25	12 ～ 16	8 ～ 25	20 ～ 32	16 ～ 32	-	-	-	-	-	8 ～ 18	-	-	16	20	-	25	-	-	-	-	-
Shank width(mm)	-	-	16 ～ 40	-	-	-	20 ～ 50	-	-	20 ～ 25	20 ～ 25	-	10 ～ 25	10 ～ 25	25 ～ 32	-	-	-	-	-	13 ～ 23	17 ～ 23	-	12 ～ 25	12 ～ 16	8 ～ 25	20 ～ 32	16 ～ 32	-	-	-	-	-	8 ～ 16	-	-	16	20	-	25	-	-	-	-	-