(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 21/4/2024 to 6:00 (SGT) 22/4/2024. We apologize for the inconvenience.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Square HSS End Mills（work material：Cast Iron）
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
G Standard End Mill, 4-Flute 4GE
NACHI(FUJIKOSHI)
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
Standard Price: SGD 38.35- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
Standard Price: SGD 29.96- Days to Ship: 4 Day(s) or more -
End Mill (3-Flute General Purpose Short Type) ETS
OSG
General-purpose 3-flute end mill short type using cobalt high-speed steel as the base material.
Standard Price: SGD 31.95- Days to Ship: 4 Day(s) or more -
3S End Mill, 4-Flute Long Blade
FUKUDA
Long blade for cutting such as deep grooving and wide widths Repolishing is easy
Standard Price: SGD 39.01- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model
MISUMI
[Features]
·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Standard Price: SGD 27.85- Days to Ship: 4 Day(s) or more -
High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
MISUMI
[Features]
·High-speed steel uncoated square short flute length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Standard Price: SGD 14.64- Days to Ship: Same day or more -
2-flute, General-purpose, Short Type EDS
OSG
High-speed steel square series.
Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
Coating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Helix angle: Standard helix (30 to 44°)Standard Price: SGD 26.71- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 36.08- Days to Ship: Same day or more -
2-flute, General-purpose, Long Type EDL
OSG
General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Standard Price: SGD 31.11- Days to Ship: 4 Day(s) or more -
End Mill (Multi-Flute Long Shank Long Type) LS-EML
OSG
General-purpose 4-flute long shank end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Standard Price: SGD 54.37- Days to Ship: 4 Day(s) or more -
TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS
OSG
[Features]
· Adopts TiN coating with excellent weld resistance and abrasion resistance.
· Those with outer diameter of 41 mm or more have center holes.Standard Price: SGD 39.53- Days to Ship: 4 Day(s) or more -
Special Long Shank End Mill, 4-Flute
FUKUDA
The shank has been made especially long for deep engraving. Designed with a thin shank.
Standard Price: SGD 61.23- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular
MISUMI
[Features]
·High speed steel powder roughing regular flute length 4-flute type that can expect for durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
Standard Price: SGD 22.89- Days to Ship: Same day or more -
High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 2-flute relief shape end mill that can custom dimensions to avoid unwanted tool interference- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
Special Long Shank End Mill, 2-Flute
FUKUDA
The shank has been made especially long for deep engraving. Designed with a thin shank.
Standard Price: SGD 61.34- Days to Ship: 4 Day(s) or more -
High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
[Features]
·High-speed steel uncoated square regular blade length 2-flute type with up to ø50
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Standard Price: SGD 15.49- Days to Ship: Same day or more -
High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model
MISUMI
[Features]
·High-speed steel uncoated square long flute length 2-flute type with up to ø50
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Standard Price: SGD 17.63- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
Standard Price: SGD 37.69- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.
Standard Price: SGD 54.35- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.
Standard Price: SGD 107.65- Days to Ship: 4 Day(s) or more -
XPM End Mill (2-Flute Short Type) XPM-EDS
OSG
2-flute end mill short type using powder metal high-speed steel XPM as the base material.
Standard Price: SGD 31.61- Days to Ship: Same day or more -
End Mill For Keyway (Negative Tolerance)
FUKUDA
Endmill dedicated for key groove machining. Negative blade diameter tolerance. A straight shank.
Standard Price: SGD 39.01- Days to Ship: 4 Day(s) or more -
SG-FAX Heavy Extra-Long SGELHV
NACHI(FUJIKOSHI)
Adopts an ultra-long blade length. Capable of roughing of materials from steel to stainless steel and aluminum.
Standard Price: SGD 986.48- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·Demonstrates outstanding durability even during high-speed machining where load on tool is large
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: SGD 51.81- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
Standard Price: SGD 36.17- Days to Ship: Same day or more -
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
·High speed steel powder roughing long flute length type that can expect durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Standard Price: SGD 61.86- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
·Long shank type of high speed steel powder that can expect durability
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 3 Flutes
- S (Short)
Standard Price: SGD 57.62- Days to Ship: 4 Day(s) or more -
High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
MISUMI
[Features]
·High-speed steel roughing uncoated long shank type with pitch width ideal for coarse finishing
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Standard Price: SGD 44.64- Days to Ship: 4 Day(s) or more -
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
·High-speed steel roughing short flute length type with standard TiAlN coating
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- S (Short)
Standard Price: SGD 32.85- Days to Ship: Same day or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short
MISUMI
[Features]
·High helix type with excellent machinability, so it can be used for a wide range of applications from heavy cutting to finish cutting
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: SGD 42.22- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Cutting force is reduced because nicks on peripheral edge divide cutting chips
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: SGD 51.24- Days to Ship: 4 Day(s) or more -
AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short
MISUMI
AS coating with excellent wear resistance achieves the high-precision finish even in prolonged processing
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Standard Price: SGD 34.89- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular
MISUMI
[Features]
·High speed steel powder roughing long flute length 4-flute type that can expect for durability
·Suitable for deep cavity milling
·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
Standard Price: SGD 22.89- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model
MISUMI
[Features]
·High speed steel powder square uncoated short flute length 4-flute type that expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Standard Price: SGD 25.82- Days to Ship: 4 Day(s) or more -
Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type
MISUMI
[Features]
·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Standard Price: SGD 26.65- Days to Ship: 4 Day(s) or more -
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
[Features]
·Uncoated 4-flute long flute length type
·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
·Suitable for deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Standard Price: SGD 21.37- Days to Ship: 4 Day(s) or more -
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model
MISUMI
[Features]
·High-speed steel 2-flute corner chamfer specified end mill with selectable corner chamfer in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 6 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Standard Price: SGD 48.45- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. Suitable for medium finishing.
Standard Price: SGD 55.92- Days to Ship: 4 Day(s) or more -
AG Mill, Roughing, Regular Length Short AGRERS
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.
Standard Price: SGD 74.99- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.
Standard Price: SGD 87.07- Days to Ship: 4 Day(s) or more -
Super Hard, Long 4-Flute SL4SE
NACHI(FUJIKOSHI)
General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.
Standard Price: SGD 35.93- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 38.35- Days to Ship: 4 Day(s) or more -
End Mill (Multi-Flute Center Cut Long Type) CC-EML
OSG
General-purpose 4-flute end mill center cut long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Standard Price: SGD 34.06- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 50.49- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | FUKUDA | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | FUKUDA | MISUMI | MISUMI | FUKUDA | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | FUKUDA | NACHI(FUJIKOSHI) | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG |
| Product Series | Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular | High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model | High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short | AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short | TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular | Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model | Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | |||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
| Blade diameter (D)(φ) | 2.5 ～ 50 | 2.5 ～ 50 | 1 ～ 30 | 3 ～ 50 | 3 ～ 25 | 1 ～ 50 | 0.45 ～ 60 | 0.8 ～ 50 | 0.8 ～ 40 | 10 ～ 40 | 2.5 ～ 50 | 8 ～ 50 | 3 ～ 25 | 8 ～ 25 | 8 ～ 50 | 1 ～ 25 | 3 ～ 40 | 2.5 ～ 50 | 6 ～ 50 | 12 ～ 50 | 0.8 ～ 40 | 3 ～ 30 | 30 ～ 50 | 5 ～ 32 | 6 ～ 32 | 10 ～ 30 | 6 ～ 30 | 6 ～ 30 | 5 ～ 30 | 6 ～ 25 | 6 ～ 20 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 40 | 3 ～ 25 | 1.5 ～ 30 | 3 ～ 50 | 7 ～ 50 | 6 ～ 50 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 |
| Blade length (ℓ)(mm) | 7 ～ 70 | 7 ～ 70 | 2.5 ～ 55 | 20 ～ 125 | 15 ～ 90 | 2.5 ～ 75 | 1.1 ～ 80 | 1.6 ～ 75 | 6 ～ 110 | 45 ～ 110 | 7 ～ 75 | 20 ～ 75 | 12 ～ 68 | - | 20 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 7 ～ 70 | 15 ～ 70 | 55 ～ 140 | 2 ～ 65 | 5 ～ 30 | 150 ～ 300 | 13 ～ 53 | 13 ～ 53 | 45 ～ 90 | 11 ～ 45 | 11 ～ 45 | 13 ～ 45 | 15 ～ 50 | 15 ～ 45 | 8 ～ 45 | 15 ～ 90 | 8 ～ 45 | 12 ～ 68 | 15 ～ 110 | 10 ～ 60 | 3 ～ 55 | 15 ～ 145 | 20 ～ 70 | 26 ～ 150 | 15 ～ 125 | 6 ～ 65 | 15 ～ 110 | 15 ～ 110 |
| Shank diameter (d)(mm) | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 10 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 10 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 12 ～ 42 | 6 ～ 32 | 6 ～ 25 | 32 ～ 42 | 6 ～ 32 | 6 ～ 32 | 10 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 8 ～ 25 | 8 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 10 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 |
| Number of flutes(sheet) | 4 | 4 | 3 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 4 ～ 6 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 4 ～ 6 | 4 ～ 6 | 2 | 2 | 4 ～ 6 | 3 ～ 6 | 3 ～ 6 | 4 ～ 5 | 3 ～ 4 | 3 ～ 4 | 3 ～ 6 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 | 3 | 4 | 4 |
| Overall Length (L)(mm) | 50 ～ 160 | 50 ～ 160 | 45 ～ 125 | 58 ～ 220 | 60 ～ 160 | 45 ～ 165 | 45 ～ 170 | 45 ～ 165 | 50 ～ 195 | 125 ～ 285 | 50 ～ 165 | 100 ～ 350 | 55 ～ 144 | 60 ～ 130 | 100 ～ 350 | 45 ～ 130 | 60 ～ 195 | 50 ～ 160 | 60 ～ 160 | 105 ～ 250 | 50 ～ 165 | 50 ～ 100 | 235 ～ 390 | 57 ～ 133 | 57 ～ 133 | 95 ～ 166 | 80 ～ 160 | 80 ～ 160 | 57 ～ 121 | 65 ～ 140 | 65 ～ 125 | 52 ～ 121 | 60 ～ 160 | 52 ～ 121 | 55 ～ 144 | 60 ～ 195 | 50 ～ 130 | 50 ～ 135 | 60 ～ 230 | 65 ～ 160 | 80 ～ 250 | 60 ～ 210 | 50 ～ 150 | 60 ～ 195 | 60 ～ 195 |
| work material | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Plunging (Z feed) | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Side / Groove | Side / Groove | Plane / Side / Groove / Inclined Cuts | Other | Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Coating | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | TiN | Non-Coated | TiCN | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | AG | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | Non-Coated | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN | TiAlN | TiAlN | TiAlN | Non-Coated | TiN | Non-Coated | TiN |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Square | Square | Square | Square |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Other | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | - | - | - | Available | Available | Available | - | - | - | - | - | Available | Available | Available | Available | Available | Available | - | - | - | - | Available | Available / None | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | - | - | - | - | - | - | - |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Powder high-speed steel | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Alloy HSS | Alloy HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | Straight | - | - | - | Straight | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight | Straight |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
-
Underneck length (ℓ1)(mm)
-
shank
Narrow search by specifying Manufacturer
-
- OSG (76)
- NACHI(FUJIKOSHI) (38)
- FUKUDA (16)
- SANKO MFG (12)
- ASAHI TOOLS (4)
- EIKOSHA (3)
- DAIICHITOOL (1)
- ESCO (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Square HSS End Mills
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?