(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Square End Mills (Carbide)(Torsion Angle (θ):No torsion)

Days to Ship
  • All
  • Same day
  • 2 Day(s) or Less
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

    PCD square end mill PCDSE

      CBN square end mill SSE600

        Micro Grain Carbide Straight Flutes End Mills 2 Flutes for Reforming_MG-STDN

          MIRA BORON CBN brazed End Mills 1 Flute Short_MBOS

            MIRA DIA Sintered Diamond End Mills 1 Flute Short_MDOS

              Ultra-Fine Machining End Mill Micro Edge MSME100

                CBN square end mill SSE400

                  Router for CFRP Cross-flute Router_DIA-DCR

                    SLE2 Slotting End Mill G2

                      SLE2 Long Shank Slotting End Mill G2

                        SLE2 Special Long Shank Slotting End Mill G2

                          Grooving/Shouldering Multi-Flute End Mill for CFRP with Drill Point CR100 6720

                            Grooving/Shouldering Multi-Flute End Mill for CFRP without End Flute CR100 6717

                              Grooving/Shouldering Multi-Flute End Mill for CFRP with End Flute CR100 6719

                                PCD End Mill, 3-Flute 5495

                                  PCD End Mill, 3-Flute Long Shank 5496

                                    PCD End Mill, 5492

                                      PCD End Mill, Long Shank 5493

                                        Straight Tooth End Mill NSL-2

                                          PCD Kirari 2 Flute End Mill PCDE2

                                          Brand

                                          NS TOOL

                                          NS TOOL

                                          OSG

                                          OSG

                                          OSG

                                          NS TOOL

                                          NS TOOL

                                          OSG

                                          ASAHI TOOLS

                                          ASAHI TOOLS

                                          ASAHI TOOLS

                                          GUHRING

                                          GUHRING

                                          GUHRING

                                          GUHRING

                                          GUHRING

                                          GUHRING

                                          GUHRING

                                          NS TOOL

                                          TOYO DRILL

                                          Product Series

                                          PCD square end mill PCDSE

                                          CBN square end mill SSE600

                                          Micro Grain Carbide Straight Flutes End Mills 2 Flutes for Reforming_MG-STDN

                                          MIRA BORON CBN brazed End Mills 1 Flute Short_MBOS

                                          MIRA DIA Sintered Diamond End Mills 1 Flute Short_MDOS

                                          Ultra-Fine Machining End Mill Micro Edge MSME100

                                          CBN square end mill SSE400

                                          Router for CFRP Cross-flute Router_DIA-DCR

                                          SLE2 Slotting End Mill G2

                                          SLE2 Long Shank Slotting End Mill G2

                                          SLE2 Special Long Shank Slotting End Mill G2

                                          Grooving/Shouldering Multi-Flute End Mill for CFRP with Drill Point CR100 6720

                                          Grooving/Shouldering Multi-Flute End Mill for CFRP without End Flute CR100 6717

                                          Grooving/Shouldering Multi-Flute End Mill for CFRP with End Flute CR100 6719

                                          PCD End Mill, 3-Flute 5495

                                          PCD End Mill, 3-Flute Long Shank 5496

                                          PCD End Mill, 5492

                                          PCD End Mill, Long Shank 5493

                                          Straight Tooth End Mill NSL-2

                                          PCD Kirari 2 Flute End Mill PCDE2

                                          Days to Ship 4 Day(s) or more 11 Day(s) 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 11 Day(s) 11 Day(s) 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 7 Day(s) or more 23 Day(s) or more 6 Day(s) or more 6 Day(s) or more 14 Day(s) 14 Day(s) 23 Day(s) or more 23 Day(s) or more 4 Day(s) or more 7 Day(s) or more
                                          Blade diameter (D)(φ)0.1 ~ 10.2 ~ 11 ~ 126 ~ 126 ~ 120.01 ~ 0.050.13.175 ~ 6.353 ~ 503 ~ 305 ~ 304 ~ 164 ~ 164 ~ 1614 ~ 2014 ~ 204 ~ 204 ~ 201 ~ 2.510
                                          Blade length (ℓ)(mm)0.02 ~ 0.20.08 ~ 0.43.5 ~ 303 ~ 67 ~ 130.01 ~ 0.050.0410 ~ 198 ~ 358 ~ 2121---8 ~ 208 ~ 20--2 ~ 1411
                                          Underneck length (ℓ1)(mm)0.1 ~ 10.4 ~ 5-12 ~ 2412 ~ 24-0.2 ~ 0.5-15 ~ 8015 ~ 4115 ~ 41---38 ~ 5238 ~ 52---22
                                          Shank diameter (d)(mm)444 ~ 126 ~ 126 ~ 12443.175 ~ 6.3510 ~ 3210 ~ 32324 ~ 166 ~ 166 ~ 1614 ~ 2014 ~ 206 ~ 206 ~ 20-10
                                          Number of flutes(sheet)2 ~ 6621114-2226 ~ 146 ~ 146 ~ 143322-2
                                          Overall Length (L)(mm)4849 ~ 5345 ~ 8050 ~ 7550 ~ 75455338.1 ~ 63.555 ~ 180100 ~ 220150 ~ 35055 ~ 10857 ~ 10857 ~ 10883 ~ 100100 ~ 15051 ~ 10070 ~ 15055 ~ 6580
                                          work material-general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Cast Iron[○]Aluminum[◎] / Graphite[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]-Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]---Aluminum[◎] / Resin[◎]Aluminum[◎] / Resin[◎]--general steel[○] / Quenched and tempered steel[○]Aluminum[○] / Copper[○]
                                          Torsion Angle (θ)No torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsionNo torsion
                                          Machining ApplicationPlane / Side / GroovePlane / Side / GroovePlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / GroovePlane / Side / Inclined CutsPlane / CountersinkingPlane / CountersinkingPlane / Countersinking-------Plane / Side-
                                          CoatingNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedDia CoatNon-CoatedNon-CoatedNon-CoatedDia CoatDia CoatDia CoatNon-CoatedNon-Coated--Non-CoatedNon-Coated
                                          Blade tip shapeWith LeadWith LeadWith LeadWith LeadWith LeadWith LeadWith LeadWith Lead----------Sharp Edge-
                                          TypeSquareSquareSquareSquareSquareSquareSquareRoughingSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquare

                                          Loading...

                                          1. 1

                                          Related Categories to Square End Mills (Carbide)