Board-To-Board Connectors（Connector Shape：Square shape）

• 

  3M^TM Standard Socket / Header Socket Connector 79XX Series

  3M

  The socket connectors also support wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  
  [Features]
  Compatible with various headers and plug connectors for standard sockets/headers.
  ▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
  ▪ Also supports wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  · Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
  · A film-type pull tab can be attached (J3490-X).
  ▪ Accessory key prevents incorrect insertion between the same number of pins (J3435-0000).
  
  *Note: Strain relief sold separately. (Model: 3448-79**) **...Number of Pins.

  • Volume Discount

  Standard Price:	SGD 2.16-
  Days to Ship:	Same day or more

• 

  3M^TM Standard Socket/Header, V Low-Profile Header, Straight Type

  3M

  [Features]
  · A V-type, low-profile, straight header is available in 12 varieties of pin combinations from 10 to 64 poles.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Board-to-board connection is feasible when combined with a board mount socket.

  Standard Price:	SGD 2.68-
  Days to Ship:	3 Day(s) or more

• 

  DIN Connector (Cable Connection Type) - XC6

  OMRON

  Connectors with cables attached for a wide range of applications than standard DIN connectors.
  [Features]
  ・ There are 2 types of connectors for connecting ribbon cables and discrete wires, which can be selected according to the application
  ・ VME bus configuration (daisy chain) and back plane configuration are possible using ribbon cable connector
  ・ The discrete wire connection connector uses IDC contact and split contact blocks, greatly reducing harness labor-hours
  [Applications]
  ・ For PCBs of communication equipment, office equipment, test and measuring instrument, disaster and crime prevention equipment, security equipment, etc.

  Standard Price:	SGD 24.91
  Days to Ship:	4 Day(s) or more

• 

  FI Series

  JAPANAVIATION

  [Features]
  · Connector for connecting cables to boards with a 1.25-mm pitch for circuit connections inside equipment.
  ・The single-row model is suitable for thinner devices. The 2-row model (staggered array) is suitable for high-density mounting.
  ・The circuit board side receptacle is a small, low-profile SMT with a mounting height of 1.8 mm (1-row type) and 3.7 mm (2-row type).
  ・SMT connection: 1-row type – 1.25-mm pitch; 2-row type – 0.625-mm pitch.
  ・The receptacle prevents the connector from floating during soldering and is equipped with a hold-down to strengthen the retaining force on the connector's circuit board.
  ・The cable-side plug has a uniform finish and superior workability for discrete wire crimped-type connectors.
  ・Includes a reverse-insertion prevention key.
  ・This is a friction-lock type.
  · The receptacles can be supplied with embossed taping to support automatic mounting.

  • Volume Discount

  Standard Price:	SGD 1.34-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Click-Plug Connector, 42XX Series

  3M

  A click-plug connector that connects 1.27-mm pitch flat cables via pressure weld contacts—compatible with daisy chains.
  
  [Features]
  ▪ Available in 9 type of pin combinations from 10 pins to 60 pins.
  · Connects 1.27-mm pitch flat cables via pressure contact—compatible with daisy chains.
  · The ejector latch that simplifies the securing and removal of the socket connector is included.
  · Products with mounting flanges for panel mounting are available.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.

  Standard Price:	SGD 10.33-
  Days to Ship:	3 Day(s) or more

• 

  LY Series

  JAPANAVIATION

  [Features]
  These are connectors for high reliability PCBs that are utilized in combination with socket housings for box type pin headers and cables that are strongly resistant to connector drop and twisting.

  • Volume Discount

  Standard Price:	SGD 0.36-
  Days to Ship:	3 Day(s) or more

• 

  Crimped Original Type, PS Series

  JAPANAVIATION

  [Features]
  ・The socket contacts are crimped to discrete wires and then it is inserted into the socket housing.
  ・This is a board-to-wire connector used in combination with pin headers.

  • Volume Discount

  Standard Price:	SGD 0.95-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Box Header, Straight Type

  3M

  · A straight box header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 11 varieties of pin combinations from 10 pins to 64 pins.
  · Ejector latch that simplifies securing and removal of the socket connector included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering or while inserting or extracting.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 2.42-
  Days to Ship:	3 Day(s) or more

• 

  IL-G Series

  JAPANAVIATION

  · These are two-piece type connectors for circuit board-to-wire connections used for configuring pin headers and socket housings.
  
  [Features]
  · The wires are uniformly finished, crimped type for excellent workability and are completed for semi-automatic crimping machines, mass volume wiring connections, and manual crimping tools.
  · Secure coupling is made possible due a combined pin header wall surface guide groove and a socket housing key, providing an incorrect coupling/reverse-insertion prevention structure.
  · These lock lightly by the interlocking protrusions on both sides of the pin header and socket housing.
  · The terminal section of the housing has a step to which the finger tips can be applied, making it easy to extract despite its small size.

  Standard Price:	SGD 0.28-
  Days to Ship:	Same day or more

• 

  3M^TM Standard Socket/Header, Board Mounting Socket, 85XX Series

  3M

  This is the socket connector 85XX series implemented between circuit boards in a parallel connection and conforming to the low profile header and V low profile header.
  
  [Features]
  · Compatible with low-profile/very low-profile headers for implementing parallel connections at board intervals of 18.3-mm and 14.0-mm respectively.
  ▪ Available in 10 varieties of pin combinations from 10 pins to 64 pins.
  · Kink machining tail portion that takes soldering work into account.
  ▪ The accessory key can prevent incorrect insertion between the same number of pins.

  Standard Price:	SGD 4.89-
  Days to Ship:	4 Day(s) or more

• 

  3M^TM Standard Socket/Header, Box Header, Right-Angle Type

  3M

  · A right-angle box header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 11 varieties of pin combinations from 10 pins to 64 pins.
  · Ejector latch that simplifies securing and removal of the socket connector included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering or while inserting or extracting.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 2.39-
  Days to Ship:	3 Day(s) or more

• 

  Original Plug - XG8

  OMRON

  A generic general purpose plug compatible with a wide range of applications.
  [Features]
  ・ It can be widely used as a plug for various socket mating
  ・ Compatible with through hole ø0.8
  ・ The 2-row type L-shaped terminal plug uses a block-type base to improve workability during soldering, and can be easily locked using a simple lock lever (Except for type XG8V and type XG8W straight)
  ・ Polarization cut is possible (Type XG8W, excluding L type)
  ・ UL standard (file No. E103202) certified product is standard product
  [Applications]
  ・ Ideal as an intermediate plug between connectors

  Standard Price:	SGD 0.19-
  Days to Ship:	Same day or more

• 

  TX24/TX25 Series

  JAPANAVIATION

  With an internal machine board-to-board connector, circuit boards can be connected horizontally, parallel, or perpendicularly by joining the receptacle (TX24) and plug (TX25).
  
  [Features]
  · A receptacle and plug along with a straight through-hole type and right angle thorough-hole type are available.
  · Ribbon-type (flat) contacts are used with a long contact stroke, excellent contact reliability/stability, and resistance to prying once mated.
  · The straight through-hole type offers 3 insulator heights and a parallel circuit board gap of 12 to 24 mm (2-m gap).
  ・Both receptacle (TX24) mating sides have an insulator mating guide, which excels at strong insertion, and is perfect for lock & panel mountings.
  ・This type has a satisfying ‘click' action when inserting and extracting.
  ・Hook pin and hook-less types are available to temporarily hold the circuit board while soldering and also prevent the solder from oozing.
  ・The contact terminal allows for simple circuit board pattern design with a 1.27-mm pitch and 1.905-mm array gap with a 4-row staggered arrangement.

  • Volume Discount

  Standard Price:	SGD 1.54-
  Days to Ship:	3 Day(s) or more

• 

  IL-Y Series

  JAPANAVIATION

  [Features]
  These connectors are for circuit board-to-wire connections for low-profile, thin design with a contact pitch of 1.5 mm (single-row), a mounting height of 6.3 mm, and a thickness of 3.5 mm.

  Standard Price:	SGD 0.18-
  Days to Ship:	3 Day(s) or more

• 

  Two-Row PCB Connector for 3M^TM 1.27-mm Pitch Flat Cable

  3M

  This is a 2-row type connector with a 2.54-mm row structure.
  
  [Features]
  ▪ Reduces the number of parts by directly soldering to PCBs.
  ▪ Wiring by pressure contact with a 1.27-mm pitch flat cable.
  · A 2.54-mm grid hole pattern with the same arrangement as a standard socket/header.
  ▪ Available in 11 varieties of pin combinations from 10 to 64 pins.

  Standard Price:	SGD 3.87-
  Days to Ship:	3 Day(s) or more

• 

  DIN Connector (Twin Contact Type) - XC5 (DIN Standard)

  OMRON

  Greatly expanded the variation of international standard DIN connectors.
  [Features]
  ・ The manufacturer is trying to expand the number of positions while taking advantage of the advantages of DIN connectors
  ・ Wide variations correspond to various applications in the industry
  ・ Compatible with the international needs from one-piece connectors (card edges) to two-piece connectors
  ・ Achieves low price while maintaining high reliability by adopting twin contact method
  ・ Achieves low insertion force that has resulted from FEM analysis
  ・ UL standard (file No. E103202), CSA standard (file No. LR62678) certified products are standard products
  [Applications]
  ・ It can be used as a board-to-board connector

  Standard Price:	SGD 2.62-
  Days to Ship:	Same day or more

• 

  Flat Cable Connector (PCB Type), XG2

  OMRON

  [Features]
  · Total cost reduction is achieved by high-density mounting and low-power wire connections.
  · The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
  · Can be dip-soldered directly to a PCB.
  · The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
  · Uses a 2.54 mm grid terminal array.
  · PCB pattern design is easy.
  · Two types of terminal arrays: standard and inverse.
  · Uses insulating materials complying with UL standards (UL94V-0).
  · Pressure-welding tool uses attachment that supports all poles.
  · Saves time and work connecting wires.

  Standard Price:	SGD 1.77-
  Days to Ship:	Same day or more

• 

  Shorting Connectors - XJ8/XG8S/XG8T

  OMRON

  [Features]
  · A low-profile, economical connector that is used for circuit switching.
  · Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
  · These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
  · Available in a lineup of one to three rows.
  · Compatible with through hole diameters of ⌀0.8.
  · An easy-to-insert, difficult-to-remove structure.
  · A 2-point contact structure with high contact reliability.
  · The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
  · UL Standard (File NO E103202).
  · Certified products are used as standard (XJ8 type).

  Standard Price:	SGD 0.09-
  Days to Ship:	Same day or more

• 

  FI-R Series

  JAPANAVIATION

  A connector for use with 0.5-mm pitch transmission terminals inside digital equipment.
  
  [Features]
  · Terminal: 0.05 mm
  · Connector height: 3.0 mm
  Compact design supporting 21, 31, 41, 51 core.
  · Excellent mating performance due to a large mating guide on the plug side.
  · Excellent circuit board retention strength with fixed soldered parts also on the mating side of the circuit board.
  · The differential impedance characteristics are matched to 100 Ω.
  · In addition, the ground has been reinforced by modifying the structure of the shell and hold-down.
  · A right angle type and a straight type are both available for the circuit board and can be freely selected and used with different circuit board patterns.
  · Mechanical lock prevents unsuccessful fitting and disconnection.
  · Cable type can be selected to match the desired application, including crimped discrete, soldered thin coaxial cable, FCC type, etc.
  · Utilized in VESA standard connectors for LCD interfaces used in LCD TVs.

  Standard Price:	SGD 3.53-
  Days to Ship:	3 Day(s) or more

• 

  PS Series, MIL Type

  JAPANAVIATION

  [Features]
  · An insulation displacement connector that makes board-to-flat ribbon cable (FRC) connections easy.

  • Volume Discount

  Standard Price:	SGD 2.30-
  Days to Ship:	3 Day(s) or more

• 

  PS-LA Series

  JAPANAVIATION

  [Features]
  · A small, low-profile PS Series connector — mounting height: 9.5 mm, contact pitch: 2.54 mm.
  · The combination of a crimped socket and a box-style pin header (straight/angled) makes this connector strongly resistant against connector collapse and prying. This connector is optimally suited for mounting high-density, board-to-wire connections.
  · A highly reliable type for obtaining a secure, stable connection. The structure prevents incorrect insertion and is strongly resistant to vibration and pulling. The socket contacts are a 2-point contact configuration, which utilize spring characteristics.

  • Volume Discount

  Standard Price:	SGD 0.95-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket / Header Right-Angle Board Mounting Socket

  3M

  This mounting socket supports the implementation of either parallel or vertical connections conforming to a low profile or very low-profile headers.
  
  [Features]
  · Supports implementation of either parallel or vertical connections conforming to a low profile or very low-profile headers.
  ▪ Available in 8 varieties of pin combinations from 20 to 64 pins.
  · Equipped with a mounting flange that effectively alleviates stress on through holes during temporary mounting for soldering or while performing insertion or extraction.
  ▪ The accessory key can prevent incorrect insertion between the same number of pins (J3435-0000).

  Standard Price:	SGD 15.40-
  Days to Ship:	5 Day(s) or more

• 

  IC Socket - XR2

  OMRON

  Achieves high reliability such as resistance to momentary interruptions. Ideal for high-speed data processing circuits.
  [Features]
  ・ The contact is a round pin type and has good retention due to 4-point contact, and has excellent vibration and impact resistance
  ・ Large contact insertion slot for easy insertion
  ・ High contact position with IC lead ensures excellent contact
  ・ Excellent flux resistance
  ・ Wide selection of open frame, closed frame, single row type, dip terminal, wrapping terminal, low pro dip terminal
  ・ Gold flush plated products are also available in a series. The ideal choice can be selected according to the application
  ・ UL standard (file No. E103202) certified product is standard product
  [Applications]
  ・ It can be used in places such as where heat resistance is high and tends to get hot when inserting and removing frequently

  Standard Price:	SGD 1.21-
  Days to Ship:	Same day or more

• 

  NF Series, Ribbon Cable Connection / Board-to-Board Connector

  YAMAICHI

  [Features]
  ・ 1.27 mm contact pitch connector ideal for high density mounting
  ・ The mounting area can be reduced by about 40% compared to the conventional 2.54 mm pitch connector (For 64 contacts)
  ・ Product variations include cable connection type, board-to-board connection type, etc.
  ・ The cable batch IDC type enables batch IDC of 0.635 mm pitch ribbon cables with a unique 3-fork contact

  Standard Price:	SGD 20.58
  Days to Ship:	4 Day(s) or more

• 

  PS Series Board-to-Board Connection Socket Receptacle

  JAPANAVIATION

  [Features]
  · A socket receptacle that can be combined with original pin headers for vertical or balanced board-to-board connections.
  · The socket contacts are pre-installed inside the socket receptacle housing for soldering onto the board via the through hole.
  · Straight and triangle types are available for parallel or vertical connections between boards in combination with the partner pin headers.
  · Open and box-style pin headers are available.

  • Volume Discount

  Standard Price:	SGD 2.45-
  Days to Ship:	3 Day(s) or more

• 

  FI-X Series

  JAPANAVIATION

  [Features]
  · A 1.0 mm-pitch LCD interface connector for high-density mounting.

  Standard Price:	SGD 2.95-
  Days to Ship:	3 Day(s) or more

• 

  IL Series

  JAPANAVIATION

  [Features]
  · An original 2.5-mm pitch Series connector with a track record of various uses in AV equipment and consumer electronics.

  Standard Price:	SGD 0.25-
  Days to Ship:	3 Day(s) or more

• 

  PS Series SEN Type

  JAPANAVIATION

  [Features]
  · A connector for connecting to flat ribbon cables that are used for high-density mountings inside equipment.

  • Volume Discount

  Standard Price:	SGD 2.48-
  Days to Ship:	3 Day(s) or more

• 

  PS Series Direct Board-Attachment Type

  JAPANAVIATION

  Uses the self-piercing method that allows for simultaneous batched pressure-welding connection of all poles without removing the flat ribbon cable insulation.

  • Volume Discount

  Standard Price:	SGD 6.04-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, V Low-Profile Header, Right Angle Type

  3M

  [Features]
  · Right-angle type, very low-profile header, available in 12 types of pin number variations from 10 to 64 pins.
  ▪ A 4-sided mold is used to protect the contacts and prevent reverse insertion of the socket connectors.
  · Board-to-board connection is feasible when combined with a board mount socket.

  Standard Price:	SGD 2.65-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Low-Profile Header, Right-Angle Type

  3M

  · A low-profile, right-angle header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 10 varieties of pin combinations from 10 pins to 60 pins.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Enables board-to-board connections by using in combination with board-mounted sockets.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 6.16
  Days to Ship:	4 Day(s) or more

• 

  3M^TM Standard Socket/Header, Two-Level Header

  3M

  · The unique condominium structure of the two-level header enables space-saving, high-density mounting.
  
  [Features]
  · A unique condominium structure that enables space saving, high-density mounting.
  ▪ Available in 7 varieties of pin combinations from 16 pins to 60 pins.
  · An injector latch that simplifies the securing and removal of the socket connector is included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering/while inserting or extracting.
  · A 4-sided (top) and 3-sided (bottom) mold protects the contacts and prevents reverse insertion of the socket connectors.

  Standard Price:	SGD 15.95
  Days to Ship:	12 Day(s) or more

• 

  Connector for Short Circuit, PS Series

  JAPANAVIATION

  [Features]
  • Shortened socket and pin head allow for printed circuit board circuit exchange without using a switch.
  • Small, lightweight and compact design is optimal for high-density circuit board mounting.
  • Boasts simple handling for good workability. Can be used for its economic value.
  • Sockets are made with highly reliable 2-point internal socket contact construction that gives rise to their springy quality.
  • Pin headers have a groove cut between insulator contacts and can be used when the necessary number of terminals is cut.

  Standard Price:	SGD 1.98-
  Days to Ship:	3 Day(s) or more

• 

  DIN Connector (4-Row, 128-Contact Type) - XC5 (Multi-Contact)

  OMRON

  A multi-pin (4 rows, 128 poles) connector that has been expanded by taking advantage of the concept of DIN.
  [Features]
  ・ The manufacturer is trying to make it multi-pin while taking advantage of the DIN connector
  ・ Two types of plug L-shaped terminals are available: standard DIN type and circuit board mounted DIN style type
  ・ Twin contacts are used for the contact structure to achieve low insertion force and maintain high reliability
  [Applications]
  ・ Mounted on PCBs such as communication equipment, office equipment, test and measuring instrument, disaster prevention and crime prevention equipment, and security equipment
  ・ Used in a wide range of applications

  Standard Price:	SGD 15.78-
  Days to Ship:	Same day or more

• 

  DIN Connector (for Medium and High Electrical Currents) - XC4

  OMRON

  Internationally standardized DIN connector for medium and large currents.
  [Features]
  ・ Compatible with DIN41612
  ・ It can be used for medium/large current and high voltage circuits due to sufficient insulation distance
  ・ It can be mounted in the same rack as type XC5 series
  ・ DIN connector M type (mix type) is also available
  ・ UL standard (file No. E103202) certified product is standard product (Excludes some products)
  [Applications]
  ・ Used in communication equipment, office equipment, test measuring instrument, disaster prevention and security equipment, etc.
  ・ Mounted on PCBs such as security devices and used in a wide range of applications

  Standard Price:	SGD 16.94-
  Days to Ship:	Same day or more

• 

  USB Connector, XM7

  OMRON

  A small USB standard compliant interface connector.
  [Features]
  ・ Compliant with USB 2.0 standard
  mini-USB connector
  ・ Mating cycles 5,000 times
  ・ Lineup of L-shaped terminals and SMT terminals
  USB Connector
  ・ Supports up to 1,500 mating cycles
  ・ Socket A type is mounted on the PC body, USB hub, etc., and Socket B type is mounted on PC peripherals such as printers, scanners, and mice

  Standard Price:	SGD 1.65-
  Days to Ship:	Same day or more

• 

  Half-Pitch Connector (for Board to Board Connections) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  Standard Price:	SGD 1.87-
  Days to Ship:	Same day or more

• 

  TE Connectivity, Connector Housing, Multilock 070 Series

  TE Connectivity

  TE Connectivity, 3.5-mm automotive connector, MULTILOCK 070 series.
  [Features]
  ·Features miniature design for automotive cable-to-cable and cable-to-circuit board applications
  ·The compact design with a high density of 3.5-mm contact core achieved high durability and easy handling
  ·Protects contacts from damage caused by twisting force during mating and disengaging
  ·The housing lance design allows use of lance-less contacts
  ·Using lance-less contacts can prevent pinching and neglect lance deformation
  ·Its biggest feature is the locking mechanism
  ·Equipped with an integrated double lock mechanism on the wire side to firmly hold contacts
  ·Equipped with a locking mechanism consisting of 2 double lock plates, it holds the contacts firmly and prevents halfway insertion
  ·Consists of plugs, receptacle housings, and circuit board header for wire-to-wire and wire-to-circuit board connection applications
  ·Female crimp contacts required for plug housing
  ·Receptacle housing requires male tab contacts
  ·Crimping contacts are sold separately
  ·Compact and durable design, high density (3.5 mm pitch) housing lance design, protects contacts from damage by twisting force, integrated double locking system
  [Applications]
  ·Designed for use with a variety of in-vehicle devices
  ·Main applications include powertrain systems, safety and security systems, conveniences, driver information, body, chassis systems, etc.

  Standard Price:	SGD 1.73
  Days to Ship:	3 Day(s) or more

Loading...