Board-To-Board Connectors（Connection direction：Straight）

• 

  Flat Cable Connector (General Purpose Type) - XG4

  OMRON

  The core of PCB connectors, MIL standard compliant products.
  [Features]
  ・ Achieves high reliability and low price at the same time by adopting a new productivity design
  ・ A box type plug (type XG4C) is also available to help space saving
  ・ A IDC type plug (type XG4E) that can be used as a relay is also available
  ・ Compliant with MIL standard (MIL-C-83503)
  ・ UL standard (file No. E103202) certified product is standard product (Excludes type XG4U and type XG4H)
  [Applications]
  ・ It can be used for various purposes

  Standard Price:	SGD 1.87-
  Days to Ship:	Same day or more

• 

  3M^TM Standard Socket / Header Socket Connector 79XX Series

  3M

  The socket connectors also support wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  
  [Features]
  Compatible with various headers and plug connectors for standard sockets/headers.
  ▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
  ▪ Also supports wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  · Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
  · A film-type pull tab can be attached (J3490-X).
  ▪ Accessory key prevents incorrect insertion between the same number of pins (J3435-0000).
  
  *Note: Strain relief sold separately. (Model: 3448-79**) **...Number of Pins.

  • Volume Discount

  Standard Price:	SGD 2.16-
  Days to Ship:	Same day or more

• 

  3M^TM Standard Socket/Header, V Low-Profile Header, Straight Type

  3M

  [Features]
  · A V-type, low-profile, straight header is available in 12 varieties of pin combinations from 10 to 64 poles.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Board-to-board connection is feasible when combined with a board mount socket.

  Standard Price:	SGD 2.68-
  Days to Ship:	3 Day(s) or more

• 

  1.25 mm Pitch, For FFC/FPC, ZIF, Straight Type 5597-NCPB

  MOLEX

  [Features]
  There are a variety of Molex connectors available for both FFC (flat flexible cables) and FPC (flexible printed circuit boards). (1.25mm pitch, ZIF, straight type)

  Standard Price:	SGD 1.17-
  Days to Ship:	3 Day(s) or more

• 

  DIN Standard Compliant, Board-To-Board Connector, PCN12 Series

  HIROSE ELECTRIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  Standard Price:	SGD 2.91-
  Days to Ship:	3 Day(s) or more

• 

  Back Connectors NX Series for I/O Cards

  HIROSE ELECTRIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  Standard Price:	SGD 8.54
  Days to Ship:	4 Day(s) or more

• 

  LY Series

  JAPANAVIATION

  [Features]
  These are connectors for high reliability PCBs that are utilized in combination with socket housings for box type pin headers and cables that are strongly resistant to connector drop and twisting.

  • Volume Discount

  Standard Price:	SGD 0.36-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Click-Plug Connector, 42XX Series

  3M

  A click-plug connector that connects 1.27-mm pitch flat cables via pressure weld contacts—compatible with daisy chains.
  
  [Features]
  ▪ Available in 9 type of pin combinations from 10 pins to 60 pins.
  · Connects 1.27-mm pitch flat cables via pressure contact—compatible with daisy chains.
  · The ejector latch that simplifies the securing and removal of the socket connector is included.
  · Products with mounting flanges for panel mounting are available.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.

  Standard Price:	SGD 10.33-
  Days to Ship:	3 Day(s) or more

• 

  FFC-FPC (Through-hole) (52806) Straight Type

  MOLEX

  [Features]
  • FFC (multi-conductor cable) and various connectors for FPC (flexible printed circuit boards) (1.0-mm pitch NONZIF straight type (2)).

  Standard Price:	SGD 0.65-
  Days to Ship:	3 Day(s) or more

• 

  Stacking Height 5 mm to 11 mm Compatible Half Pitch Stacking Connector, FX4 Series

  HIROSE ELECTRIC

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  Standard Price:	SGD 3.20-
  Days to Ship:	3 Day(s) or more

• 

  2.54mm Pitch Bottom Entry Type Connector, MDF7 Series

  HIROSE ELECTRIC

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  Standard Price:	SGD 0.95-
  Days to Ship:	3 Day(s) or more

• 

  2.54-mm Pitch Pin Header (Single-Row Terminal Type), A2 Series

  HIROSE ELECTRIC

  2.54 mm pitch pin header terminal 1 row type.
  [Features]
  ·High density mounting: When the connectors are arranged in the length direction, they can be arranged without wasting space on the 2.54 mm mesh circuit board
  ·Variations of the number of positions: 20 types of A2 series are available from 1 position to 20 positions
  [Applications]
  ·Computers, FDDs, VTRs and other electronic devices

  Standard Price:	SGD 1.23-
  Days to Ship:	3 Day(s) or more

• 

  FI Series

  JAPANAVIATION

  [Features]
  · Connector for connecting cables to boards with a 1.25-mm pitch for circuit connections inside equipment.
  ・The single-row model is suitable for thinner devices. The 2-row model (staggered array) is suitable for high-density mounting.
  ・The circuit board side receptacle is a small, low-profile SMT with a mounting height of 1.8 mm (1-row type) and 3.7 mm (2-row type).
  ・SMT connection: 1-row type – 1.25-mm pitch; 2-row type – 0.625-mm pitch.
  ・The receptacle prevents the connector from floating during soldering and is equipped with a hold-down to strengthen the retaining force on the connector's circuit board.
  ・The cable-side plug has a uniform finish and superior workability for discrete wire crimped-type connectors.
  ・Includes a reverse-insertion prevention key.
  ・This is a friction-lock type.
  · The receptacles can be supplied with embossed taping to support automatic mounting.

  • Volume Discount

  Standard Price:	SGD 1.34-
  Days to Ship:	3 Day(s) or more

• 

  Crimped Original Type, PS Series

  JAPANAVIATION

  [Features]
  ・The socket contacts are crimped to discrete wires and then it is inserted into the socket housing.
  ・This is a board-to-wire connector used in combination with pin headers.

  • Volume Discount

  Standard Price:	SGD 0.95-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Box Header, Straight Type

  3M

  · A straight box header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 11 varieties of pin combinations from 10 pins to 64 pins.
  · Ejector latch that simplifies securing and removal of the socket connector included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering or while inserting or extracting.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 2.42-
  Days to Ship:	3 Day(s) or more

• 

  DIC Series

  HONDA TSUSHIN KOGYO

  2.54 mm pitch connector used for circuit switching and the like.
  
  [Features]
  • Many varieties available for combination with the FCC and HKP series.
  • Plating thickness is selectable according to cost requirements.
  • Insulator is UL-certified.
  • These connectors also come in 2, 3 and 4-series versions.

  Standard Price:	SGD 0.72-
  Days to Ship:	3 Day(s) or more

• 

  2.54-mm Pitch Pin Header (Double-Row Terminal Type), A1 Series

  HIROSE ELECTRIC

  2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

  Standard Price:	SGD 1.33-
  Days to Ship:	3 Day(s) or more

• 

  IL-G Series

  JAPANAVIATION

  · These are two-piece type connectors for circuit board-to-wire connections used for configuring pin headers and socket housings.
  
  [Features]
  · The wires are uniformly finished, crimped type for excellent workability and are completed for semi-automatic crimping machines, mass volume wiring connections, and manual crimping tools.
  · Secure coupling is made possible due a combined pin header wall surface guide groove and a socket housing key, providing an incorrect coupling/reverse-insertion prevention structure.
  · These lock lightly by the interlocking protrusions on both sides of the pin header and socket housing.
  · The terminal section of the housing has a step to which the finger tips can be applied, making it easy to extract despite its small size.

  Standard Price:	SGD 0.28-
  Days to Ship:	Same day or more

• 

  3M^TM Standard Socket/Header, Board Mounting Socket, 85XX Series

  3M

  This is the socket connector 85XX series implemented between circuit boards in a parallel connection and conforming to the low profile header and V low profile header.
  
  [Features]
  · Compatible with low-profile/very low-profile headers for implementing parallel connections at board intervals of 18.3-mm and 14.0-mm respectively.
  ▪ Available in 10 varieties of pin combinations from 10 pins to 64 pins.
  · Kink machining tail portion that takes soldering work into account.
  ▪ The accessory key can prevent incorrect insertion between the same number of pins.

  Standard Price:	SGD 4.89-
  Days to Ship:	4 Day(s) or more

• 

  Original Plug - XG8

  OMRON

  A generic general purpose plug compatible with a wide range of applications.
  [Features]
  ・ It can be widely used as a plug for various socket mating
  ・ Compatible with through hole ø0.8
  ・ The 2-row type L-shaped terminal plug uses a block-type base to improve workability during soldering, and can be easily locked using a simple lock lever (Except for type XG8V and type XG8W straight)
  ・ Polarization cut is possible (Type XG8W, excluding L type)
  ・ UL standard (file No. E103202) certified product is standard product
  [Applications]
  ・ Ideal as an intermediate plug between connectors

  Standard Price:	SGD 0.19-
  Days to Ship:	Same day or more

• 

  High Speed Transmission, 0.8 mm Pitch, Connector For Board-to-Board Connection, FX18 Series

  HIROSE ELECTRIC

  0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.

  Standard Price:	SGD 5.18-
  Days to Ship:	3 Day(s) or more

• 

  BLZF, 3.5 Series

  WEIDMULLER

  [Features]
  · 3.50 mm pitch spring connection.

  Standard Price:	SGD 2.36-
  Days to Ship:	3 Day(s) or more

• 

  FFC Series

  HONDA TSUSHIN KOGYO

  Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
  
  [Features]
  • The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
  • Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
  • Can be used, in combination with the DIC series, as circuit-switching terminal plates.
  • Can select the number of contacts required.
  • Many pin lengths are available, so the user can select the appropriate length for a given.
  • Select the surface required: gold, tin, or copper.
  • Molds come in two colors (black and red).
  • Remover pin prevents backwards insertion.

  Standard Price:	SGD 0.47-
  Days to Ship:	3 Day(s) or more

• 

  PCN10 Series (DIN Standard-Compliant: Dip Wrapping Type)

  HIROSE ELECTRIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  Standard Price:	SGD 3.21-
  Days to Ship:	3 Day(s) or more

• 

  Circuit Board-to-Cable Connector (in Equipment), KX14/KX15 Series

  JAPANAVIATION

  A two-piece type, board-to-board connector for use inside increasingly high-functionality, smaller, lighter AV devices, networking devices, and other advanced electronics.
  
  [Features]
  · Compatible with parallel board intervals of 4–9-mm (1-mm each).
  · Two, straight-type, insulator heights are available for KX14 (receptacle), and three for KX15 (plug).
  · When installing parallel boards, the board interval dimensions can be selected between 4–9-mm (1-mm each) by using different receptacle and plug combinations.

  • Volume Discount

  Standard Price:	SGD 3.60-
  Days to Ship:	3 Day(s) or more

• 

  TX24/TX25 Series

  JAPANAVIATION

  With an internal machine board-to-board connector, circuit boards can be connected horizontally, parallel, or perpendicularly by joining the receptacle (TX24) and plug (TX25).
  
  [Features]
  · A receptacle and plug along with a straight through-hole type and right angle thorough-hole type are available.
  · Ribbon-type (flat) contacts are used with a long contact stroke, excellent contact reliability/stability, and resistance to prying once mated.
  · The straight through-hole type offers 3 insulator heights and a parallel circuit board gap of 12 to 24 mm (2-m gap).
  ・Both receptacle (TX24) mating sides have an insulator mating guide, which excels at strong insertion, and is perfect for lock & panel mountings.
  ・This type has a satisfying ‘click' action when inserting and extracting.
  ・Hook pin and hook-less types are available to temporarily hold the circuit board while soldering and also prevent the solder from oozing.
  ・The contact terminal allows for simple circuit board pattern design with a 1.27-mm pitch and 1.905-mm array gap with a 4-row staggered arrangement.

  • Volume Discount

  Standard Price:	SGD 1.54-
  Days to Ship:	3 Day(s) or more

• 

  IL-Y Series

  JAPANAVIATION

  [Features]
  These connectors are for circuit board-to-wire connections for low-profile, thin design with a contact pitch of 1.5 mm (single-row), a mounting height of 6.3 mm, and a thickness of 3.5 mm.

  Standard Price:	SGD 0.18-
  Days to Ship:	3 Day(s) or more

• 

  Two-Row PCB Connector for 3M^TM 1.27-mm Pitch Flat Cable

  3M

  This is a 2-row type connector with a 2.54-mm row structure.
  
  [Features]
  ▪ Reduces the number of parts by directly soldering to PCBs.
  ▪ Wiring by pressure contact with a 1.27-mm pitch flat cable.
  · A 2.54-mm grid hole pattern with the same arrangement as a standard socket/header.
  ▪ Available in 11 varieties of pin combinations from 10 to 64 pins.

  Standard Price:	SGD 3.87-
  Days to Ship:	3 Day(s) or more

• 

  DIN Connector (Twin Contact Type) - XC5 (DIN Standard)

  OMRON

  Greatly expanded the variation of international standard DIN connectors.
  [Features]
  ・ The manufacturer is trying to expand the number of positions while taking advantage of the advantages of DIN connectors
  ・ Wide variations correspond to various applications in the industry
  ・ Compatible with the international needs from one-piece connectors (card edges) to two-piece connectors
  ・ Achieves low price while maintaining high reliability by adopting twin contact method
  ・ Achieves low insertion force that has resulted from FEM analysis
  ・ UL standard (file No. E103202), CSA standard (file No. LR62678) certified products are standard products
  [Applications]
  ・ It can be used as a board-to-board connector

  Standard Price:	SGD 2.62-
  Days to Ship:	Same day or more

• 

  DIN Style Connector (Twin Contact Type) - XC5 (DIN Style)

  OMRON

  A DIN style board-to-board connector built to further expand on the DIN concept.
  [Features]
  ・ DIN standard connector can be mated
  ・ Ideal for automatic solder mounting because it is a circuit board mounted style
  ・ DIN style 1 adopts the same mounting dimensions as DIN
  ・ DIN style 2 further expands the mounting dimensions and realizes a comfortable mounting
  ・ UL standard (file No. E103202), CSA standard (file No. LR62678) certified products are standard products (Type XC5K is excluded)
  [Applications]
  ・ Communication equipment, office equipment, test and measuring instrument, disaster prevention and crime prevention equipment, security equipment, etc.
  ・ Mounted on a PCB and used in a wide range of applications

  Standard Price:	SGD 2.53-
  Days to Ship:	Same day or more

• 

  HM Connector (2-mm Pitch, Hard Metric Connectors) - XC8/XC9

  OMRON

  2.0-mm pitch board-to-board connector compliant with CompactPCI, the PCI bus standard for industrial computers.
  [Features]
  ・ Compliant with IEC61076-4-101
  ・ Compatible with 3U and 6U Eurocard packages
  ・ Socket contact is a highly reliable double-sided contact method
  ・ UL standard (file No. E103202) certified product as standard product (Excludes some products)
  [Applications]
  ・ For PCBs of communication equipment, office equipment, test and measuring instrument, disaster and crime prevention equipment, security equipment, etc.

  Standard Price:	SGD 25.03-
  Days to Ship:	4 Day(s) or more

• 

  Flat Cable Connector (PCB Type), XG2

  OMRON

  [Features]
  · Total cost reduction is achieved by high-density mounting and low-power wire connections.
  · The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
  · Can be dip-soldered directly to a PCB.
  · The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
  · Uses a 2.54 mm grid terminal array.
  · PCB pattern design is easy.
  · Two types of terminal arrays: standard and inverse.
  · Uses insulating materials complying with UL standards (UL94V-0).
  · Pressure-welding tool uses attachment that supports all poles.
  · Saves time and work connecting wires.

  Standard Price:	SGD 1.77-
  Days to Ship:	Same day or more

• 

  Shorting Connectors - XJ8/XG8S/XG8T

  OMRON

  [Features]
  · A low-profile, economical connector that is used for circuit switching.
  · Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
  · These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
  · Available in a lineup of one to three rows.
  · Compatible with through hole diameters of ⌀0.8.
  · An easy-to-insert, difficult-to-remove structure.
  · A 2-point contact structure with high contact reliability.
  · The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
  · UL Standard (File NO E103202).
  · Certified products are used as standard (XJ8 type).

  Standard Price:	SGD 0.09-
  Days to Ship:	Same day or more

• 

  NF Series, Ribbon Cable Connection / Board-to-Board Connector

  YAMAICHI

  [Features]
  ・ 1.27 mm contact pitch connector ideal for high density mounting
  ・ The mounting area can be reduced by about 40% compared to the conventional 2.54 mm pitch connector (For 64 contacts)
  ・ Product variations include cable connection type, board-to-board connection type, etc.
  ・ The cable batch IDC type enables batch IDC of 0.635 mm pitch ribbon cables with a unique 3-fork contact

  Standard Price:	SGD 20.58
  Days to Ship:	4 Day(s) or more

• 

  High Speed Transmission Compatible Connector for 0.5 mm Pitch Board-to-Board 4 to 5 mm Connection, FX10 Series

  HIROSE ELECTRIC

  [Features]
  · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
  Some in-stock items are custom products, therefore returns and cancellations are not possible.

  Standard Price:	SGD 4.32-
  Days to Ship:	3 Day(s) or more

• 

  Stacking Heigh 5 to 9 mm Compatible, 0.8 mm Pitch Connector, FX6 Series

  HIROSE ELECTRIC

  The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
  
  [Features]
  · Compatible with 5 mm to 9 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
  · Long effective mating length of 1.7 mm.
  · A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
  · Fit guiding.
  · A ±1 mm self alignment and large guiding volume makes for easy mating.
  · Supports automatic mounting.
  ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

  • Volume Discount

  Standard Price:	SGD 2.19-
  Days to Ship:	3 Day(s) or more

• 

  FI-R Series

  JAPANAVIATION

  A connector for use with 0.5-mm pitch transmission terminals inside digital equipment.
  
  [Features]
  · Terminal: 0.05 mm
  · Connector height: 3.0 mm
  Compact design supporting 21, 31, 41, 51 core.
  · Excellent mating performance due to a large mating guide on the plug side.
  · Excellent circuit board retention strength with fixed soldered parts also on the mating side of the circuit board.
  · The differential impedance characteristics are matched to 100 Ω.
  · In addition, the ground has been reinforced by modifying the structure of the shell and hold-down.
  · A right angle type and a straight type are both available for the circuit board and can be freely selected and used with different circuit board patterns.
  · Mechanical lock prevents unsuccessful fitting and disconnection.
  · Cable type can be selected to match the desired application, including crimped discrete, soldered thin coaxial cable, FCC type, etc.
  · Utilized in VESA standard connectors for LCD interfaces used in LCD TVs.

  Standard Price:	SGD 3.53-
  Days to Ship:	3 Day(s) or more

• 

  IL Series

  JAPANAVIATION

  [Features]
  · An original 2.5-mm pitch Series connector with a track record of various uses in AV equipment and consumer electronics.

  Standard Price:	SGD 0.25-
  Days to Ship:	3 Day(s) or more

• 

  PS Series, MIL Type

  JAPANAVIATION

  [Features]
  · An insulation displacement connector that makes board-to-flat ribbon cable (FRC) connections easy.

  • Volume Discount

  Standard Price:	SGD 2.30-
  Days to Ship:	3 Day(s) or more

• 

  PS-LA Series

  JAPANAVIATION

  [Features]
  · A small, low-profile PS Series connector — mounting height: 9.5 mm, contact pitch: 2.54 mm.
  · The combination of a crimped socket and a box-style pin header (straight/angled) makes this connector strongly resistant against connector collapse and prying. This connector is optimally suited for mounting high-density, board-to-wire connections.
  · A highly reliable type for obtaining a secure, stable connection. The structure prevents incorrect insertion and is strongly resistant to vibration and pulling. The socket contacts are a 2-point contact configuration, which utilize spring characteristics.

  • Volume Discount

  Standard Price:	SGD 0.95-
  Days to Ship:	3 Day(s) or more

• 

  IC Socket - XR2

  OMRON

  Achieves high reliability such as resistance to momentary interruptions. Ideal for high-speed data processing circuits.
  [Features]
  ・ The contact is a round pin type and has good retention due to 4-point contact, and has excellent vibration and impact resistance
  ・ Large contact insertion slot for easy insertion
  ・ High contact position with IC lead ensures excellent contact
  ・ Excellent flux resistance
  ・ Wide selection of open frame, closed frame, single row type, dip terminal, wrapping terminal, low pro dip terminal
  ・ Gold flush plated products are also available in a series. The ideal choice can be selected according to the application
  ・ UL standard (file No. E103202) certified product is standard product
  [Applications]
  ・ It can be used in places such as where heat resistance is high and tends to get hot when inserting and removing frequently

  Standard Price:	SGD 1.21-
  Days to Ship:	Same day or more

• 

  Half-Pitch Connector (for Low Profile Stacking Connections) - XH4A

  OMRON

  [Features]
  ・A half-pitch connector with same shaped pins (male) and sockets (female) for stacking connections. Handles heights between circuit boards of 5 mm to 11 mm.
  ・ A half-pitch connector for low profile stacking connections. Handles heights between circuit boards of 5 mm to 11 mm at a pitch of 1 mm (surface mounting types handle heights of 5 mm to 9 mm at a pitch of 1 mm).
  ・ A selection of DIP and surface mounting type (SMT) are available.
  ・ A connector with same shaped pins (male) and sockets (female).
  ・ Standardized stop pins for all contacts to prevent floating and falling during soldering.
  ・ A leaf contact structure that can cope with prying.
  ▪ A UL standard certified product (File No.E103202) (except for SMT type).
  ・Cannot be mated with XH2/XH3 half pitch connector.

  Standard Price:	SGD 6.86-
  Days to Ship:	4 Day(s) or more

• 

  3.3 mm Pitch, Compact Connector For Internal Power Supply, DF33C Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.

  Standard Price:	SGD 0.37-
  Days to Ship:	3 Day(s) or more

• 

  Plastic Connector For Power Supply, EM Series

  HIROSE ELECTRIC

  Maximum 50A. This relay type connector has the largest current capacity in the EnerBee range, and is widely used for wiring in large-scale equipment.

  Standard Price:	SGD 19.16
  Days to Ship:	4 Day(s) or more

• 

  Floating Structured 0.5mm Pitch Connector for Board-to-Board Connection, FX20 Series

  HIROSE ELECTRIC

  0.5mm pitch. The structure features two independent contacts for high contact reliability. It is suitable for harsh conditions such as automotive equipment applications.

  Standard Price:	SGD 3.68-
  Days to Ship:	4 Day(s) or more

Loading...