Coaxial Connectors（Application：For PCB）

• 

  Coaxial Connector BNC Series

  YUETSU SEIKI

  Connector with nominal impedance of 50 Ω.
  [Features]
  ·Corresponding frequency band of DC to 4 GHz.
  ·Bayonet lock connection type connector allows easy connection and disconnection.
  ·There are a wide variety of cable adaptation sizes, and you can select the connector according to the cable.
  ·Available in different shapes, such as circuit-board mount and panel mount, etc.
  [Applications]
  ·It is used for output from various measuring instruments, communication modules, and measurement applications.

  Standard Price:	SGD 6.73-
  Days to Ship:	4 Day(s) or more

• 

  MMCX Connector

  HIROSE ELECTRIC

  The MMCX connector is a small push-on lock coaxial connector.
  
  [Features]
  · Simple push-on format used for easy insertion and extraction.
  · Able to load PCMCIA type II cards: MMCX-LR-SMT (40) have a thickness of 3.51 mm and can be loaded to the back side of type II cards.
  · Moreover, if a 0.36 mm degree of eccentricity from the central card line is used when mounting a card on the circuit board mounting surface, the central card axis and central connector axis will be aligned.
  · Ultra-thin cable compatibility: RG type high frequency coaxial cable... RG-178B/U (⌀1.8), ... RG-316/U (⌀2.59MAX), ⌀1.48 (single layer shield) fluorine resin coaxial cable, ⌀1.32 (double layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.13 (single layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.37 (single layer shield) ultra-thin fluoride resin coaxial cable.
  · Dual terminal connection with other series: Capable of dual terminal connection with U.FL, N, BNC, HRM, and TNC series.
  · Highly coordinated: high frequency traits are realized with a voltage standing wave ratio (V.S.W.R.) of less than 1.2 at a frequency of up to DC 6 GHz (possessing representative value and not compatible with all products).
  ・Compatibility: the opening is standard, allowing for mating with MMCX connectors.

  Standard Price:	SGD 11.82-
  Days to Ship:	4 Day(s) or more

• 

  BNC Connector

  HIROSE ELECTRIC

  BNC connector—a coaxial connector widely used with a variety of equipment.
  A wide variety of different types are available.
  [Features]
  ・ Widely used as a 50 Ω connector. (Also available in 75 Ω type)
  ・ A bayonet lock mechanism that can be easily attached and detached.
  ・ Compatible cable: A coaxial cable with a finished outer diameter of approximately ø3 to ø8. (RG-55 / 58 / U, etc.)
  ・ Applicable standards: Complies with Japan's Ministry of Defense (DSPC6202), Japanese Industrial Standards (JISC5412), and MIL standards.

  Standard Price:	SGD 12.59-
  Days to Ship:	4 Day(s) or more

• 

  MS-147 Series DC up to 6 GHz, Height 3.9 mm Miniature Coaxial Switch

  HIROSE ELECTRIC

  An ultra-small coaxial switch with a mount height of 3.9 mm. Can also be used as an external antenna connector in addition to circuit checking.
  
  [Features]
  · Low insertion losses: 1 GHz TYP when not mated. 0.08 dB 2GHz TYP. Low insertion losses of 0.10 dB.
  · Space saving: The outer dimensions are 5.8 mm x 5.4 mm to save space.
  · Low profile: Working towards profile with height of 3.9mm.
  · Lightweight: Lightweight, weighing 0.11g.
  · Long life: a life span of 12,000 insertions and extractions.
  · Supports automatic mounting: embossed tape allows for automatic mounting.
  · Wide range of use, corresponds to up to DC 6 GHz: Usable with frequencies up to DC 6 GHz.
  ・Lead free: both the receptacle and plug are lead free out of consideration for environmental issues.
  ・Furthermore, the construction takes flux oozing into consideration.
  · Self alignment: ±0.5 mm guide amount when mating with plug.

  Standard Price:	SGD 2.57
  Days to Ship:	4 Day(s) or more

• 

  BNC-RD Series BNC Insulated Receptacle (Circuit Board Mounting Type)

  DDK

  [Features]
  ·This insulated receptacle is a printed circuit board mounting type that mates with the BNC series (plugs).
  ·Reliable insulation achieved between the external conductor of the connector and the panel.
  ▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
  ·As a VA product, this receptacle's contact uses sound or shape (press contact).
  ·The receptacle can be mounted on a printed circuit board either vertically or horizontally.
  ·The height from the printed circuit board is low, at 14.0 mm when the receptacle is mounted horizontally on the printed circuit board.
  · The product can be used in an extensive range of applications, including computers, communication devices, and medical devices.

  Standard Price:	SGD 18.73-
  Days to Ship:	3 Day(s) or more

• 

  SMA Series, Coaxial Connector

  YUETSU SEIKI

  The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics. It can be used at frequencies ranging up to DC–18 GHz.
  
  [Features]
  · The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics.
  · It can be used at frequencies ranging up to DC–18 GHz. However, a model is also available that can be used for particularly high frequencies up to 25 GHz.
  · We offer compatible cables, including semi-rigid cables, semi-flexible cables, and flexible cables for supporting a wide variety of applications.
  · Available in both standard and affordable items depending on the type of body material and surface treatment.

  Standard Price:	SGD 15.28-
  Days to Ship:	3 Day(s) or more

• 

  Coaxial Connector SMB Series

  YUETSU SEIKI

  [Features]
  ▪ The SMB connector is a compact connector featuring a snap-on/ pull-off attachment system, and can be utilized in frequencies ranging up to DC 4 GHz.
  ▪ The SMB series is suitable for applications such as GPS, mobile communications, and wireless LAM.
  ▪ Straight, L-angle, connectors for ultra-thin flexible cables, connectors for semi-rigid cables, and more are available.

  • Volume Discount

  Standard Price:	SGD 6.25-
  Days to Ship:	4 Day(s) or more

• 

  Ultra-Fine Coaxial Cable Connector, UM Series

  HIROSE ELECTRIC

  This is a quick-lock type coaxial connector. · There is a rich selection of product types.
  
  [Features]
  · Optimized for ultra-thin coaxial cables: ultra-small coaxial connector optimized for ultra-thin coaxial cables with high reliability.
  · Lock system: The lock system is the quick lock type system.
  · The quick lock type is regulated by Japan Defense Agency Standard DSPC6205.
  · Connection system: The connection system is the extremely easy-to-use and reliable crimp attachment system.

  Standard Price:	SGD 8.25-
  Days to Ship:	4 Day(s) or more

• 

  SMA Connector, HRM Series

  HIROSE ELECTRIC

  This is a MIL standard coaxial connector, SMA connector. We were the first company to successfully develop this . With high reliability and different variations, it is used with a wide range of equipment.

  Standard Price:	SGD 14.32-
  Days to Ship:	4 Day(s) or more

• 

  SMT Miniature Coaxial Connector, E.FL Series

  HIROSE ELECTRIC

  This small coaxial cable occupies a circuit board area of 9.4 mm².
  
  [Features]
  ・Occupied circuit board area: Compared to the manufacturer of the H.FL series, the occupied circuit board area is reduced by approximately 49% - 56% with an occupied area of 9.2 mm².
  ・Ultra-thin fluorine resin cable: bendable Ø0.81 and Ø1.32 ultra-thin fluorine resin cables are used in an effort to make laying cable easier.
  ・High coordination: the ability to handle high-frequency waves up to DC 2 GHz and a V.S.W.R. of 1.3 or less.
  ・Automatic mount compatibility: the receptacle's embossed packaging allows for automatic mounting.
  ・Easy connector removal: connectors can be easily removed using a removal tool.
  ・Easy mate confirmation: a definite lock feel can be used to confirm mating, even with ultra small models.

  Standard Price:	SGD 2.87-
  Days to Ship:	3 Day(s) or more

• 

  SMT Small Coaxial Connector H.FL Series【100 Pieces Per Package】

  HIROSE ELECTRIC

  This is a small coaxial connector for circuit board mounting. It is low-profile with a height of 3 mm on mating.

  Standard Price:	SGD 115.44
  Days to Ship:	4 Day(s) or more

• 

  Small Push-On Type Coaxial Connectors, MSS Series

  HIROSE ELECTRIC

  Utilizing a slide snap lock method, both the internal and external conductors are in almost perfect contact, providing excellent durability. There are two types of wiring methods used: crimp wire connection and screw clamps. Compliant with Japan Defense Agency DSPC-6206.
  
  [Features]
  • The Japan Defense Agency has enacted a specifications document: DSPC-6206.
  • Every aspect of performance for mid-size connectors is specifically demonstrated, and although the size is exceedingly miniaturized, performance is comparable to mid-sized high frequency connectors.
  • A slide snap locking system is utilized within the external conductor, and this conductor has near complete contact and also demonstrates excellent vibration resistance.
  • Wire connection work can be conducted in a thoroughly simplified and assured manner using one of these two methods: the crimp wire connection method or the screw clamp method.

  Standard Price:	SGD 10.25-
  Days to Ship:	4 Day(s) or more

• 

  MX25 Series

  JAPANAVIATION

  [Features]
  · An on-vehicle coaxial connector compatible with 6 GHz wavelengths (wire relay type).

  Standard Price:	SGD 7.43
  Days to Ship:	3 Day(s) or more

• 

  27CP Series 75 Ω SMB Type Coaxial Connector

  DDK

  [Features]
  · The 27CP series of connectors correspond to a 75 Ω version of the 27DP series of connectors (50 Ω type).
  · This connector, which is representative of small 75 Ω connectors, is frequently used in applications such as interfaces inside devices.
  · The push-on method makes it easy to connect or disconnect.
  · This part is not compatible with the 27DP series.

  Standard Price:	SGD 16.79
  Days to Ship:	4 Day(s) or more

• 

  27DP Series - SMB Type Coaxial Connectors

  DDK

  Connectors are made to be compliant with the SMB type defined in MIL-PRF-39012. Can be used for miniaturization and increasing the density of communications equipment
  
  [Features]
  • The 27DP series correspond to connectors made to be compliant with the SMB (Sub-Miniature Type B) type defined in MIL-PRF-39012.
  · A 50 Ω connector for fine cabling that enables miniaturization and increased density of communications equipment.
  • The coupling mechanism is push-on, and cables are mounted by crimping or soldering.

  Standard Price:	SGD 13.91
  Days to Ship:	4 Day(s) or more

• 

  SMA Connector Receptacles

  TO-CONNE

  [Features]
  · A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
  · The body is made of stainless steel but less expensive brass is also available

  Standard Price:	SGD 10.65
  Days to Ship:	3 Day(s) or more

• 

  Receptacles for SMB Connector PCBs

  TO-CONNE

  [Features]
  · High frequency-compatible connector wherein the connection method used is a push on method primarily designed for size and weight reduction of equipment

  Standard Price:	SGD 5.83-
  Days to Ship:	4 Day(s) or more

Loading...