Test Terminals - Inspections/Measurements for machinery & electrical control | MISUMI South East Asia
Website Upgrade Completed! System improvements are now LIVE to improve your Ordering experience. You may be logged out after the website update, please log in again.
MISUMI WhatsApp service is temporarily unavailable. Kindly contact us via “Chat now”
Test probes are attached to electrical circuits, panelboards, electronic circuits, etc., to test electrical power and signal. Generally, a socket is grounded on the device side for connecting the test cable, and the plug end of the cable is then inserted into the socket for testing. When there are no sockets available, testing can be performed by clipping the probe directly onto the wiring. The clips usually feature a vinyl insulation cover over which the user can hold the clip when attaching the probe onto the wiring. The metal parts of these clips are completely wrapped for applications that require good insulation properties. Also, with miniscule circuits, a stick-shaped probe with a tapered end and connected to an oscilloscope, etc., is used to touch and test the circuit.