Board Heaters / Heat Sinks

• 

  Thermostat TS-120S / ITS-050L

  SHINOHARA ELECTRIC

  For use with temperature controls (power supply switching) pertaining to space heaters, ventilation fans, etc.
  
  [Features]
  · Can be mounted to DIN rail (mounted via the center of the thermoStud body).

  CAD ：

  2D

  Standard Price:	SGD 47.71-
  Days to Ship:	4 Day(s) or more

• 

  Heater, Terminal Block Type

  SHINOHARA ELECTRIC

  Can be used as a heater to prevent dew and moisture inside the panel. Workability is good due to terminal block.
  
  [Features]
  · Easy to work with due to inclusion of terminal block in the wire connecting element.
  · Terminal block is made of polycarbonate rated to 600V / 25A.

  CAD ：

  2D

  Standard Price:	SGD 81.12-
  Days to Ship:	4 Day(s) or more

• 

  General-Purpose Heat Dissipation Diffuser Plate / Heat Shield For Space Heaters

  SHINOHARA ELECTRIC

  [Features]
  ·Heat sink: By guiding the air updraft (heat convection) to a large space inside the panel without obstructing (retaining) it, the temperature rise of various parts installed above the heater is suppressed
  ·Heat shield plate: It blocks the radiant heat from the heater and suppresses the temperature rise of various parts on the side of the heater
  [Materials]
  ·SUS304 t = 1 mm

  Standard Price:	SGD 41.82-
  Days to Ship:	9 Day(s) or more

• 

  Space Heater (200W Compact Type)

  SHINOHARA ELECTRIC

  You can use it as a heater to prevent condensation and moisture inside the panel. The design is more compact than conventional 200W heaters.
  
  [Features]
  ・The 200W standard type has a small heater area and was designed to save space.

  CAD ：

  2D

  Standard Price:	SGD 102.51-
  Days to Ship:	7 Day(s) or more

• 

  Heat Sink for Pin Mounting Device, P Series, Aluminum Extrusion Type

  LSICOOLER

  For TO type mold package devices, for solder fixing

  Standard Price:	SGD 3.48-
  Days to Ship:	3 Day(s) or more

• 

  Enclosure Heater - Continuous Heat Output 10-150 W, No Fan

  RITTAL

  This is a fanless PTC heater. Continuous heating power: A wide range of products are available from 10 W up to 150 W.
  
  [Bundled items]
  · PTC heater, quick clamp connector, anchoring parts

  Standard Price:	SGD 114.90
  Days to Ship:	7 Day(s) or more

• 

  Sheath heater specifications: SSH type

  SHINOHARA ELECTRIC

  Can be used as a heater to prevent dew and moisture accumulation inside the panel. Sheath heater type.
  
  [Features]
  · By using a sheath heater of only 200 W, the overall length isshortened, saving on space.
  · Incorporates a space heater into a heat dissipation cover made of stamped steel plating and can be easily mounted using four mounting screws.

  CAD ：

  2D

  Standard Price:	SGD 67.29-
  Days to Ship:	6 Day(s) or more

• 

  Heatsink LSI V, for Forced Air-Cooled, Hollow, Aluminum Extrusion Type (With Clear Anodizing)

  LSICOOLER

  [Features]
  ・ Semiconductor devices (transistors, CPUs, IGBTs, etc.) used in current electrical and electronic devices may destroy the devices themselves due to the heat generated by the devices if they are not cooled during operation.
  ・ A heatsink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  ・ LSI COOLER continues to pursue high-level performance through technology underpinned by thermal theory in order to achieve highly efficient heat treatment with heatsink.
  ・ This V Series is a series of aluminum extrusion type heatsinks for medium power and forced air cooling.

  Standard Price:	SGD 55.17-
  Days to Ship:	7 Day(s) or more

• 

  Heatsink LSI Cooler M Series

  LSICOOLER

  [Features]
  ・ Semiconductor devices (transistors, CPUs, IGBTs, etc.) used in current electrical and electronic devices may destroy the devices themselves due to the heat generated by the devices if they are not cooled during operation.
  ・ A heatsink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  ・ LSI COOLER continues to pursue high-level performance through technology underpinned by thermal theory in order to achieve highly efficient heat treatment with heatsink.
  ・ The M Series is a series of aluminum extrusion fin type heatsinks classified as multi-purpose and general-purpose types.

  Standard Price:	SGD 12.02-
  Days to Ship:	7 Day(s) or more

• 

  Space Heater with Cover

  SHINOHARA ELECTRIC

  Can be used as a heater to prevent dew and moisture inside the panel.
  
  [Features]
  · Incorporates a space heater into a heat dissipation cover made of stamped steel plating and can be easily mounted using either two or four mounting screws.
  · The design and build are extremely safe, eliminating the risk of direct contact with the heat source.

  CAD ：

  2D

  Standard Price:	SGD 79.87-
  Days to Ship:	4 Day(s) or more

• 

  Space Heaters

  SHINOHARA ELECTRIC

  For preventing dew and moisture from collecting on the inside of panels. - Covers not included.
  
  [Features]
  - Heater element is made from a chrome-plated steel wire wrapped around a mica sheet, then sealed airtight by a galvanized steel or stainless steel plate. It does not come into contact with the air, preventing oxidation or corrosion.
  - Once installed, only periodic inspection is required.
  - Heater element is fixed and completely insulated, ensuring it is safe and can handle heavy vibration.

  CAD ：

  2D

  Standard Price:	SGD 40.89-
  Days to Ship:	4 Day(s) or more

• 

  Heat Sink for Pin Mounting Device, U Series, Plate Type

  LSICOOLER

  Plate fin type for small discrete devices

  Standard Price:	SGD 5.18-
  Days to Ship:	3 Day(s) or more

• 

  Heatsink for Surface Mounting Device SQ Series Aluminum Extrusion/Slit Fin Type

  LSICOOLER

  For heat dissipation for surface mounted devices and LED devices

  Standard Price:	SGD 7.55-
  Days to Ship:	4 Day(s) or more

• 

  Accessory For Heating Enclosure - Thermostat

  RITTAL

  Ideal for heating control. This thermostat can also be used as an alarm sensor to monitor the temperature inside the enclosure.
  
  [Features]
  · Uses a quick connection method whereby the terminal connection can be screwed in from the outside
  · Can be flexibly mounted on a vertical or horizontal 35‑mm rail compliant with EN 50 022,
  or the supplied adapter can be used for snap-type fastening onto the TS enclosure frame or a mounting plate.
  
  [Paint color]
  · RAL 7035
  [Bundled items]
  · Bottom mounting adapter, mounting plate

  Standard Price:	SGD 66.51
  Days to Ship:	7 Day(s) or more

• 

  Accessory For Heating Enclosure - Humidity Sensor

  RITTAL

  Prevents condensation on parts and electronics.
  
  [Features]
  · Uses a quick connection method whereby the terminal connection can be screwed in from the outside
  · Can be flexibly mounted on a vertical or horizontal 35‑mm rail compliant with EN 50 022,
  or the supplied adapter can be used for snap-type fastening onto the TS enclosure frame or a mounting plate.
  
  [Product specifications]
  · Switch contact: ON/OFF switch contact by spring switch
  · Allowable contact capacity: AC approx. 5 (0.2) A (inductive load when cos φ = 0.6) / DC = max. 20 W
  · Setting range: relative humidity 50 to 100%
  · Switching differential approx. 4%
  [Paint color]
  · RAL 7035 (light gray [approximate Munsell value 2.5PB8.5/1)])

  Standard Price:	SGD 189.93
  Days to Ship:	9 Day(s) or more

• 

  Heatsink LSI F Multipurpose, General-Purpose Aluminum Extrusion Type (With Clear Anodizing)

  LSICOOLER

  [Features]
  ・ Semiconductor devices (transistors, CPUs, IGBTs, etc.) used in current electrical and electronic devices may destroy the devices themselves due to the heat generated by the devices if they are not cooled during operation.
  ・ A heatsink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  ・ LSI COOLER continues to pursue high-level performance through technology underpinned by thermal theory in order to achieve highly efficient heat treatment with heatsink.
  ・ The F Series is a series of aluminum extrusion fin type heatsinks classified as multi-purpose and general-purpose types.

  Standard Price:	SGD 7.36-
  Days to Ship:	7 Day(s) or more

• 

  Heatsink LSI Cooler S Series

  LSICOOLER

  [Features]
  ・ Semiconductor devices (transistors, CPUs, IGBTs, etc.) used in current electrical and electronic devices may destroy the devices themselves due to the heat generated by the devices if they are not cooled during operation.
  ・ A heatsink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  ・ LSI COOLER continues to pursue high-level performance through technology underpinned by thermal theory in order to achieve highly efficient heat treatment with heatsink.
  ・ The S Series is a series of heatsinks for mounting on stud type devices and are classified as multi-purpose and general-purpose types.

  Standard Price:	SGD 33.14-
  Days to Ship:	7 Day(s) or more

• 

  Space Heater Minimum Type Heat Sink / Heat Shield For 2-Point Stop

  SHINOHARA ELECTRIC

  [Features]
  ·Heat sink: A punching hole on the top allows some heat to escape. Reduces the risk of workers' hands, falling objects, etc., coming into contact with high-temperature heat sources
  ·Heat shield plate: There is no punching hole on the upper surface, and by blocking heat convection, the heat effect above the heater is suppressed
  [Materials]
  ·Steel plate t = 1.2 mm Electrogalvanized zinc plating trivalent chromate treatment finish (Environmentally friendly electrogalvanized zinc trivalent chromate treated product)

  Standard Price:	SGD 60.57-
  Days to Ship:	9 Day(s) or more

Loading...