Counterbore Cutter PZAG Insert
Caution
- For some items, the data for CAD and CAM / tool management software may not be available when you wish to download them. In that case, please use the download button after selecting the data in the "CAD data" item (2D/3D) or "CAM / tool management software data" under the narrowing down conditions.
Product Description
Square type insert with 4-corner specifications. The muscle breaker achieves outstanding cutting chip separation capability.
Product features and specifications
Basic specifications and features of the product
Features
Cutting chip breaking capacity is the most important because counterbore processing is done by continuous cutting
- Achieves outstanding cutting chip breaking capacity with a muscle breaker that is greatly raised against the cutting edge
Rich lineup
Size lineup that matches dimensional standard for the counterbore of hex socket head cap screws (compatible with bolt screw sizes M8 to M52)
Performance/test information
■Processing data
Counterbore processing of S50C
In counterbore processing for M16 hex socket head cap screws, fragmented cutting chips were discharged and stable continuous processing was possible.
Counterbore processing of SS400 large parts
Drawing
Type 1
Type 2
Recommended cutting conditions
Recommended cutting condition table
Common for counterbore processing and plunge processing
Precautions for cutting conditions
1. This cutting condition standard table shows general values at actual cutting speed. Please adjust appropriately according to the processing environment.
2. When installing the insert, remove scratches and dirt, and then install it firmly.
3. Hold the work material firmly so that it does not deform, bend, or vibrate.
Compatible work material
Selection support information
Recommended material for each work material
◎: First recommended material, O: Second recommended material
Counterboring cutter, straight shank type, PZAG SS
Type 1
Type 2
| Tool No. | Nominal | Outer diameter Dc | Number of flutes Z | Overall length L | Body length Lf | Effective processing depth le | Shank diameter Ds | Shank length ls | Minimum Pilot hole diameter *1) | ae *2) | Compatible insert | Shape Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7832100 | PZAG04R014SS20-2 | 14 | 2 | 100 | 30 | 21 | 20 | 70 | 6 | 4 | (1) | 1 |
| 7832101 | PZAG06R0175SS20-2 | 17.5 | 105 | 35 | 26 | 5.5 | 6 | (2) | ||||
| 7832102 | PZAG06R020SS20-2 | 20 | 110 | 40 | 30 | 8 | ||||||
| 7832103 | PZAG06R023SS25-2 | 23 | 125 | 50 | 34.5 | 25 | 75 | 11 | ||||
| 7832104 | PZAG09R026SS25-2 | 26 | 130 | 55 | 39 | 8 | 9 | (3) | ||||
| 7832105 | PZAG09R029SS32-2 | 29 | 140 | 60 | 43.5 | 32 | 80 | 11 | ||||
| 7832106 | PZAG09R032SS32-2 | 32 | 145 | 65 | 48 | 14 | ||||||
| 7832107 | PZAG09R035SS32-2 | 35 | 150 | 70 | 52.5 | 17 | 2 | |||||
| 7832108 | PZAG09R039SS32-2 | 39 | 160 | 80 | 58.5 | 21 | ||||||
| 7832109 | PZAG09R043SS32-2 | 43 | 170 | 90 | 64.5 | 25 | ||||||
| 7832110 | PZAG09R048SS32-2 | 48 | 180 | 100 | 72 | 30 |
(1) to (3) are equivalent to the compatible insert numbers in the parts table.
*1) Indicates the minimum value of the pilot hole when performing counterbore processing.
Counterboring cutter, bore type, PZAG BORE
| Tool No. | Nominal | Outer diameter Dc | Number of flutes Z | Cutter height Lf | Effective processing depth le | Boss diameter Db | Hole diameter d | Hole diameter depth l | Flange keyway | Minimum Pilot hole diameter *1) | ae Note 2) (max) | Compatible insert | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Width a | Depth b | ||||||||||||
| 7832111 | PZAG13R054M22-4 | 54 | 4 | 63 | 35 | 45 | 22 | 21 | 10.4 | 6.3 | 29 | 12.5 | (4) |
| 7832112 | PZAG13R058M22-4 | 58 | 38 | 33 | |||||||||
| 7832113 | PZAG13R062M22-4 | 62 | 41 | 37 | |||||||||
| 7832114 | PZAG13R067M22-4 | 67 | 44 | 42 | |||||||||
| 7832115 | PZAG13R072M22-4 | 72 | 47 | 47 | |||||||||
| 7832116 | PZAG17R076M22-4 | 76 | 50 | 44 | 16 | (5) | |||||||
| 7832117 | PZAG17R082M22-4 | 82 | 54 | 50 | |||||||||
(4) and (5) are equivalent to the compatible insert numbers in the parts table.
*2) Maximum depth of cut during plunge processing (ae)
*) 2
Part
Please purchase the wrench separately.