AE-VMSS Carbide Anti-Vibration End Mill, Stub Type (Long Neck Type)
Caution
- Use rigid, high-precision products for machinery and holders. Adjust the rotation speed and feed rate according to the usage conditions (workpiece retaining strength, machinery rigidity etc.) Use a low-smoking cutting oil that is also suitable for the work material. For dry-type milling, remove the chips using an air blower so that they do not clog the hole. When milling stainless steel, it is recommended to use water-soluble cutting oil. For precision machining, reduce the rotation speed, feed rate and cutting depth.
Product Description
[Features]
· The DUARISE coating offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Also, the smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance. The new flute form achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and reduced burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.
The difference is clearly shown in the quality of slot milling!
There are hardly any burrs generated during slot milling, which is a proof of stable milling.
Poor chip evacuation and excessive cutting force are the main causes of unstable milling, which leads to the generation of burrs.
The AE-VMS is able to achieve stable performance with minimal burrs even in slot milling at a depth of 10mm.
Stable Performance
Low Cutting Force
• Sharp positive rake angle reduces cutting force.
• New flute form with high tool rigidity and excellent chip evacuation properties enables stable milling and the suppression of burrs.
10% lower cutting force versus the competitors
High Efficiency
Suppression of Vibration
Unequal spacing of teeth and variable-lead geometry enables stable and high efficiency milling
Superior Surface Quality
DUARISE Coating
high oxidation temperature.
Multi-layer construction minimizes the thermal cracks that often
occurred while using water soluble oil.
• Smoothing surface coating treatment made an excellent quality
of surface finishing.
Cutting Data
Suppression of Heat Generation
Suppression of cutting heat generation minimizes tool wear
Surface roughness after milling 11.2m
Tool condition after milling 156.8m
Stable Performance
Normal wear with no chipping even in slot milling
Stable Performance
Stable performance even in slotting
Wear comparison after milling 68.6m
High Efficiency
Trouble-free chip evacuation even in high-speed slotting
Long Tool Life
DUARISE coating enables consistent tool wear
Wear comparison after milling 196m
Deep Side Milling
Great surface finish with no chattering