(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Throw-Away Drill, GEN3 32 Series

Throw-Away Drill, GEN3 32 Series

[Features]
· Achieves machining cost reductions through high speed, high feed, high efficiency, and scrap management
· Larger scrap pocket
· X thinning with excellent centripetality
· Low resistance blade tip shape

(i)Caution

  • Use a holder and tip from the same series. Direct grooving is recommended if the coolant pressure is 3.5 MPa or more. Periodically replace the holder after the tip has been exchanged about 100 times.

Part Number

Configured Part Number is shown.

60332H-40FM

Part Number
60332H-40FM
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

SGD 832.16

1 Piece(s) 12 Day(s) or more

Loading...

  1. 1

Basic Information

Hole diameter (drill diameter) D(mm) 32.00 to 35.00 Overall Length L(mm) 227.7 Shank Type straight shank
Maximum Machining Length(mm) 105.0 3D Body Length(mm) 161.3 Shank Diameter x Length(mm) ø40 x 70
Pipe Screw 1/4" Applicable Clamp Screw 7495-IP15-10 Applicable Screwdriver 8IP-15 (Sold Separately)
Accessories Clamp Screw x 4, Screw Seizing Prevention Agent (Easy-Break) Shape Torsional Groove Type

Please check the type/dimensions/specifications of the part 60332H-40FM in the Throw-Away Drill, GEN3 32 Series series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)