90° Angle Attachment

90° Angle Attachment

[Features]
· Ideal for speedy polishing of flat surfaces using a polishing disk pad.
· Can be used for a wide range of machining, from rough machining to mirror finishing.
· The built-in gear reduces speed by 3/4.

Part Number

Configured Part Number is shown.

EIC-300

Part Number
EIC-300
Part NumberVolume DiscountDays to ShipAccessory Mass
(g)
4 Day(s) or more Spanner (20 × 24): 1 pc. / Dedicated chuck wrench (K-231): 1 pc. / 1 set of standard accessory tools54

Loading...

  1. 1

Basic Information

Product Type Main Body Type Handpiece Accessory Available
Standard collet(mm) ø3.0 (CHC-3.0) Dimensions(mm) 64.3 (Excluding the projection) tip angle(°) 90
Maximum rotational speed(min-1) 30,000 or less Reduction ratio 3/4

Please check the type/dimensions/specifications of the part EIC-300 in the 90° Angle Attachment series.

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)