(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

End Mill Grinder for High-Speed Steel, APL-13

End Mill Grinder for High-Speed Steel, APL-13

[Features]
・ 2- and 4-flute end mills can be reground with a simple operation
·High-precision polishing is possible in the range from ⌀4.0 to 13.0.

Part Number

Configured Part Number is shown.

APL-13

Features

●The bottom blade of the 2 or 4 bladed end mill is capable of regrinding with a simple operation.
●High precision polishing is possible within the range of Φ4.0 to 13.0.

Usage

●For regrinding the bottom blade of worn end mill.

Specification

●Motor Rotation Speed(rpm):5620
●Grindable Size(mm):4 to 13(4 blades are from 6.0mm)
●Whetstone:Electrodeposition CBN#170(for high-speed steel)
●SPQ(piece):1
●Power Supply: Single phase 100V 
●Power Cord Length: 1.9m 
●Shank Diameter: 4, 6, 8, 10, 12mm
●Number of Blades: 2 blades, 4 blades 
●End Cutting Edge Shape: Square 
●Bottom Blade Angle: Clearance Angle 6°, Third Angle 20°, Gash Angle 30° 
●Output: 90W 
●Motor

Accessories

●5 holder pipes, holder rings for 4 blades, holder rings for 2 blades, holder case, 2 hexagonal wrenches, brush, power cord
Part Number
APL-13
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

SGD 3,517.08

1 Piece(s) 12 Day(s)

Loading...

  1. 1

Basic Information

Product Type Drill Polishing Machine Motor Rotation Speed (Details)(rpm) 5620 Grindstone Material Electro Deposition CBN#170 (For high speed)
Shank diameter(mm) 4、6、8、10、12 Number of flutes 2 blades, 4 blades Motor Rated Time(Minute) 15
Power Supply(V) Single-phase 100 Output(W) 90 Polishable Size(mm) 4–13 (4 blades are 6.0 mm - )
JAN Code 4582247450375 Trusco Code 481-5165 Width(mm) 220
Depth(mm) 220 Height(mm) 200 Mass(g) 4800
Cord Length(m) 1.9 Base Blade Shape Square Features · End flutes of end mills with 2 and 4 blades can be repolished through simple operations. · Highly accurate polishing is possible in the range of φ4.0 to 13.0.
Application For re-polishing worn end mill cutting edges. Accessory Holder pipe x 5, holder ring for 4 blades, holder ring for 2 blades, holder case, hex wrench x 2, brush, power cord Bottom Blade Angle(°) Recess Angle 6, 3rd Angle 20, Gash Angle 30

Please check the type/dimensions/specifications of the part APL-13 in the End Mill Grinder for High-Speed Steel, APL-13 series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)