(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Rolled auto-slide knurled holder (for iris eyes)

Rolled auto-slide knurled holder (for iris eyes)

[Features]
· With initial position setting mechanism for knurled retaining parts. Auto-centering based on vertical auto-slide mechanism (±2.5 mm from initial position) eliminates differences in rolling force generated with two knurled wheels to allow for knurled processing at an even groove depth.
· Holder for rolled type diamond knurled processing.
[Applications]
· Applicable model: shank diameter: 20 x 20 mm.

Part Number

Configured Part Number is shown.

Features

● With the initial position setting mechanism of the knurling holding part.
● Automatic alignment by upper and lower auto slide mechanism (±2.5mm from initial position) eliminates the rolling force gener-ated in 2 knurl pieces, and enables knurling processing with uniform groove depths.
● A holder for rolling diamond knurling

Specification

●Machining Diameter(mm):10 to 250
●SPQ(piece):1
● Compatible Model: Lathe
Part Number
KH1
KH2
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipWidth×Height×Length
(mm)
Compatible Knurled Piece JAN Code Trusco Code Mass
(g)

SGD 336.50

1 Piece(s) 7 Day(s) 20×16×130KN12CRL~FRL4967521179287270-0905410

SGD 356.40

1 Piece(s) 7 Day(s) 20×20×147KN30CRL~FRL4967521179294270-0913580

Loading...

  1. 1

Basic Information

Product Type Holder Machining Diameter(mm) 10~250 Compatible Model Lathe
Features · With initial position setting mechanism for knurled support parts. Auto-align based on vertical auto-slide mechanism (±2.5 mm from initial position) eliminates differences in rolling force generated with two knurled wheels to allow for knurled processing at an even groove depth. · Holder for rolling type diamond knurling processing. Application Compatible model: shank diameter: 20×20 mm

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)