(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Taper Gauge for Measuring Right Angles

Taper Gauge for Measuring Right Angles

Click this image to zoom it.

Move the mouse over the image to zoom

  • Taper Gauge for Measuring Right Angles
  • Taper Gauge for Measuring Right Angles

Taper gauge enables measurement in locations where the scale markings cannot be viewed from above.
[Features]
· Dedicated inner width measurement taper gauge.
· Place one side along the measurement surface to enable stabler measurement than with an ordinary taper gauge.
· Measurement is possible in areas where scale markings cannot be viewed from above because the scale is located on the side.
[Applications]
· Used for measurement of grooves, gaps, etc.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

TPG-700T

What is taper gauge

It is a gauge that uses the graduations which showing the width, thickness
and diameter to indicate the width and section of diuerence of gap.

Instructions for use

For gap width measuring, insert the gauge into the gap of the measuring object for
graduation reading that’s without reach.
  • For section of difference measuring, place gauge by the side with section of
    difference horizontally for graduation reading at the same height.
Part Number
TPG-700T
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

SGD 21.96

1 Piece(s) 11 Day(s)

Loading...

  1. 1
 

Basic Information

Measuring Range(mm) 1~15 Scale 0.1 Product Dimension(mm) 148.5
Taper angle 7°9' 10" Mass(g) 10 Material Quenched Stainless Steel (SUS420J2)
Instrument Error(mm) ±0.05 Feature 1 · Dedicated taper gauge for internal measurements. Aligning one surface with the measurement surface facilitates more stable measurement than with ordinary taper gauges. · Since scale will be located on the side during measurement, measurement is possible in areas where scale markings cannot be viewed from above. Use Measurement of Slots, Gaps, Etc.

Please check the type/dimensions/specifications of the part TPG-700T in the Taper Gauge for Measuring Right Angles series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)