(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L

Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L

[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.

Part Number

Configured Part Number is shown.

Part Number
DTFNR2020K16
DTFNR3225P16
DTFNR3232P27
DTFNR-3232P-27
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipShank height
(mm)
Shank width
(mm)
Function Width
(mm)
Function Height
(mm)
Function Length
(mm)
Dimension L3
(mm)
Tip Size Gauge Chip Torque
(Nm)

SGD 183.30

1 Piece(s) 10 Day(s) 2020252012523.616TNMG 16 04 081.7

SGD 212.60

1 Piece(s) 10 Day(s) 3225323217024.116TNMG 16 04 081.7

SGD 259.20

1 Piece(s) 10 Day(s) 3232403217038.127TNMG 27 06 126.4

SGD 236.94

1 Piece(s) 10 Day(s) 3232403217038.127TNMG 27 06 126.4

Loading...

  1. 1

Basic Information

Applicable Tip Shape T (Triangle) Application End Face Clamp Shape Cable clamp
Selfishly Right-hand Applicable Tip Clearance Angle Type Negative Rake angle(°) -6
Blade Inclination Angle(°) -6 Lead Angle(°) -1 Cutting Angle(°) 91
Clearance angle(°) 0

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)