(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L

Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L

[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.

Part Number

Configured Part Number is shown.

Part Number
DRSNL2525M12
DRSNL3225P15
DRSNL3232P19
DRSNL4040S25
DRSNL-3232P-19
DRSNL-4040S-25
DRSNR2525M12
DRSNR3225P15
DRSNR4040S25
DRSNR-4040S-25
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipSelfishly Shank height
(mm)
Shank width
(mm)
Function Width
(mm)
Function Height
(mm)
Function Length
(mm)
Dimension L3
(mm)
Tip Size Gauge Chip Torque
(Nm)
Trusco Code

SGD 190.70

1 Piece(s) 8 Day(s) Left-hand2525322515031.612RNMG 12 04 003.9570-6033

SGD 209.50

1 Piece(s) 8 Day(s) Left-hand3225323217038.515RNMG 15 06 006.4609-7022

SGD 255.40

1 Piece(s) 8 Day(s) Left-hand3232403217042.619RNMG 19 06 006.4609-7031

SGD 346.90

1 Piece(s) 10 Day(s) Left-hand4040504025050.525RNMG 25 09 009.5-

SGD 236.94

1 Piece(s) 8 Day(s) Left-hand3232403217042.619RNMG 19 06 006.4-

SGD 315.54

1 Piece(s) 10 Day(s) Left-hand4040504025050.525RNMG 25 09 009.5-

SGD 190.70

1 Piece(s) 8 Day(s) Right-hand2525322515031.612RNMG 12 04 003.9-

SGD 212.60

1 Piece(s) 10 Day(s) Right-hand3225323217038.515RNMG 15 06 006.4-

SGD 346.90

1 Piece(s) 10 Day(s) Right-hand4040504025050.525RNMG 25 09 009.5-

SGD 315.54

1 Piece(s) 10 Day(s) Right-hand4040504025050.525RNMG 25 09 009.5-

Loading...

  1. 1

Basic Information

Applicable Tip Shape R (Circular) Application Outer Diameter / End Face / Profiling / Chamfer Clamp Shape Cable clamp
Applicable Tip Clearance Angle Type Negative Rake angle(°) -6 Blade Inclination Angle(°) -6
Lead Angle(°) 45 Cutting Angle(°) 45 Clearance angle(°) 0

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)