(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting" (CNMG090408HQ-CA515)

Part Number

Configured Part Number is shown.

CNMG090408HQ-CA515

Part Number
CNMG090408HQ-CA515
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Shipwork material Nose R Trusco Code Material

SGD 7.88

10 Piece(s) 4 Day(s) or more Steel0.8-0.8CA515

Loading...

  1. 1

Basic Information

Shape C (80° Diamond) Application Outer Diameter / Inner Diameter Available corners 4
Breaker Use Medium Cutting Rake angle Negative Selfishly No Preferred Hand

Please check the type/dimensions/specifications of the part CNMG090408HQ-CA515 in the Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting" series.

Similar Part Numbers

Part Number
CNMG090404HQ-PV720
CNMG090404HQ-TN60
CNMG090404HQ-TN620
CNMG090408HQ-CA525
CNMG090408HQ-CA5515
CNMG090408HQ-CA5525
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Shipwork material Nose R Trusco Code Material

SGD 6.41

10 Piece(s) 4 Day(s) or more Steel / Stainless Steel0.4820-5115-PV720

SGD 7.55

10 Piece(s) 4 Day(s) or more Steel / Stainless Steel / Cast Iron0.4-0.4TN60

SGD 5.75

10 Piece(s) 4 Day(s) or more Steel / Stainless Steel0.4820-5116-TN620

SGD 7.88

10 Piece(s) 4 Day(s) or more Steel0.8-0.8CA525

SGD 7.44

10 Piece(s) 4 Day(s) or more Steel0.8-0.8CA5515

SGD 7.44

10 Piece(s) 4 Day(s) or more Steel0.8-0.8CA5525

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)