Dustless Paper For Use In Cleanrooms (OK Clean RN)

Caution
- Product image is for representation and may differ from actual product.
- Please check product catalog information and part number below before placing order.
Product Description
Office/printer paper with little dust generation.
[Features]
· Office equipment made from carefully selected pulp and special resin, enabling ultra-low generation of dust when used in cleanrooms.
· Neutralized paper that is ideal for storage as it does not cause rust generation, discoloration, or corrosion when it comes in contact with metal.
· Quality and economy have been realized by permeation with a special resin with disaggregative properties, and recycling is possible.
[Applications]
· Printing by hand or printer in a cleanroom.
Printer Paper That Does Not Generate Dust Even When The Fibers Are Torn Off Due To Careful Selection Of Pulp And Impregnation Of A Special Resin

Clean pack in units of 1 ream (250 sheets).
Product Range Of Dust-Free Paper For Cleanrooms (OK Clean RN)
| Part No. | Model Number | Size (mm) | Quantity | Note / JAN Code |
|---|---|---|---|---|
| 9-5639-01 | A3 | 420 × 297 | 1 case (5 reams included) | |
| 9-5639-02 | A4 | 297 × 210 | 1 case (10 reams included) | |
| 9-5639-03 | B4 | 364 × 257 | 1 case (5 reams included) | |
| 9-5639-04 | B5 | 257 × 182 | 1 case (10 reams included) |
Performance Properties And Quality Properties Of Dust-Free Paper For Clean Rooms (OK Clean RN)
Performance Properties
The values are for ≤0.3 µm dust (particles/0.02 CF)

Perform the following tests inside the clean bench, absorb 0.02 CF (cubic feet) of air during the test and measure the dust using the particle counter.
Crumpling: Hold both short sides of one sheet of an A4 sample, and crumple together for 2 minutes at a rate of 1 time/5 seconds.
Rubbing: Mount such that the front and back sides overlap on the rotating disk and fixing plate of the rubbing tester for a 14 cm × 14 cm rubbing sample, and rub them together for 2 minutes.
(Rotational speed: 500 rpm; contact torque: 1 kg·cm)
Tester: Rion Co., Ltd. KC-14 Particle Counter.
Quality Properties
| Item | Unit | 9-5638-01 To 06 | 9-5639-01 To 06 9-5640-01 To 06 | |
|---|---|---|---|---|
| Constant Paper Weight | g/m2 | 72 | 64 | |
| GSM | g/m2 | 72 ± 3 | 64 ± 3 | |
| Thickness | µm | 99 ± 5 | 88 ± 5 | |
| Density | g/cm3 | (0.73) | (0.73) | |
| Smoothness | F Surface | sec | 40 ± 10 | 40 ± 10 |
| W Surface | sec | 40 ± 10 | 40 ± 10 | |
| Tensile Strength | Vertical | kN/m | 3.3 or more | 3.3 or more |
| Paper Surface pH | 6.5 ± 0.5 | 6.5 ± 0.5 | ||
| Dust Generation Amount | Crumpling | pc./0.02 CF (>0.3 µm) | 5 or less | 5 or less |
| Rubbing | 5 or less | 5 or less | ||
| Breakage | 10 or less | 10 or less |