Glass Panel (Clear)
Brand :
AS ONE
Caution
- Product image is for representation and may differ from actual product.
- Please check product catalog information and part number below before placing order.
Product Description
Transparent glass plate made of soda lime glass.
[Features]
· A transparent glass instrument for use in laboratory work.
· Refractive Index: approx. 1.52.
· Reflectance: Approximately 4% on one surface.
Specifications Of Clear Glass Plate Made Of Soda-Lime Glass
- Refractive index: Approx. 1.52
- Reflection rate: Approx. 4% on one side
- Softening temperature: 720 to 730°C
- Specific gravity: Approx. 2.5
- Hardness: Approx. 6 (Mohs hardness)
Physical And Mechanical Properties Of Plate Glass
| Item | Value |
|---|---|
| Refractive Index | Approx. 1.52 |
| Reflection rate (vertical incidence)*1 | Approx. 4% On One Side |
| Specific Heat | 837 J/kg·K, 0.2 cal/g°C (0 To 50°C) |
| Softening Temperature*2 | 720 to 730°C |
| Thermal Conductivity | 1 W/m·K, 0.86 kcal/mh°C |
| Linear Expansion Coefficient | 8.5 To 9 × 10-6/°C (Normal Temperature To 350°C) = 1/K |
| Specific Gravity | Approx. 2.5 |
| Hardness*3 | Approx. 6 (Mohs hardness) |
| Young's Modulus | 7.16 × 104 MPa 730,000 kgf/cm2 |
| Poisson’s Ratio | 0.23 |
| Mean Breaking Stress*4 | Approx. 49 MPa Approx. 5,000 kgf/cm2 |
| Weather Resistance*5 | No Change |
- *1Light is reflected by both surfaces of the glass, and the reflection rate on one side is 4%.
Transparent plate glass has almost no absorption within the glass,
so the reflection rate per piece is approximately 8%. Moreover, the reflection rate increases with oblique incidence. - *2Value measured according to ASTM C338-57
The glass has no clear melting point, and the viscosity decreased continuously with increasing temperature. This figure is the temperature at a viscosity of 4.5 × 107 Poise. - *3Mohs hardness
5: Phosphate, 6: Feldspar, 7: Quartz. - *4Glass is always broken by surface tensile stress.
- *5It is not possible to say that the surface has absolutely no scratches, weathering, etc, but there will be no actual change to the essential qualities of the interior. *The values on the table are general values showing the physical/mechanical properties and do not guarantee the performance of any product.
Refractive Index (No Unit)
| Glass | Water | Benzine | Crystal | Diamond |
|---|---|---|---|---|
| 1.52 | 1.33 | 1.50 | 1.54 | 2.42 |
Thermal Conductivity (kcal/mh°C)
| Glass | Aluminum | Steel | Rubber |
|---|---|---|---|
| 0.86 | 190 | 41 | 0.33 |
| 1 W/m·K | 221 W/m·K | 48 W/m·K | 0.38 W/m·K |
Specific Gravity (No Unit)
| Glass | Steel | Diamond | Polycarbonate Sheet (LEXAN) | Pine/Japanese Cedar |
|---|---|---|---|---|
| 2.5 | 7.9 | 3.5 | 1.2 | 0.5 |
Specific Heat (cal/g°C)
| Glass | Steel | Granite | Aluminum | Polycarbonate Sheet (LEXAN) | Water |
|---|---|---|---|---|---|
| 0.2 | 0.11 | 0.2 | 0.22 | 0.26 to 0.28 | 1.0 |
| 837 J/kg·K | 460 J/kg·K | 837 J/kg·K | 921 J/kg·K | 1,088 to 1,172 J/kg·K | 41,86 J/kg·K |
Linear Expansion Coefficient (×10-6/°C)
| Glass | Polycarbonate Sheet (LEXAN) | Aluminum | Copper | Steel | Wood |
|---|---|---|---|---|---|
| 8.5 to 9 | 68 | 23 | 16 | 11 | 5 to 8 |
Young’s Modulus (kgf/cm2)
| Glass | Steel | Aluminum | Concrete | Polycarbonate Sheet (LEXAN) |
|---|---|---|---|---|
| 730,000 | 2,100,000 | 700,000 | 200,000 | 21,000 to 25,000 |
| 7.16 × 104 MPa | 2.1 × 105 MPa | 6.9 × 104 MPa | 2.0 × 104 MPa | 2.1 to 2.5 × 103 MPa |