Tool Setter i

Tool Setter i

Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.

[Features]
· Developed for machining centers with ceramic spindles.
· Can also be used for non-conductive workpieces because of the internal contact system.
· Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
· A magnet is attached to the bottom to support both vertical and horizontal use.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

I-50

Part Number
I-50
Part NumberVolume DiscountDays to ShipMass
(g)
Applicable Product System Measurement pressure Repetitive accuracy Battery (included) Minimum measured tool diameter Sensor Plate Stroke
(mm)
Magnetization Force LED Contact pressure Remark
4 Day(s) or more 200For Small Diameter Drills / End MillsInternal contact type0.2N±0.001mmSilver Oxide Battery SR-44 x 2φ0.05-φ6 mm supportedAlumina Oxide Ceramic1.56NHigh Luminosity, Blue0.2NUse the NS Tool Setter M-50 for cutting tools that are larger than the area of the measuring surface (φ6).

Loading...

  1. 1

Basic Information

Product Classification Measuring Equipments Body Sizes(mm) φ40×50 Body Dimension Tolerance(mm) 0~+0.005

Please check the type/dimensions/specifications of the part I-50 in the Tool Setter i series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)