Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

Part Number

Configured Part Number is shown.

Part Number
TWFGTR050-KW10
TWFGTR050-PR1025
TWFGTR080-KW10
TWFGTR080-PR1025
TWFGTR100-KW10
TWFGTR100-PR1025
TWFGTR125-KW10
TWFGTR125-PR1025
TWFGTR150-KW10
TWFGTR150-PR1025
TWFGTR180-KW10
TWFGTR200-KW10
TWFGTR200-PR1025
Part NumberVolume DiscountDays to ShipMaterial φAMIN.
(mm)
φAMAX.
(mm)
B
(mm)
W
(mm)
θ
3 Day(s) or more KW106 (0)∞ (∞)1.00.51.5°
5 Day(s) or more PR10256 (0)∞ (∞)1.00.51.5°
5 Day(s) or more KW106 (0)∞ (∞)1.50.81.5°
3 Day(s) or more PR10256 (0)∞ (∞)1.50.81.5°
5 Day(s) or more KW106 (0)∞ (∞)2.21
3 Day(s) or more PR10256 (0)∞ (∞)2.21
5 Day(s) or more KW106 (0)∞ (∞)2.21.25
5 Day(s) or more PR10256 (0)∞ (∞)2.21.25
5 Day(s) or more KW106 (0)∞ (∞)2.21.5
3 Day(s) or more PR10256 (0)∞ (∞)2.21.5
5 Day(s) or more KW106 (0)∞ (∞)3.01.8
5 Day(s) or more KW106 (0)∞ (∞)3.02
3 Day(s) or more PR10256 (0)∞ (∞)3.02

Loading...

  1. 1

Basic Information

Preferred Hand Right Handed rε(mm) 0.05

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)