(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Micro Drill, 15 × D, Type-N 6412

Micro Drill, 15 × D, Type-N 6412

Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machining

PDF

Japanese Only

Part Number
6412-001.400
6412-001.500
6412-001.590
6412-001.600
6412-001.700
6412-001.800
6412-001.900
6412-001.980
6412-002.000
6412-002.100
6412-002.200
6412-002.300
6412-002.380
6412-002.400
6412-002.500
6412-002.600
6412-002.700
6412-002.780
6412-002.800
6412-002.900
6412-003.000
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) d1
(mm)
Groove Length l2
(mm)
Overall Length L1
(mm)

SGD 254.93

1 Piece(s) 22 Day(s) or more 1.42562

SGD 254.93

1 Piece(s) 6 Day(s) or more 1.52762

SGD 291.01

1 Piece(s) 23 Day(s) or more 1.592962

SGD 254.93

1 Piece(s) 22 Day(s) or more 1.62962

SGD 279.59

1 Piece(s) 22 Day(s) or more 1.73170

SGD 279.59

1 Piece(s) 6 Day(s) or more 1.83270

SGD 279.59

1 Piece(s) 22 Day(s) or more 1.93470

SGD 319.53

1 Piece(s) 23 Day(s) or more 1.983670

SGD 290.19

1 Piece(s) 6 Day(s) or more 23670

SGD 290.19

1 Piece(s) 6 Day(s) or more 2.13878

SGD 331.51

1 Piece(s) 22 Day(s) or more 2.24078

SGD 355.25

1 Piece(s) 22 Day(s) or more 2.34278

SGD 355.25

1 Piece(s) 23 Day(s) or more 2.384478

SGD 311.26

1 Piece(s) 22 Day(s) or more 2.44478

SGD 311.26

1 Piece(s) 6 Day(s) or more 2.54578

SGD 311.26

1 Piece(s) 22 Day(s) or more 2.64787

SGD 355.25

1 Piece(s) 22 Day(s) or more 2.74887

SGD 370.97

1 Piece(s) 23 Day(s) or more 2.785087

SGD 325.35

1 Piece(s) 22 Day(s) or more 2.85087

SGD 325.35

1 Piece(s) 22 Day(s) or more 2.95287

SGD 348.39

1 Piece(s) 22 Day(s) or more 35487

Loading...

  1. 1
 

Basic Information

work material general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum Tool Material Type Carbide Coating Y/N Available
Coating Type Other With/without Oil Hole Available Number of flutes(sheet) 2
Tip angle(°) 135 Shank diameter d2(mm) 4 Standard G.S.
Internal oil supply Available Blade diameter tolerance h7 Shank diameter tolerance h6
Coating Details superA

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)