Magnetic Nozzle (for Holding Cutting Fluid)

Magnetic Nozzle (for Holding Cutting Fluid)

[Features]
· The powerful 800 N magnet makes it easy to install in any position.
· The angle and direction of the nozzle are freely adjustable.
· The additional Rc1/4 screw holes allow two nozzles to be used.
· Two independent screw holes are available.
[Applications]
· For cutting fluid lubrication.

Part Number

Configured Part Number is shown.

TMN-1-S

Features

●800N Powerful magnet allows easy installation in any position.
●Additional threaded holes Rc1/4 are drilled so you can use two nozzles.

Usage

●For cutting fluid supply.

Specification

●Number of Nozzles:1
●Nozzle Length(mm):320
●Adhesion Strength(N):800
●SPQ(set):20
●Adaption fluid: water- soluble cutting fluid, oil cutting fluid
Part Number
TMN-1-S
Part NumberVolume DiscountDays to ShipFeatures Application Nozzle number Nozzle Length
(mm)
Hole Diameter Adsorption Power (N) Valve Maximum Operating Liquid Pressure
(kg/cm2)
Mass Cutting Fluid Inlet Specifications
4 Day(s) or more The powerful 800 N magnet makes it easy to install in any position. The angle and direction of the nozzle are freely adjustable. The additional Rc 1/4 screw holes allow two nozzles to be used. Two independent screw holes are available.For cutting fluid lubrication.13201/4800Available3.461,400 g/set13.5mmCompatible Fluid: aqueous cutting solution, oil-based cutting solution

Loading...

  1. 1

Basic Information

Product Category Heating and Cooling Equipment Trusco Code 219-8592

Please check the type/dimensions/specifications of the part TMN-1-S in the Magnetic Nozzle (for Holding Cutting Fluid) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)