Keyless Chuck

Keyless Chuck

[Features]
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Mainly installed onto boring machines for attaching drills.

Part Number

Configured Part Number is shown.

KL-130N

Features

●Chuck handle is unnecessary, it is possible to attach/detach the drill by just turning by hand.
●When the centrifugal force is generated in the spindle rotation direction, it is an internal design that increases naturally the grasping force.

Specification

●Grasping Capacity(mm):0.5 to 13
●Connection Taper:JT6
●Outer Diameter(mm):50.5
●Total Length(mm):105
●Swinging accuracy 5/100mm or less

Warning

●Can not be used with tapping board.
Part Number
KL-130N
Part NumberVolume DiscountDays to ShipMass
(g)
Features Gripping ability
(mm)
Accuracy
(mm)
Connection Taper Specifications
3 Day(s) or more 1030The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone. It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction. Mainly used mounted on lathes to mount a drill.0.5~130.05JT6Runout Accuracy 5/100 mm or Less /

Loading...

  1. 1

Basic Information

Product Category Attachments/Accessories Outer Diameter(mm) 50.5 Overall Length(mm) 105
Trusco Code 150-7516

Please check the type/dimensions/specifications of the part KL-130N in the Keyless Chuck series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)