(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 21/4/2024 to 6:00 (SGT) 22/4/2024. We apologize for the inconvenience.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Electric Circular Dividing Table (DEFS500-6)
[Features]
· Outstanding durability and high functionality. Super Divider greatly contributes to time saving in process transfer.
| Part Number |
|---|
| DEFS500-6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Mass (g) | Index Number | Table diameter (mm) | Table surface height (mm) | Electric motor | Motor | Allowable Load Mass Allowable Moment of Inertia (Kg·m2) | Allowable Load Mass Load Mass (Assuming Disc) (kg) | Jig table maximum diameter (mm) | Indexing Time (sec) | Inspection Item 1. Runout of Table Center Hole (mm) | Inspection Item 2. Runout on Table Top (mm) | Inspection Item 3. Parallelism Between Table Top and Bottom (mm) | Inspection Items 6. Index Accuracy (Cumulative) | Allowable Friction Torque (N·m) | Allowable Work Load (N) Vertical Load | Allowable Work Load (N) Horizontal Load | Allowable Work Load (N) Circumferential Load | Clamp Intensifier | Lubrication |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 14 Day(s) | 250000 | 6 | 500 | 200 | 200V 3-Phase 100 W | Motor Lower Mounting Type | 15.85 | 300 kg with ø650 | 730 | 50Hz:1.8/60Hz:1.5 | 0.01 | 0.02 (Within 10 mm from table outer diameter) | 0.04 (Within 10 mm from table outer diameter) | Within 40 seconds (Depends on optical measuring device) | 15 | 15000 | 7000 | 2500 | Special specification, pneumatic/hydraulic type, heavy cutting | Grease Lubrication (Plunger Part Is Oil Lubrication Type) |
Loading...
Basic Information
| Product Category | Attachments/Accessories | Table rotation direction | Can go left or right (the standard is seen from above in a clockwise direction) | Table 1 Rotation Stop Instruction | Special Specification |
|---|---|---|---|---|---|
| Operating Box | Standard supplies (with cord and connector) |
Please check the type/dimensions/specifications of the part DEFS500-6 in the Electric Circular Dividing Table series.
Specification/Dimensions
-
type
- DEF
- DEFS
-
Mass(g)
-
Index Number
- 3
- 4
- 6
- 8
- 12
-
Table diameter(mm)
-
Table surface height(mm)
- 115
- 160
- 200
- 235
- 300
-
Electric motor
- 200 V 3-Phase 40 W
- 200 V 3-Phase 60 W
- 200V 3-Phase 100 W
- 200 V 3-Phase 200 W
- 200 V 3-Phase 400 W
-
Motor
- Motor Lateral Mounting Type
- Motor Lower Mounting Type
Days to Ship
-
- All
- 14 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| DEF200-6 |
| DEF200-8 |
| DEF320-12 |
| DEFS500-8 |
| DEFS630-12 |
| DEFS630-3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Mass (g) | Index Number | Table diameter (mm) | Table surface height (mm) | Electric motor | Motor | Allowable Load Mass Allowable Moment of Inertia (Kg·m2) | Allowable Load Mass Load Mass (Assuming Disc) (kg) | Jig table maximum diameter (mm) | Indexing Time (sec) | Inspection Item 1. Runout of Table Center Hole (mm) | Inspection Item 2. Runout on Table Top (mm) | Inspection Item 3. Parallelism Between Table Top and Bottom (mm) | Inspection Items 6. Index Accuracy (Cumulative) | Allowable Friction Torque (N·m) | Allowable Work Load (N) Vertical Load | Allowable Work Load (N) Horizontal Load | Allowable Work Load (N) Circumferential Load | Clamp Intensifier | Lubrication |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 7,281.86 | 1 Piece(s) | 14 Day(s) | 28000 | 6 | 200 | 115 | 200 V 3-Phase 40 W | Motor Lateral Mounting Type | 0.56 | 50 kg at φ300 | 360 | 50Hz:0.8/60Hz:0.7 | 0.01 | 0.01 (Within 10 mm from table outer diameter) | 0.03 (Within 10 mm from table outer diameter) | 60 sec max (according to optical measuring device) | 7.5 | 5000 | 2500 | 1000 | - | Grease Lubrication (Plunger Part Is Oil Lubrication Type) | ||
SGD 7,281.86 | 1 Piece(s) | 14 Day(s) | 28000 | 8 | 200 | 115 | 200 V 3-Phase 40 W | Motor Lateral Mounting Type | 0.56 | 50 kg at φ300 | 360 | 50Hz:0.8/60Hz:0.7 | 0.01 | 0.01 (Within 10 mm from table outer diameter) | 0.03 (Within 10 mm from table outer diameter) | 60 sec max (according to optical measuring device) | 7.5 | 5000 | 2500 | 1000 | - | Grease Lubrication (Plunger Part Is Oil Lubrication Type) | ||
- | 1 Piece(s) | 14 Day(s) | 100000 | 12 | 320 | 160 | 200 V 3-Phase 60 W | Motor Lateral Mounting Type | 3.13 | 100 kg At ø500 | 530 | 50Hz:1.0/60Hz:0.8 | 0.01 | 0.01 (Within 10 mm from table outer diameter) | 0.03 (Within 10 mm from table outer diameter) | 60 sec max (according to optical measuring device) | 10 | 10000 | 5000 | 2000 | - | Grease Lubrication (Plunger Part Is Oil Lubrication Type) | ||
- | 1 Piece(s) | 14 Day(s) | 250000 | 8 | 500 | 200 | 200V 3-Phase 100 W | Motor Lower Mounting Type | 15.85 | 300 kg with ø650 | 730 | 50Hz:1.8/60Hz:1.5 | 0.01 | 0.02 (Within 10 mm from table outer diameter) | 0.04 (Within 10 mm from table outer diameter) | Within 40 seconds (Depends on optical measuring device) | 15 | 15000 | 7000 | 2500 | Special specification, pneumatic/hydraulic type, heavy cutting | Grease Lubrication (Plunger Part Is Oil Lubrication Type) | ||
- | 1 Piece(s) | 14 Day(s) | 400000 | 12 | 630 | 235 | 200 V 3-Phase 200 W | Motor Lower Mounting Type | 45 | 560 kg At ø800 | 980 | 50Hz:2.5/60Hz:2.1 | 0.01 | 0.02 (Within 10 mm from table outer diameter) | 0.04 (Within 10 mm from table outer diameter) | Within 30 s (Depends on optical measurement device) | 20 | 20000 | 8000 | 3000 | Special specification, pneumatic/hydraulic type, heavy cutting | Grease Lubrication (Plunger Part Is Oil Lubrication Type) | ||
- | 1 Piece(s) | 14 Day(s) | 400000 | 3 | 630 | 235 | 200 V 3-Phase 200 W | Motor Lower Mounting Type | 45 | 560 kg At ø800 | 980 | 50Hz:5.2/60Hz:4.3 | 0.01 | 0.02 (Within 10 mm from table outer diameter) | 0.04 (Within 10 mm from table outer diameter) | Within 30 s (Depends on optical measurement device) | 20 | 20000 | 8000 | 3000 | Special specification, pneumatic/hydraulic type, heavy cutting | Grease Lubrication (Plunger Part Is Oil Lubrication Type) |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?