(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Rolling Center 100 With Stickers

Rolling Center 100 With Stickers

[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
· V seal is adopted and suitable when cutting oil is used.

Part Number

Configured Part Number is shown.

 

 

Part Number
R102-301
R102-321
R103-301
R103-302
R103-317
R103-321
R103-322
R103-327
R104-301
R104-302
R104-317
R104-321
R104-322
R104-327
R105-302
R105-322
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipShank MT No Tip Carbide Insert (Y/N) Type A
(mm)
B
(mm)
B1
(mm)
C
(mm)
C1
(mm)
D
(mm)
E
(mm)
e
(mm)
L
(mm)
Super Hard Diameter

SGD 406.31

1 Piece(s) 10 Day(s) or more MT2N/ATool 102A37231069436.527.7-133.2-

SGD 648.33

1 Piece(s) 10 Day(s) or more MT2YesSeal 102A, with Carbide37231069436.527.7-133.26

SGD 422.34

1 Piece(s) 10 Day(s) or more MT3N/ASeal 103A41261485.54.54231-158.5-

SGD 422.34

1 Piece(s) 10 Day(s) or more MT3N/ASeal 103B4126-85.54.54231-158.5-

SGD 483.84

1 Piece(s) 10 Day(s) or more MT3N/ASeal 103-17A41261285.54.5424020167.5-

SGD 657.01

1 Piece(s) 10 Day(s) or more MT3YesSeal 103A, with Carbide41261485.54.54231-158.58

SGD 677.38

1 Piece(s) 10 Day(s) or more MT3YesSeal 103B, with Carbide4126-85.54.54231-158.510

SGD 661.34

1 Piece(s) 10 Day(s) or more MT3YesSeal 103-17A, with Carbide41261285.54.5424020167.510

SGD 477.05

1 Piece(s) 10 Day(s) or more MT4N/ASeal 104 A453018108.55.35233-193.5-

SGD 477.05

1 Piece(s) 10 Day(s) or more MT4N/ASeal 104 B4530-108.55.35233-193.5-

SGD 547.79

1 Piece(s) 10 Day(s) or more MT4N/ASeal 104-17A453012108.55.35245.520206-

SGD 748.30

1 Piece(s) 10 Day(s) or more MT4YesSeal 104A, with Carbide453018108.55.35233-193.510

SGD 838.29

1 Piece(s) 10 Day(s) or more MT4YesSeal 104B, with Carbide4530-108.55.35233-193.514

SGD 775.85

1 Piece(s) 10 Day(s) or more MT4YesSeal 104-17A, with Carbide453012108.55.35245.52020610

SGD 698.50

1 Piece(s) 10 Day(s) or more MT5N/ASeal 105 B6542-1386.365.947.6-251.5-

SGD 1,010.70

1 Piece(s) 10 Day(s) or more MT5YesSeal 105B, with Carbide6542-1386.365.947.6-251.518

Loading...

  1. 1

Basic Information

Type Rotation Center / Lathe Center Features -17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from the tip of the center, it does not interfere on the entry of the cutting tool. It has V seal and is ideal for the use of cutting oil. Deflection at Center (Max.) TIR0.005

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)