• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

Cyclone

Features

●Made in Japan polishing cloth is used, super low cost flapdisc that is made in Japan. 
●Noise is small, spark is also less, it is safe.
●Since it is a polishing cloth, there is no occurrence of secondary burrs after grinding, the finished surface is fine

Usage

●Remove welding bead.
●Burring/chamfering. 
●Rust removal.

Specification

●Q'ty Per Pack(sheet):10
●Max Working Peripheral Velocity: 72m/s(4300m/min)
Part Number
CY10015A-40
CY10015A-60
CY10015A-80
CY10015A-100
CY10015A-120
CY10015A-150
CY10015A-180
CY10015A-240
CY10015A-320
CY10015A-400
CY10015Z-40
CY10015Z-60
CY10015Z-80
CY10015Z-100
CY10015Z-120
Part NumberVolume DiscountDays to ShipParticle Size
(#)
Abrasive Grain Number of Blades
(Sheets)
Trusco Code Mass
(g)
Features Use Maximum Operating Peripheral Speed
3 Day(s) or more 40A Abrasive Grain60396-703464Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 60A Abrasive Grain72396-705162Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 80A Abrasive Grain72396-706957Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 100A Abrasive Grain72396-697655Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 120A Abrasive Grain72396-698449Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 150A Abrasive Grain72396-699254Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 180A Abrasive Grain72396-700056Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 240A Abrasive Grain72396-701850Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 320A Abrasive Grain72396-702649Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 400A Abrasive Grain72396-704245Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 40Z Abrasive Grain60396-709372Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 60Z Abrasive Grain72396-710770Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 80Z Abrasive Grain72396-711566Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 100Z Abrasive Grain72396-707760Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)
3 Day(s) or more 120Z Abrasive Grain72396-708558Very low cost flap disc made in Japan using Japanese-made abrasive cloth. Low noise, and is safe as few sparks are generated. Secondary burring does not occur after grinding due to use of an abrasive cloth, and the finished surface is finer and cleaner compared to a grinding stone. Excellent autogenesis, it continually exposes new abrasive grain without causing clogging.For removing welding beads. Deburring. Chamfering. Removing rust.72m/s(4320m/min)

Loading...

  1. 1

Basic Information

Type Multiblade Disc Outer Diameter Size(mm) 100 Inner Diameter Size(mm) 15
Blade Length(mm) 18 Maximum Operating Rotational Speed(rpm) 13600 Quantity(Sheets) 10

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)