• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

Lever Test (Auto Clutch)

Lever Test (Auto Clutch)

[Features]
· It has improved sensitivity for dimensional displacement compared to a dial gauge.
· The probe and indicator are made from non-magnetic materials, so they are not influenced by the magnetic force.
· Using an auto-clutch mechanism without a switching lever, the measuring direction is switched automatically between forward and reverse.
· The probe can be set to an arc angle of 220°.
[Applications]
· For measuring the exterior, interior, grooves and finding the center.

Part Number

Configured Part Number is shown.

Part Number
LT-352
LT-353
LT-355
LT-358
Part NumberVolume DiscountDays to ShipScale interval minimal display
(mm)
Measuring Range
(mm)
Measured force
(N)
Scale specification Minimum Display
(mm)
Trusco Code Mass
(g)
Features Application Dial diameter
(mm)
4 Day(s) or more 0.010~0.80.20 or Less0-40-00.01102-943675Has improved sensitivity for minute size displacement compared to dial gauge. Uses non-magnetic probe/guideline and not affected by magnet force. Uses auto clutch mechanism without switching lever for automatic switching of forward/reverse measuring directions. Probe can be set over 220° arc angle.For measuring the exterior, interior, grooves and finding the center.35
4 Day(s) or more 0.010~0.80.20 or Less0-40-00.01102-944475Has improved sensitivity for minute size displacement compared to dial gauge. Uses non-magnetic probe/guideline and not affected by magnet force. Uses auto clutch mechanism without switching lever for automatic switching of forward/reverse measuring directions. Probe can be set over 220° arc angle.For measuring the exterior, interior, grooves and finding the center.35
4 Day(s) or more 0.0020~0.280.25 or Less0-140-00.002102-945275Has improved sensitivity for minute size displacement compared to dial gauge. Uses non-magnetic probe/guideline and not affected by magnet force. Uses auto clutch mechanism without switching lever for automatic switching of forward/reverse measuring directions. Probe can be set over 220° arc angle.For measuring the exterior, interior, grooves and finding the center.38.4
4 Day(s) or more 0.0010–0.20.25 or Less0-100-00.001102-946175Has improved sensitivity for minute size displacement compared to dial gauge. Uses non-magnetic probe/guideline and not affected by magnet force. Uses auto clutch mechanism without switching lever for automatic switching of forward/reverse measuring directions. Probe can be set over 220° arc angle.For measuring the exterior, interior, grooves and finding the center.38.4

Loading...

  1. 1

Basic Information

Application Lever Type (Indicator) Display Method Dial Maximum Measurement Length (Range Selection)(mm) 0–1
Scale type Balance Scale Mounting shaft diameter(mm) 6

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)