Champion Solid, End Mill NC-2

Part Number

Configured Part Number is shown.

 
Part Number
NC-2-0.5
NC-2-0.6
NC-2-0.7
NC-2-0.8
NC-2-0.9
NC-2-1
NC-2-1.1
NC-2-1.2
NC-2-1.3
NC-2-1.4
NC-2-1.5
NC-2-1.6
NC-2-1.7
NC-2-1.8
NC-2-1.9
NC-2-2
NC-2-2.5
NC-2-3
NC-2-3.5
NC-2-4
NC-2-4.5
NC-2-5
NC-2-5.5
NC-2-6
NC-2-6.5
NC-2-7
NC-2-7.5
NC-2-8
NC-2-8.5
NC-2-9
NC-2-9.5
NC-2-10
NC-2-11
NC-2-12
Part NumberVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
(γ) Neck Angle
(°)
Manufacturer Code
5 Day(s) or more 0.51335901-00212-00050
5 Day(s) or more 0.61.2335901-00212-00060
5 Day(s) or more 0.71.4335901-00212-00070
5 Day(s) or more 0.81.6335901-00212-00080
5 Day(s) or more 0.91.8335901-00212-00090
5 Day(s) or more 12445901-00212-00100
5 Day(s) or more 1.12445901-00212-00110
5 Day(s) or more 1.22.5445901-00212-00120
5 Day(s) or more 1.32.5445901-00212-00130
5 Day(s) or more 1.43445901-00212-00140
5 Day(s) or more 1.53445901-00212-00150
5 Day(s) or more 1.63445901-00212-00160
5 Day(s) or more 1.74445901-00212-00170
5 Day(s) or more 1.84445901-00212-00180
5 Day(s) or more 1.94445901-00212-00190
5 Day(s) or more 24445901-00212-00200
5 Day(s) or more 2.55445901-00212-00250
5 Day(s) or more 36645901-00212-00300
5 Day(s) or more 3.57645901-00212-00350
5 Day(s) or more 48645901-00212-00400
5 Day(s) or more 4.59645901-00212-00450
5 Day(s) or more 510650901-00212-00500
5 Day(s) or more 5.511650901-00212-00550
5 Day(s) or more 612655-01-00212-00600
5 Day(s) or more 6.513655-01-00212-00650
5 Day(s) or more 714860901-00212-00700
5 Day(s) or more 7.515860901-00212-00750
5 Day(s) or more 816860-01-00212-00800
5 Day(s) or more 8.517860-01-00212-00850
5 Day(s) or more 9181065901-00212-00900
5 Day(s) or more 9.5191065901-00212-00950
5 Day(s) or more 10201070-01-00212-01000
5 Day(s) or more 11221275901-00212-01100
5 Day(s) or more 12241275-01-00212-01200

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / Stainless Steel / Aluminum / Copper / Resin Number of flutes(sheet) 2 Type Square
Coating Non-Coated Machining Application Flat Surface / Side Surface / Groove Blade tip shape With Lead
Torsion Angle (θ) Standard Helix (30 to 40°)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:02pm (Saturday)